Panduit EE001 Manual de Usario

Lee a continuación 📖 el manual en español para Panduit EE001 (1 páginas) en la categoría humidificador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Customer Service: CS@panduit.com 800.777.3300 Technical Support: techsupport@panduit.com 866.405.6654
page 1
I N S T A L L A T I O N G U I D E
Spot Fluid Leak Sensor (EE001)
The Spot Fluid Leak Sensor is designed to reliably monitor a remote
location for the presence of water or any other conductive liquid (with
resistivity of less than 2M ohms per cm). The sensor can be extended (up
to 30.5 m) using a standard RJ-45 coupling.
Note: The Spot Fluid Leak Sensor is only designed to connect to an
iPDU. Connecting it to another device may result in damage.
SPECIFICATION
Electrical
Requirement
Operational voltage
5V DC
Range
0 to 4m/s
Accuracy
± °5% (25 FS C characteristic)
Physical
Wire Length
3 m
Wire Type
CAT.5E Patch Cable, UTP
Environmental
Temperature (Operating/Storage)
0°C~+60°C (32 ~ 140°F)/-20~ + 70°C (-4 ~ 158°F)
Humidity (Operating/Storage)
35% to 85% non RH, -condensing
Compliance
Environmental Verication
ROHS, WEEE
INVENTORY

Especificaciones del producto

Marca: Panduit
Categoría: humidificador
Modelo: EE001

¿Necesitas ayuda?

Si necesitas ayuda con Panduit EE001 haz una pregunta a continuación y otros usuarios te responderán




humidificador Panduit Manuales

humidificador Manuales

Últimos humidificador Manuales