Pioneer VREC-200CH Manual de Usario

Pioneer Dashcam VREC-200CH

Lee a continuación 📖 el manual en español para Pioneer VREC-200CH (2 páginas) en la categoría Dashcam. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
VREC-200CH Battery Replacement
1. Using a Phillips screwdriver, remove the screws in the screw holes
2. Use a sharp but low hardness disassembly blade and disassemble the product along the
frame gap shown in the picture above
3. In order to prevent the glass lens and screen from being damaged during the battery
removal process, remove the glass lens and screen first;
2
2
2
22
3
3
3
33
4. Find the location of the battery show in the picture above, use a constant temperature
soldering iron, and remove the battery;
5. The process of removing the battery: first remove the black wire with a constant
temperature soldering iron, then remove the red wire, and finally remove the battery.
6. The above is the entire process of battery removal. The installation steps after battery
replacement are the same as the removal steps, but the order needs to be reversed.
Contact Information
Pioneer Customer Support Center
http://www.pioneer. eu
------------------------------------------------------------
Copyright(c) 20 Pioneer Corporation 21

Especificaciones del producto

Marca: Pioneer
Categoría: Dashcam
Modelo: VREC-200CH

¿Necesitas ayuda?

Si necesitas ayuda con Pioneer VREC-200CH haz una pregunta a continuación y otros usuarios te responderán




Dashcam Pioneer Manuales

Dashcam Manuales

Últimos Dashcam Manuales