Pioneer AVIC-Z830DAB Manual de Usario

Pioneer navegador AVIC-Z830DAB

Lee a continuación 📖 el manual en español para Pioneer AVIC-Z830DAB (76 páginas) en la categoría navegador. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/76
English Français Italiano Español Deutsch Nederlands
AVIC-Z930DAB
AVIC-Z830DAB
AVIC-Z730DAB
AVIC-Z630BT
AVIC-Z7330DAB
AVIC-Z6330BT
NAVIGATION AV SYSTEM
SYSTÈME DE NAVIGATION AV
SISTEMA DI NAVIGAZIONE AV
SISTEMA DE NAVEGACIÓN AV
NAVIGATIONS-/AV-SYSTEM
AV NAVIGATIESYSTEEM Installation Manual
Manuel d'installation
Manuale d'installazione
Manual de instalación
Installationsanleitung
Installatiehandleiding
2En
•The navigation features of this product
(and the rear view camera option if
purchased) are intended solely to aid you
in the operation of your vehicle. It is not a
substitute for your attentiveness,
judgement and care when driving.
•Never use this product to route to
hospitals, police stations, or similar
facilities in an emergency. Please call the
appropriate emergency number.
•Do not operate this product, any
applications, or the rear view camera
option (if purchased) if doing so will
divert your attention in any way from the
safe operation of your vehicle. Always
observe safe driving rules and follow all
existing traffic regulations. If you
experience difficulty in operating this
product, pull over, park your vehicle in a
safe location and apply the handbrake
before making the necessary
adjustments.
•This manual explains how to install this
product in your vehicle. Operation of this
product is explained in the separate
manuals.
•Do not install this product where it may
(i) obstruct the driver’s vision,
(ii) impair the performance of any of the
vehicle’s operating systems of safety
features, including airbags, hazard lamp
buttons, or
(iii) impair the driver’s ability to safely
operate the vehicle.
In some cases, it may not be possible to
install this product because of the vehicle
type or the shape of the vehicle interior.
•Model icons shown in this manual
indicate that the description is intended
for the models indicated by the icons. If
the following icon is shown, the
description is applied only to the model
shown.
e.g.)
WARNING
Pioneer does not recommend that you
install this product yourself. This product is
designed for professional installation only.
We recommend that only authorised
Pioneer service personnel, who have
special training and experience in mobile
electronics, set up and install this product.
NEVER SERVICE THIS PRODUCT YOURSELF.
Installing or servicing this product and its
connecting cables may expose you to the
risk of electric shock or other hazards, and
can cause damage to this product that is
not covered by warranty.
•Read this manual fully and carefully
before installing this product.
•Keep this manual handy for future
reference.
•Pay close attention to all warnings in this
manual and follow the instructions
carefully.
•This product may in certain
circumstances display inaccurate position
of your vehicle, the distance of objects
shown on the screen, and compass
directions. In addition, the system has
Connection
Precautions
Yo u r n e w p ro d uc t an d th i s
manual
Important safeguards
Z000DAB
certain limitations, including the inability
to identify one-way streets, temporary
traffic restrictions and potentially unsafe
driving areas. Please exercise your own
judgement in the light of actual driving
conditions.
•As with any accessory in your vehicle’s
interior, this product should not divert
your attention from the safe operation of
your vehicle as it may result in serious
injury or death. If you experience
difficulty in operating the system or
reading the display, please make
adjustments while safely parked.
•Please remember to wear your seat belt
at all times while operating your vehicle.
If you are in an accident, your injuries can
be considerably more severe if your seat
belt is not properly fastened.
•Certain country and government laws
may prohibit or restrict the placement
and use of this product in your vehicle.
Please comply with all applicable laws
and regulations regarding the use,
installation and operation of this product.
WARNING
Do not take any steps to tamper with or
disable the handbrake interlock system
which is in place for your protection.
Tampering wit h or disabl ing the
handbrake interlock system could result in
serious injury or death.
CAUTION
•If you decide to perform the installation
yourself, and have special training and
experience in the mobile electronics
installations, please carefully follow all of
the steps in the installation manual.
•Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
•Do not directly connect the yellow lead of
this product to the vehicle battery. If the
lead is directly connected to the battery,
engine vibration may eventually cause
the insulation to fail at the point where
the wire passes from the passenger
compartment into the engine
compartment. If the yellow lead’s
insulation tears as a result of contact with
metal parts, short-circuiting can occur,
resulting in considerable danger.
•It is extremely dangerous to allow cables
to become wound around the steering
column or gearstick. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or
hinder driving.
•Make sure that the cables and wires will
not interfere with or become caught in
any of the vehicle’s moving parts,
especially the steering wheel, gearstick,
handbrake, sliding seat tracks, doors, or
any of the vehicle’s controls.
•Do not route wires where they will be
exposed to high temperatures. If the
insulation heats up, wires may become
damaged, resulting in a short circuit or
malfunction and permanent damage to
the product.
•Do not cut the GPS aerial cable to shorten
it or use an extension to make it longer.
Altering the aerial cable could result in a
short circuit or malfunction.
•Do not shorten any leads. If you do, the
protection circuit (fuse holder, fuse
resistor or filter, etc.) may fail to work
properly.
•Never feed power to other electronic
products by cutting the insulation of the
power supply lead of this product and
tapping into the lead. The current
capacity of the lead will be exceeded,
causing overheating.
Precautions before
connecting the system
3En
English
•Use this unit with a 12-volt battery and
negative earthing only. Failure to do so
may result in a fire or malfunction.
•To avoid shor ts in the ele ctrical system,
be sure to disconnect the (–) battery
cable before installation.
WARNING
•Use speakers over 50 W (maximum input
power) and between 4 to 8 Ω Ω
(impedance value). Do not use 1 to 3 Ω Ω
speakers for this product.
•The black lead is earth. Please earth this
lead separately from the earth of high
current products such as power amps. Do
not earth more than one product
together with the earth from another
product. For example, you must
separately earth any amp unit away from
the earth of this product. Connecting
earths together can cause a fire and/or
damage the products if their earths
became detached.
•When replacing the fuse, be sure to only
use a fuse of the rating prescribed on this
product.
•When disconnecting a connector, pull the
connector itself. Do not pull the lead, as
you may pull it out of the connector.
•This product cannot be installed in a
vehicle without ACC (accessory) position
on the ignition switch.
•To avoi d sh ort-circuiting, cover the
disconnected lead with insulating tape. It
is especially important to insulate all
unused speaker leads, which if left
uncovered may cause a short circuit.
•Attach the connectors of the same colour
to the corresponding coloured port, i.e.,
blue connector to the blue port, black to
black, etc.
•For connecting a power amp or other
devices to this product, refer to the
manual for the product to be connected.
•Since a unique BPTL circuit is employed,
do not directly earth the side of the
speaker lead or connect the side of
another side of the speaker lead together.
Be sure to connect the side of the
speaker lead to the side of the speaker
lead on this product.
•The graphical symbol placed on
the product means direct current.
•When the ignition switch is turned on
(ACC ON), a control signal is output
through the blue/white lead. Connect to
an external power amp’s system remote
control terminal, the auto-aerial relay
control terminal, or the aerial booster
power control terminal (max. 300 mA 12
V DC). The control signal is output
Before installing this
product
To prevent damage
Notice for the blue/
white lead
ACC position No ACC position
through the blue/white lead, even if the
audio source is switched off.
•Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.
•Be sure not to use this lead as the power
supply lead for the auto-aerial or aerial
booster. Such connection could cause
excessive current drain and malfunction.
Important
When this product is in [Power OFF] mode,
the control signal is also turned off. If
[Power OFF] mode is cancelled, the control
signal is output again and the aerial is
extended with the auto aerial function (if
the aerial is being used). Be careful so that
the extended aerial does not come into
contact with any obstacles.
WARNING
•To avoi d the risk of acc ident and the
potential violation of applicable laws, this
product should never be used while the
vehicle is being driven except for
navigation purposes. And, also rear
displays should not be in a location
where it is a visible distraction to the
driver.
•In some countries, the viewing of images
on a display inside a vehicle even by
persons other than the driver may be
illegal. Where such regulations apply they
must be obeyed and this product’s video
source should not be used.
GPS aerial 3.55 m
Microphone 3 m
Vehicle Bus conversion cable 13 cm*.
Refer to the instruction manual for the
Vehicle Bus adapter (sold separately).
Digital Radio aerial input*
This product
Aerial jack
AV cable IN/OUT
Power supply
Fuse (10 A)
Wired remote input
Hard-wired remote control adapter can
be connected (sold separately).
* AVIC-Z930DAB/AVIC-Z830DAB/AVIC-
Z730DAB/AVIC-Z7330DAB
CAUTION
For improved Digital Radio reception,
make sure a Digital Radio aerial with
phantom power input (active type) is used.
Pioneer recommends using AN-DAB1 or
CA-AN-DAB.001 (sold separately). Current
consumption of the Digital Radio aerial
should be 100 mA or less.
WARNING
IMPROPER CONNECTION MAY RESULT IN
SERIOUS DAMAGE OR INJURY
Rear panel (main
terminals)
Power cord

