Ozito WDVB-1312 Manual de Usario

Ozito aspiradora WDVB-1312

Lee a continuación 📖 el manual en español para Ozito WDVB-1312 (8 páginas) en la categoría aspiradora. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

Angled Nozzle, Concentrator

Nozzle, Crevice Tool, Floor Tool &

2 x Extension Tubes

1.8m Hose, Foam Filter & Cartridge

Filter & Lid

Shoulder Strap & Mounting Ring,

Noise Diffuser, Blower Adaptor &

4 x Castor Wheels

2-IN-1

WET & DRY

VACUUM / BLOWER

1300W 30L / 360KM/H

INSTRUCTION MANUAL

SPECIFICATIONS

Mains Voltage: 220–240V ~ 50-60Hz

Input Power: 1300W

Max. Suction Power: 120mbar

Inlet Air Flow: 45-60L/s

Tank Capacity: 30L

Max. Air Speed: 360km/hour

Hose Diameter: Ø64mm

Hose Length: 1.8m

Weight: 8.4kg

WDVB-1312

STANDARD EQUIPMENT

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: valve adapters

and accessories.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

2-in-1 Wet & Dry Vacuum/ Blower

0919

ONLINE MANUAL

Scan this QR Code with

your mobile device to take

you to the online manual.

Attaching The Feet & Castors

1. Press in the tabs on the latches to

release the tank lid.

2. Remove the tank lid and empty the tank

of all accessories.

3. Turn the tank upside down and

insert a castor foot into the slot on

the side of the tank.

4. Insert a screw into the hole

and tighten with a Philips head

screwdriver (not supplied).

5. Repeat steps 3 & 4 with the other 3 castor wheels.

6. Turn the tank right side up and replace the lid.

Note: Always ensure that the latch tabs have clicked back into place

and the tank lid is securely attached.

Noise Di󰀨user

The di󰀨user can be used

for quieter operation during

vacuuming.

1. Insert the locking end onto the

blower port and turn clockwise

to lock it into place.

Attaching The Blower Strap

For easier usage, the strap can be used to carry the Blower unit on

your shoulder when it is detached from the vacuum tank.

1. Insert one end of the

mounting ring into the blower

unit and pull the other end

around the front of the unit.

2. Attach the clip on the strap to

the mounting ring. Adjust the

strap as necessary.

1. Cord Hook

2. Blower Release Button

3. Carry Handle

4. On/O󰀨 Button

5. Strap Mounting Ring

6. Concentrator Nozzle

7. Blower Port

8. Noise Di󰀨user

9. Blower Intake Lid

10. Floor Tool

11. Angled Nozzle

12. Castor Wheel

13. Vacuum Tank

14. Lid Latch

15. Accessory Storage Slot

16. Drain Outlet Cap

17. Vacuum Port

18. Tank Lid

19. Crevice Tool

20. Extension Tube

2-IN-1 WET & DRY VACUUM / BLOWER

ACCESSORIES

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

21. 1.8m Hose

22. Foam Filter

23. Cartridge Filter & Lid

24. Blower Adaptor

21 22 23 24

75 64

WARNING! ENSURE THE TOOL IS TURNED OFF

AND DISCONNECTED FROM THE POWER SUPPLY

BEFORE PERFORMING ANY OF THE FOLLOWING

OPERATIONS.

Fitting the Cartridge Filter - Vacuuming Dry Matter

The cartridge lter should come pre-assembled onto the vacuum unit.

However it is still a good idea to check that it has not come loose

during transport and is still properly tted before use.

For dry vacuum cleaning always

use the cartridge lter. Mount

the lter so that no air is sucked

through the lter cage without

rst being ltered.

1. Press the at end of the

cartridge lter onto the lter

cage until it is stopped by the

step in the lid part.

2. Place the lter lid on the

bottom of the lter and turn

the handle clockwise to lock it

into place.

3. To remove the lter, turn the lter lid handle anti-clockwise to

release it. Remove both the lter lid and cartridge lter.

NOTE: Do not use the foam lter when vacuuming dry matter.

Fitting the Foam Filter - Vacuuming Liquid

For wet-vacuuming, slip the

supplied foam lter over the lter

cage.

NOTE: Do not use the cartridge

lter when vacuuming liquid.

WARNING! SWITCH OFF THE EQUIPMENT IF LIQUID

OR FOAM IS EMITTED WITH THE EXHAUST AIR

WHEN WET VACUUM CLEANING.

WARNING! THE WET & DRY VACUUM IS NOT

SUITABLE FOR THE VACUUMING OF COMBUSTIBLE

LIQUIDS.

WARNING! WHEN WET VACUUMING, THE

SAFETY FLOAT STOPS THE VACUUM SUCTION

AUTOMATICALLY WHEN THE MAXIMUM CAPACITY

IS REACHED. TURN OFF THE VACUUM & EMPTY

THE TANK BEFORE CONTINUING TO VACUUM.

Draining Liquids From The Tank

Spills and puddles can be vacuumed directly into the tank with the

foam lter tted for easy clean up and disposal.

Note: When vacuuming large quantities of liquid, do not immerse the

nozzle completely into the liquid, leave a gap at the nozzle/tool to

allow air inow.

1. Hold the vacuum over a laundry sink or household drain.

Note: Only dispose of liquid waste into household sinks & drains

if safe to do so. Improper disposal of hazardous waste can cause

pollution and harm.

2. Turn the drain outlet cap

anti-clockwise to loosen and

remove it.

3. Allow any collected liquid

in the tank to ow out.

Tip the vacuum slightly

to allow any liquid at the

bottom of the tank to ow

out too.

4. Rinse out the tank if

necessary and replace the

drain outlet cap.

2. FILTER SELECTION 3. WASTE DISPOSAL

WARNING! NEVER USE THE WET & DRY VACUUM

CLEANER WITHOUT A FILTER. ALWAYS ENSURE

THAT THE FILTERS ARE PERFECTLY SECURE.

Especificaciones del producto

Marca:	Ozito
Categoría:	aspiradora
Modelo:	WDVB-1312
Color del producto:	Zwart
Peso.:	4000 g
Ancho:	220 mm
Profundidad:	114 mm
Altura:	340 mm
Tecnología de conectividad:	Bedraad
Energía promedio:	70 W
Uso recomendado:	Universeel
Impedancia:	8 Ohm
Canales de salida de audio:	1.0 kanalen
Colocación de los altavoces:	Tabletop/bookshelf, Wall-mountable
Número de conductores:	1
altavoz de graves:	Ja
Salida máxima de potencia musical (PMPO):	500 W
Rango de frecuencia:	75 - 23000 Hz
Sensibilidad:	87 dB
Tipo de altavoz:	2-weg
Diámetro del altavoz de graves:	130 mm
Número de controladores de woofer:	1
Diámetro hogetonenluidspreker:	27 mm
Número de controladores de tweeter:	1
tweeter:	Ja
Frecuencia de cruce:	2700 Hz