Paradigm PT-2 Manual de Usario

Paradigm sistema de alta fidelidad PT-2

Lee a continuación 📖 el manual en español para Paradigm PT-2 (2 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

SAFETY PRECAUTIONS:

Read this section carefully

before proceeding!

IMPORTANT SAFETY INSTRUCTIONS

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated “Dangerous

voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (Servicing) instructions in the

literature accompanying the product.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON

THIS APPARATUS.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION:

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,

REPLACE THE FUSE ONLY WITH THE SAME AMPERAGE AND VOLTAGE

TYPE. REFER REPLACEMENT TO QUALIFIED SERVICE PERSONNEL.

WARNING:

UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE

VENTILATION TO ALLOW FOR COOLING. DO NOT PLACE NEAR A HEAT

SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry a cloth.

7) Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer or sold with the

apparatus. When a cart is used, use caution when

moving the cart/ apparatus combination, to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15) DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING

AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, ARE PLACED ON THE APPARATUS.

16) TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC

MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE

AC RECEPTACLE.

17) THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN

READILY OPERABLE.

Owners Manual

MAN0043

www.paradigm.com

Paradigm Electronics reserves the right to change specifications and/or features

without notice as design improvements are incorporated.

Paradigm Electronics Inc.

In the U.S.: MPO Box 2410, Niagara Falls, NY 14302

In Canada/International: 205 Annagem Blvd., Mississauga, ON L5T 2V1

Designed and engineered in North America. Made in China.

Paradigm®PT-2 is warranted to be and remain free of manufacturing and/or

material defects for a period of three (3) years from the date of the original retail

purchase. Within this specified period, repair, replacement or adjustment of parts

for manufacturing and/or material defects will be free of charge.

Thermal or mechanical abuse/misuse is not covered under warranty.

Limitations:

• Warranty begins on date of original retail purchase from an Authorized

Paradigm®Dealer only. It is not transferable;

• Warranty applies to product in normal home use only. If the product is

subjected to any of the conditions outlined in the next section, warranty is void;

• Warranty does not apply if the product is used in professional or commercial

applications.

Warranty is Void if:

• The product has been abused (intentionally or accidentally);

• The product has been used in conjunction with unsuitable or faulty equipment;

• The product has been subjected to damaging signals, derangement in

transport, mechanical damage or any abnormal conditions;

• The product (including cabinet) has been tampered with or damaged by an

unauthorized service facility;

• The serial number has been removed or defaced.

What You Are Responsible For:

• Provide normal/reasonable operating care and maintenance;

• Provide or pay for transportation charges for product to service facility;

• Provide proof of purchase (your sales receipt given at time of purchase from

your Authorized Paradigm®Dealer).

Should servicing be required, contact your nearest Authorized Paradigm ®

Reference Dealer, Paradigm Electronics Inc., or Import Distributor (outside the

U.S. and Canada) to arrange, bring in or ship prepaid any defective unit. Visit our

website at www.paradigm.com for more information.

Paradigm Electronics Inc. reserves the right to improve the design of any product

without assuming any obligation to modify any product previously man ufactured.

This warranty is in lieu of all other warranties expressed or implied, of

merchantability, fitness for any particular purpose and may not be extended or

enlarged by anyone. In no event shall Paradigm Electronics Inc., their agents, or

representatives be responsible for any incidental or consequential damages.

Some jurisdictions do not allow limitation of incidental or consequential damages,

so this exclusion may not apply to you.

Retain this manual and your sales receipt for proof of warranty term and proof

of purchase.

WARRANTY

RECYCLING AND REUSE GUIDELINES FOR EUROPE

In accordance with the European Union WEEE (Waste Electrical and Electronic

Equipment) directive effective August 13, 2005, we would like to notify you that

this product may contain regulated materials which, upon disposal, according

to the WEEE directive, require special reuse and recycling processing. For this

reason Paradigm Electronics Inc. (manufacturers of Paradigm speakers and

Anthem electronics) has arranged with our distributors in European Union

member nations to collect and recycle this product at no cost to you. To find

your local distributor please contact the dealer from whom you purchased this

product or go to our website at

www.pa

www.pawww.paradigm.

radigm.

radigm.radigm.com

com

comcom.

Please note that the product only falls under the WEEE directive. When

disposing of packaging and other shipping material we encourage you to

recycle through the normal channels.

This device contains FCC ID: YZY-HT205 and IC ID: 9261A-HT205. This device

complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including interference that

may cause undesired operation.

