Philips HTL2060 Manual de Usario

Philips Barra de sonido HTL2060

Lee a continuación 📖 el manual en español para Philips HTL2060 (1 páginas) en la categoría Barra de sonido. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/1
RESET MUT E
EQ
VOL+
VOL-
AUD USB
BT ARC OPT
10987 11
总尺寸：660x173mm
工艺：风琴折 铜版纸 双面印刷 105G
成品尺寸：110x86.5mm
料号：30709L003102-003
成品正面： 成品背面：
SOUNDBAR
HTL2060
User ma alnu
SOUNDBAR
H TL 2060
User manual
System po tiosi ning :
The subwoofer is recommended to be put
Helpful Hint:
- To avoid magnetic interference, do not position
the speakers, too close to your TV.
Playing the speakers and subwoofer
Audio source / player
SOUNDBAR
The soundbar is recommended to be put on
the at desktop to get a better acoustic eect.
Warranty
1. Proof of purchase s ot omp ied with this warranty rd. i n acc an ca
2. The warranty card is not completed immediately after purchase.
3. The apparatus is not used according to this user manual.
4. Defects re used due to proper or reckless use. a ca im
5. Any repairs are done by persons other than Philips authorized service centre.
6. The serial number is tampered with.
7. Defects due to uses beyond ca control like light g, bnormal oltage or while tr sit to the nin a v in an
purchaser’s residence.
Product Sl. No.Model No.
Invoice Number Date of Purchase: / /
Customer’s Name and address:
PIN:
Always there to help you!
Visit us at www.support.philips.com
Helpline: 1800 425 6396
Email: india.callcentre@tpv-tech.com
(10 a.m. to 9 p.m. Mondays to Saturdays & 10
a.m. to 6 p.m. on Sundays)
Deal r e Name & Stamp:
This Philips soundbar is warranted against any defect due to defective materials or workmanship for 12 months
from the date of purchase, should a defect develop during the warranty, TPV Technology India Pvt. Ltd.,
its authorized service center in India.
FREE OF CHARGE at any of
General information
Safety instructions
Plea r carefully t safety mark on back sidese ead he the
This mark is intended to alert the user from
the non isolated dangerous voltage within the
constitute a risk of electric shock to persons.
This mark is intented to alert the user for
important operating and servicing instruction.
Warnings
•
Avoid sustained periods on high-volume use, and
do not turn the volume to maximum level while using
high output signal, such as Mobile Phone or DVD,
etc., as this will cause distortion and may damage the
loudspeaker cones.
•
when not in use.
• Do not open the cover or back panel to avoid
electrical shock or any other accidents. No user-
serviceable parts are inside.
• Only for indoor use.
• Plug the system to the AC outlet with the right voltage
marked on the back panel of the Subwoofer and soundbar.
•The MAINS plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Accessories
The product shall not be exposed to dripping or splashing
be placed on the product.
•
Connections
Soundbar back panel
Top panel operation Remote controls
* AVAILABLE IF CONNECTED* AVAILABLE IF CONNECTED
Bluetooth Operating Instruction
1. R m Press SOU CE key fro soundbar or re ote m c ontrol to Bluetooth mode ;
2. Bluetooth When selecting m anode, BT light will start blinking and you will hear aud Bluetooth i no to e which
pairing mode.
3. obile mFor pairing with phone or other Bluetooth dev rchi aces, se the dev med “Phice na ilips ” HTL2060 and
choose to pair. Once paired, the BT light will slowly ash and come up with another audio tone. BT light will
stop ash when playing music.
4. n Press a d hold “ con n ” for 3 se ds from remote control i order to force dis nect thecon
. Bluetooth connection
Note: While using Bluetooth, if external call comes, then speaker s ystem goes in m ute mode in
order cy m ato protect priva of obile phone user. Oper tion ce resumes on the all dis c is con ected.n
Troubleshooting
Problem Solution
1. No power.
2. No sound or distorted sound.
3. The remote control does not
function properly.
4. Low hum or buzz sound.
drive cannot be read.
6. Slow operation of the USB
Check if the AC power cord is properly inserted into the AC mains socket.
Adjust the volume / select the correct source to choose the equipment
that you want to hear through the system.
Reduce the distance between the remote control and the system. Replace
the batteries with new ones / Point the remote control directly towards the
IR sensor (located on front panel of the subwoofer) / Check that the batteries
Place the product as far away as possible from electrical devices that may be
causing interference / Check power supply voltage and consult electrician.
Drive is
7. BT not working. Reduce the distance or device is not paired.
Warning -
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty.
below before taking the system for repair. If you are unable to remedy the problem by following hints
mentioned in below table.
and play. / Take out USB drive and insert it again properly.
1. 2. RESET 3. MUTE 4. VOL+ 5. 6. 7.
8. VOL- 9. BT 10. ARC 11. OPT 12. AUD 13. USB 14. EQ
1. : Power ON or Standby mode.
2.RESET: To set the EQ and volume to default level.
3. MUTE: Turn volume o, short press again to activate the sound.
4. VOL+: To increase the Volume by short or long press VOL+.
5. : Play the previous song by pressing “ ” but not in audio mode.
6. : Play/ pause in USB*/BT mode and MUTE in audio mode.
7. : Play next song by pressing “ ”, but not in audio mode.
8. VOL-: To decrease the Volume by short or long press VOL-.
9. BT: Bluetooth mode.
10. ARC: HDMI ARC mode.
11. OPT: Optical mode.
12. AUD: Audio input mode.
13. USB: USB* mode.
14. EQ: POP, ROCK, JAZZ, CLASSIC, COUNTRY, NORMAL.
(1)
(2)
(8)
(4)
(5)
(9)
(14)
(12)
(3)
(7)
(10)
(11)
(13)
(6)
1. Bass connection.
2. Input Connect to sound sources such as computer, CD player, MP3, etc.
3. Headphone output.
4. Optical Input.
5. HDMI ARC Input.
(1)
(2)
(3)
(4)
(5)
1. /SOURCE
2.
3. /VOL-
4. /VOL+
5.
1. /SOURCE: The Speaker system is in stand by mode when power on,
with LED lights on. Please press the “ /SOURCE” to select
appropriate source. Keeping the “ /SOURCE” key pressed for long
will put it back in stand by mode.
You can toggle through the input modes by pressing the “ /SOURCE”
key. “BT” denotes Bluetooth Mode, “ARC” denotes HDMI ARC Mode,
“OPT” denotes Optical Mode, “ AUDIO IN ” denotes Audio Mode,
“ ” denotes USB* mode.
2. : Play/Pause the songs.
3. /VOL-: Long press for volume decrease/ short press for prev track.
4. /VOL+: Long press for volume increase/ short press for next track.
5. : USB* Slot.
Item Remote control User manual
Quantity 1
Audio-2RCA cable
1 1 1
Optical cable
1
Connection cable
Total system power 60W RMS
Soundbar power 15 x2W RMS
Subwoofer power 30W RMS
Separation
SNR
Audio input socket Audio-2RCA cable
Power consumption 12.7 W
Subwoofer 1 Way
Speaker size 5.25 inches
Impedance 4 Ohm
Frequency range 60Hz - 150Hz
Dimension (mm) W x H x D 120 x 380 x 260
Weight kg2.88
Soundbar
Speaker size
Impedance
Frequency range
Product D ensio m W Dim n ( m) x H x
Net Weight
BT versio V5. n 0
437x 88 x 62
2 Way
2.25 inches * 2
8 Ohm
140Hz - 20KHz
1.20 kg
BT range
USB max capacity
playability
Up to 32GB
Up to 10 meters
MP3 track
>55db
>40db
*** Do NOT use USB for char ging devices which can caus e damage to
you exter nal devicer s.thank you.
U S B
(4)
(3)
(1)
(2)
(5)
/S OURC E
/VOL+
/VOL-
Care and safety information
Avo gh t eratur , mo ture, water and id hi emp es is dust
• Apparatus should not be exposed to dripping or
splashing of liquid.
• Do not place any source of danger on the Subwoofer,
• Do not install near heat sources.
Do not block any ventilation opening
• Place the apparatus in a location with adequate
ventilation to prevent internal heat build up. Allow at
least 10cm (4 inches) of free space all around the
apparatus for adequate ventilation.
• At high volume the back cover of Subwoofer becomes
hot. Do not touch it.
Care of the cabinet
• Use a soft cloth slightly moistened to clean the cabinet.
Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
• Attentio should be draw to the environmental n n
aspects of batter disposal.y
• Batteries shall not be exposed to e essive heat such s xc a
Remark:
In order not to disturb in the dark, the LED display of soundbar is set to be o,
if there is no operation after 90 seconds of stand by mode.
Remark:
In order not to disturb in the dark, the LED display of soundbar is set to be o,
if there is no operation after 90 seconds of stand by mode.
AUDIO IN
BASS
OPT
ARC