Especificaciones del producto

Marca: Pioneer
Categoría: navegador
Modelo: AVIC-Z830DAB

¿Necesitas ayuda?

Si necesitas ayuda con Pioneer AVIC-Z830DAB haz una pregunta a continuación y otros usuarios te responderán


navegador Pioneer Manuales

Pioneer

Pioneer NavGate Head-Up SPX-HUD01 Manual de Usario

9 Octubre 2024
Pioneer

Pioneer AVIC-Z830DAB Manual de Usario

15 Agosto 2024

navegador Manuales

Últimos navegador Manuales

Mio

Mio Moov Spirit Flat Manual de Usario

19 Octubre 2024
TomTom

TomTom VIA 1510 Manual de Usario

14 Octubre 2024
Sanyo

Sanyo NVM-4030 Manual de Usario

14 Octubre 2024
TomTom

TomTom GO 950 Manual de Usario

14 Octubre 2024
Garmin

Garmin GPSMAP 86s Manual de Usario

12 Octubre 2024
TomTom

TomTom Start 52 Manual de Usario

12 Octubre 2024
TomTom

TomTom GO 7000 Manual de Usario

12 Octubre 2024
TomTom

TomTom Go Manual de Usario

10 Octubre 2024
TomTom

TomTom Toyota TNS400 Manual de Usario

9 Octubre 2024
TomTom

TomTom Start 20 Manual de Usario

8 Octubre 2024