Palsonic HDSTB200 Manual de Usario

Palsonic receptor HDSTB200

Lee a continuación 📖 el manual en español para Palsonic HDSTB200 (45 páginas) en la categoría receptor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/45
HDSTB200
High Definition Digital Receiver
User Manual
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Safety Information
CAUTION
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK,
DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
The lightning flash with arrowhead symbol within an equilateral triangle,
is intended to alert the user to the presence of uninsulated dangerous
voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and servicing instructions
In the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WATER OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK. ENSURE 240V AC POWER
PLUG IN FULLY INSERTED INTO THE POWER SOCKET.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE MANUFACTURER WILL VOID THE USER'S WARRANTY.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO ENSURE RELIABLE OPERATION AND PREVENT THE HS-STB
FROM OVER HEATING, YOU MUST REMOVE THE PROTECTIVE
PLASTIC FILM FROM THE HS-STB COVER.
WARNING:
Important Safeguards
These important safeguard messages will help ensure your enjoyment and proper
use of the HD-STB and accessories. Please read them carefully before you begin
to operate your HD-STB product.
1. Read and Retain this User's Guide
This User's Guide should be read before the HD-STB is operated and retained for
future reference
2. Use Correct Power
This HD-STB should be operated only from the type of power source indicated on
the rear panel.
3. HD-STB Installation
Do not place HD-STB on an unstable trolley stand, tripod, bracket, or table as it
may fall, causing serious injury to a child or adult and damage the HD STB.
4. Provide Antenna Ground
If an outside antenna or cable system is connected to the HD-STB, be sure the
antenna or cable system is grounded to provide some protection against
voltage surges and built-up static charges. An outside antenna system should not
be located in the vicinity or overhead power lines, or other power circuits, where
it can fall onto such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching or approaching such
power lines or circuits as contact with them might be fatal. Installing an outdoor
antenna can be hazardous and should be left to a professional antenna installer.
5. Provide Proper Ventilation
Opening slots in the STB cabinet are provided for ventilation to ensure reliable
STB operation and to protect it from overheating. HD-STB should not be located
in an enclosed / built-in installation such as a bookcase unless proper ventilation
is provided.
For sufficient ventilation, there must be at least 10cm free air space above,
behind, top and on each side of the HD-STB.
6. Keep Away from Heat
Do not expose the HD-STB to direct sunlight. This product should be situated
away from heat sources such as radiators, heat registers, stoves and other
electronic products (including amplifiers) that produce heat.

Especificaciones del producto

Marca: Palsonic
Categoría: receptor
Modelo: HDSTB200

¿Necesitas ayuda?

Si necesitas ayuda con Palsonic HDSTB200 haz una pregunta a continuación y otros usuarios te responderán




receptor Palsonic Manuales

receptor Manuales

Últimos receptor Manuales