Ozito ZLIDS-012 Manual de Usario
Ozito
Handgereedschap
ZLIDS-012
Lee a continuación 📖 el manual en español para Ozito ZLIDS-012 (6 páginas) en la categoría Handgereedschap. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/6
IMPACT
DRIVER
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 12V
Chuck: 6.35mm Hex Quick Connect
No Load Speed: 0-2,200/min
Impact Rate: 3,000bpm
Max Torque 110Nm
Tool Weight: 0.88kg
ZLIDS-012
WHAT’S IN THE BOX
Cordless
Impact Driver
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1017
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Drive Bit Retaining Ring
2 LED Light
3 Variable Speed Trigger
4 Belt Hook
5 Battery Seating
6 Forward/Reverse Lever
CORDLESS IMPACT DRIVER
KNOW YOUR PRODUCT
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
1. ACCESSORY FITMENT
SETUP & PREPARATION
1 2 5 64
1. Pull the drive retaining ring
forward.
3. Release the drive bit retaining
ring then pull on the bit to
ensure it is rmly in place.
4. To remove, pull the drive
retaining ring forward &
remove the driving bit.
2. Insert the hex shank of the
appropriate (1/4”) driver bit.
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
CAUTION! DO NOT HANDLE ACCESSORIES WITHOUT
GLOVES AS THEY ARE SHARP AND CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY.
Inserting & Removing Accessories
3
2. FITTING THE BATTERY 3. CONTROLS
2. To remove, press
and hold the battery
release tab and then
slide out
OPERATION
1. Align the ribs of the
battery with the recess
at the base of the of
the tool and push in
until it clicks into place.
Inserting and Removing the Battery Variable Speed Trigger
Forward/Reverse Lever
3. Control the speed by
adjusting the amount of
pressure applied to the
trigger.
2. To remove screws and
bolts, push the fwd/rev
lever hard right.
1. To start the driver,
squeeze the variable
speed trigger.
2. Release the variable
speed trigger to stop the
driver.
1. To drive screws and
bolts, push the fwd/rev
lever hard left.
REV
FWD
Slower Faster
Especificaciones del producto
| Marca: | Ozito |
| Categoría: | Handgereedschap |
| Modelo: | ZLIDS-012 |
¿Necesitas ayuda?
Si necesitas ayuda con Ozito ZLIDS-012 haz una pregunta a continuación y otros usuarios te responderán
Handgereedschap Ozito Manuales
29 Septiembre 2024
Handgereedschap Manuales
- Handgereedschap IKEA
- Handgereedschap Ambiano
- Handgereedschap Silverline
- Handgereedschap Hazet
- Handgereedschap Velleman
- Handgereedschap Powerfix
- Handgereedschap Panduit
- Handgereedschap Victa
- Handgereedschap Wera
Últimos Handgereedschap Manuales
28 Septiembre 2024
28 Septiembre 2024
28 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024
27 Septiembre 2024
25 Septiembre 2024
25 Septiembre 2024
19 Septiembre 2024