Especificaciones del producto

Marca: Philips
Categoría: Barra de sonido
Modelo: HTL2060

¿Necesitas ayuda?

Si necesitas ayuda con Philips HTL2060 haz una pregunta a continuación y otros usuarios te responderán


Barra de sonido Philips Manuales

Philips

Philips TAB5309 Manual de Usario

15 Septiembre 2024
Philips

Philips TAB5109 Manual de Usario

14 Septiembre 2024
Philips

Philips HTL7140B Manual de Usario

14 Septiembre 2024
Philips

Philips HTL2060 Manual de Usario

13 Septiembre 2024
Philips

Philips HTL8121 Manual de Usario

13 Septiembre 2024
Philips

Philips TAB7007 Manual de Usario

13 Septiembre 2024
Philips

Philips HTL8120 Manual de Usario

13 Septiembre 2024
Philips

Philips HTL4080 Manual de Usario

13 Septiembre 2024
Philips

Philips HTL1042 Manual de Usario

12 Septiembre 2024
Philips

Philips HTL1045 Manual de Usario

12 Septiembre 2024

Barra de sonido Manuales

Últimos Barra de sonido Manuales

Canton

Canton DM 60 Manual de Usario

27 Octubre 2024
Canton

Canton Musicbox M Manual de Usario

27 Octubre 2024
Sven

Sven SB-2055 Manual de Usario

25 Octubre 2024
LG

LG SQM1 Manual de Usario

23 Octubre 2024
LG

LG SPT8-S Manual de Usario

23 Octubre 2024
LG

LG S90TY Manual de Usario

20 Octubre 2024
LG

LG S40TR Manual de Usario

20 Octubre 2024
Muse

Muse M 1800 SBT Manual de Usario

18 Octubre 2024
Yamaha

Yamaha YSP-2700BL Manual de Usario

17 Octubre 2024
Onkyo

Onkyo SBT-A500 Manual de Usario

15 Octubre 2024