Perfect Aire 1PAFD6 Manual de Usario

Lee a continuación 📖 el manual en español para Perfect Aire 1PAFD6 (4 páginas) en la categoría Ventilador. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
MODEL 1PAFD6
OWNERS MANUAL
6" 2-IN-1 CLIP-ON
OR TABLE FAN
2
ASSEMBLY / OPERATION
FAN ASSEMBLY
A. To convert the clip fan into a desk fan:
1. Disassemble the clip by loosening
the buttery head screw.
2. Attach plastic base to the fan head,
match locking tab to base, click into
position.
3. Tighten the buttery head screw
to secure.
B. To convert from the desk fan to a clip fan:
1. Detach buttery head screw
from base of the fan.
2. Remove base and attach clip to
the fan head.
3. Tighten the screw into the clip base
to secure the fan to the clip.
ASSEMBLY INSTRUCTIONS
Attach the motor assembly to the angle adjusting joint with the buttery head screw and nut.
OPERATING INSTRUCTIONS
1. Fan speed is controlled by the rotary switch: 1 (Low) - 0 (O) - 2 (High), the air ow can be
adjusted upward or downward by loosening the angle adjusting joint. Re-tighten knob securely.
2. The direction of air ow can be adjusted by turning the rotary joint.
3. Plug the power supply cord into a wall outlet.
CAUTION Read Rules for Safe Operation and Instructions Carefully.
WARNING
To reduce the risk of re or electric shock, do not use this fan with any solid-state control device.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to t in a polarized outlet only one way. If plug does
not t, contact a qualies electrician. Do not tamper with this safety feature.
Do not leave the fan running unattended.
READ AND SAVE THESE INSTRUCTIONS
3
SERVICING / CLIPPING
USER SERVICING INSTRUCTIONS
1. Grasp plug and remove from the outlet. Do not unplug by pulling on the cord.
2. Open fuse cover. Slide the fuse cover located on top of the attachment plug towards blades.
3. Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to
remove fuse.
4. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide the fuse cover located on top of the
attachment plug away from the blades.
6. Risk of Fire. Do not replace attachment plug. Contains safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
Notice: When you replace the fuse, please don’t operate suddenly or overexert,
or else the product will be damaged or cause an accident.
If you feel it’s hard to replace the fuse, please make sure you have it inserted the right way.
2.
1.
CLIPPING INSTRUCTIONS
1. Place the clip onto a secure structure.
The clip can accommodate a 1.06”
to 1.65” thick structure.
2. Fig. 2 illustrates the wrong way to
clip to a structure and the wrong kind
of structures to clip. Clip as shown to
reduce the risk of damage.
CLEANING
Be sure to unplug from the electrical
supply source before cleaning.
Plastic parts should be cleaned with
mild soap and damp cloth or sponge.
Be sure not to get water or other liquid
into the motor housing.

Especificaciones del producto

Marca: Perfect Aire
Categoría: Ventilador
Modelo: 1PAFD6

¿Necesitas ayuda?

Si necesitas ayuda con Perfect Aire 1PAFD6 haz una pregunta a continuación y otros usuarios te responderán




Ventilador Perfect Aire Manuales

Ventilador Manuales

Últimos Ventilador Manuales