Ozito ZLRWS-040 Manual de Usario

Ozito No categorizado ZLRWS-040

Lee a continuación 📖 el manual en español para Ozito ZLRWS-040 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
10mm 11mm 12mm 13mm 14mm 15mm 17mm14mm
RATCHET
WRENCH
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 12V
No Load Speed: 0-230/min
Max. Torque: 35Nm
Drive Shaft: 3/8” (9.5mm) Square
Tool Weight: 1.25kg
ZLRWS-040
STANDARD EQUIPMENT
Cordless
Ratchet Wrench
8 x CRV Sockets &
3/8”Female to ¼”
Male Adaptor
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1220
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
10mm 11mm 12mm 13mm 14mm 15mm 17mm
14mm
Attaching Sockets
1. To attach a socket, align the 3/8”
socket with the drive shaft and push it
rmly into tool.
2. To use 1/4” sockets on the ratchet
wrench, push the supplied adaptor
onto the drive shaft. Then attach
the desired 1/4” socket (not
supplied) to the other end of the
adaptor.
3. To remove the socket, pull the
accessory away from the drive shaft.
Note: Ensure sockets and accessories
are attached properly before use.
1. Forward/Reverse Dial
2. Handle
3. Battery Seating
4. Variable Speed Trigger
5. Trigger Lock
6. Drive Shaft
7. 3/8” 10 x 28mm Socket
8. 3/8” 11 x 28mm Socket
9. 3/8” 12 x 28mm Socket
10. 3/8” 13 x 28mm Socket
11. 3/8” 14 x 28mm Socket
12. 3/8” 14 x 63mm Socket
13. 3/8” 15 x 28mm Socket
14. 3/8” 17 x 30mm Socket
15. 3/8”F to ¼”M 25mm Adaptor
CORDLESS RATCHET WRENCH
KNOW YOUR PRODUCT
ACCESSORIES
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
1 2
34
7 8 9 10 12 13 14 1511
6 5
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND THE BATTERY IS DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
1. ASSEMBLY
SETUP & PREPARATION
11mm
11mm
Inserting and Removing The Battery
1. Align the ribs of the battery
with the recess in the battery
seating and push it until it
clicks into place.
2. To remove, press and hold
the battery release tab and
then slide out.
Trigger Lock
To lock the variable speed
trigger, slide the trigger lock to
the locked position.
To unlock the variable speed
trigger, slide the trigger lock to
the unlocked position.
Note: Always lock the variable speed trigger when tool is under
maintenance, changing accessories, storing tool or any time tool is
not in use.
Variable Speed Trigger
1. Slide the trigger lock towards
the front of the tool to unlock
the variable speed trigger.
2. Squeeze the variable speed
trigger to start the tool. Control
the speed by adjusting the
amount of pressure applied to
the trigger.
3. Release the variable speed
trigger to stop the wrench.
4. Slide the trigger lock towards
the back of the tool when
done to prevent accidental
starting.
2. BATTERY FITMENT 3. CONTROLS
OPERATION
a.
b.
a.
b.

Especificaciones del producto

Marca: Ozito
Categoría: No categorizado
Modelo: ZLRWS-040

¿Necesitas ayuda?

Si necesitas ayuda con Ozito ZLRWS-040 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Ozito Manuales

Ozito

Ozito PXBSPS-180 Manual de Usario

6 Octubre 2024
Ozito

Ozito SSH-240 Manual de Usario

6 Octubre 2024
Ozito

Ozito PXTLS-905 Manual de Usario

3 Octubre 2024
Ozito

Ozito ADWH-913V Manual de Usario

2 Octubre 2024
Ozito

Ozito PXBLEK-418 Manual de Usario

24 Septiembre 2024
Ozito

Ozito DMC-1000 Manual de Usario

21 Septiembre 2024
Ozito

Ozito PXMFTS-018 Manual de Usario

19 Septiembre 2024
Ozito

Ozito PXBCSS-184 Manual de Usario

15 Septiembre 2024
Ozito

Ozito PXPPS-1820 Manual de Usario

14 Septiembre 2024
Ozito

Ozito PXNGS-218 Manual de Usario

14 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024