PCE Instruments PCE-ALC 30 Manual de Usario

Lee a continuación 📖 el manual en español para PCE Instruments PCE-ALC 30 (7 páginas) en la categoría probador de alcohol. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
PCE-ALC 30
Alcohol Tester
Cautions
To have accurate indication of blood alcohol concentration, please
test at least 15 minutes later after drinking. Make sure to attach a
mouthpiece during testing, otherwise, the result is not accurate.
Not recommend to use it beyond - -1050. The reading may not
be accurate.
To keep accuracy of alcohol tester, its highly recommended to be
recalibrated in every 6 months. Please calibrate the sensor once the
tester is due for recalibration.
Do not block breath sample inlet, otherwise, the sample could be
stay inside of tester, which will impact following tests.
Do not clean surface by Ethanol. Recommend to use soft wet cloth
and neutral detergent.
Do not let smoke into the mouthpiece and tester, which maygo
damage the sensor.
Avoid any fall or strong shock which may damage the tester.
General Information
PCE-ALC 30 is a key chain breathalyzer which is convenient to carry
and use at all times. It adopts fuel cell sensor which provides superb
accuracy
and repeatability; OLED shows results with 3 decimals; Preset alarm
threshold; Low voltage indication, etc.
Specification
Model
PCE-ALC 30
Sensor
Fuel Cell
Test Range
0 2.00mg/L
0 0.40%BAC
0 4.00g/L
0 440mg/100mL
Resolution
0.001%BAC
Accuracy
±0.010%BAC at 0.050%BAC
Warm Up Time
Less than 5s
Operation Condition
Temperature -: 1050
Humidity: ≤95%
Display
OLED
Battery
1×1.5V AAA
Dimension
66mm×47mm×19mm
Weight
35g
Automatically power
off time
Testing mode: 30s
Menu mode: 600s

Especificaciones del producto

Marca: PCE Instruments
Categoría: probador de alcohol
Modelo: PCE-ALC 30

¿Necesitas ayuda?

Si necesitas ayuda con PCE Instruments PCE-ALC 30 haz una pregunta a continuación y otros usuarios te responderán