ABOUT YOUR PT-2 TRANSMITTER

PANEL LAYOUTS

WIRELESS SYNC INSTRUCTIONS

LATENCY SWITCH INSTRUCTIONS

- -

LED STATUS

Wireless

Subwoofer

Receiver

Wireless

Subwoofer

Receiver

Wireless

Subwoofer

Paradigm VC-150

Volume Control

SPEAKER-LEVEL CONNECTION,

VOLUME CONTROLLED BY RECEIVER

LINE-LEVEL CONNECTION (NO SUB-OUT/LFE):

VOLUME CONTROLLED BY RECEIVER

SPEAKER-LEVEL CONNECTION:

VOLUME CONTROLLED EXTERNALLY (ZONE 2)

Zone 2 volume level of full-range speakers and subwoofer may be controlled

by the Paradigm VC-150 Volume Control

(sold separately)

.Requires running

speaker wire from the Paradigm VC-150 Volume Control back to the

Paradigm PT-2 transmitter.

1. Plug in PT-2

wireless transmitter.

2. Press and hold sync button on front panel of PT-2 for

seconds. The

LED will blink quickly

3. Wit

hi n 60

secs of pressing the sync butto

n all subwoofers

must be plugged in. Once all s

ubwoofers are synched, the

LED will remain ‘on’.

Off: No power.

Fast blinking: Set-up mode.

Dim: Unit in standby mode, no transmission.

Slow blinking, ‘off’ to bright: Waking from standby mode

and synching.

Slow blinking, dim to bright: At least one subwoofer is synched.

Permanently On: All subwoofers synched and receiving signal.

TIP! Once all subwoo

fers hav

e been synched, if ne

cessary they

can be u

nplugge

d and moved witho

ut resynching again.

The latency switch adjusts the delay between the PT-2’s audio

signal input and the subwoofer receiver’s RF output, optimizing

integrity of the wireless transmission. Start with the switch

in the 15ms position. If you experience sound quality issues

(i.e drop-outs, pops, ticks), you can improve the connection by

moving the switch to 20ms or 25ms to increase latency.

Receiver without line-level connection.

Receiver without bass management.

/Sub-In

Sub-Out

Receiver

Wireless

Subwoofer

LINE-LEVEL CONNECTION (WITH SUB-OUT/LFE):

VOLUME CONTROLLED BY RECEIVER

Receiver with bass management.

lume Con

trol

occurs

receive

In a typical listening room the PT-2 transmitter has a

maximum range of 50’ (15 m). Obstructions such as walls,

large pieces of furniture, room dividers, etc., may reduce this

range. Do not place subwoofer(s) and transmitter farther

apart than the recommended range. The PT-2 is a 2.4 GHz

digital design that automatically adjusts for best wireless

connection while constantly monitoring the integrity of the

data stream. An RCA audio cable is required (not included) to

connect it to your A/V receiver or preamplifier (see dealer).

One PT-2 transmitter can be used with up to four wireless

Paradigm subwoofers. See dealer for full details on connecting

multiple subwoofers.

Zone 2 Operation

Your PT-2 transmitter will work with a subwoofer(s) in a second

zone (i.e. another area of your home).

TIP! To minimize the chance of signal dropouts or signal

interference, keep the PT-2 transmitter out of range of a

microwave oven, mobile telephone or a Bluetooth device

operating on the same frequency.

IMPORTANT! Paradigm recommends using

speaker-level line-level connections.OR DO

NOT USE BOTH CONNECTIONS AT THE

SAME TIME.

Your PT-2 transmitter is designed to work

with Paradigm brand subwoofers only.

All subwoofers must be unplugged from outlets.

Especificaciones del producto

Marca:	Paradigm
Categoría:	sistema de alta fidelidad
Modelo:	PT-2

¿Necesitas ayuda?

Si necesitas ayuda con Paradigm PT-2 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

sistema de alta fidelidad Paradigm Manuales

Paradigm PT-2 Manual de Usario

9 Septiembre 2024

sistema de alta fidelidad Manuales

Últimos sistema de alta fidelidad Manuales

Morel MXT280C Manual de Usario

27 Octubre 2024

Rotel RSP-975 Manual de Usario

27 Octubre 2024

Motu Audio Express Manual de Usario

27 Octubre 2024

Rockford Fosgate HD9813SGU-STAGE2 Manual de Usario

26 Octubre 2024

Thomson MIC123BT Manual de Usario

26 Octubre 2024

Samsung MAX-KC930 Manual de Usario

25 Octubre 2024

Samsung MM-ZL7 Manual de Usario

25 Octubre 2024

Philips FWM996X Manual de Usario

24 Octubre 2024

Sony MHC-RV333D Manual de Usario

21 Octubre 2024

Sony MHC-FR10 Manual de Usario

20 Octubre 2024