Planet IPOE-270-12V Manual de Usario

Planet Tarjeta/adaptador de red IPOE-270-12V

Lee a continuación 📖 el manual en español para Planet IPOE-270-12V (2 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET Industrial 2-port Multi-Gigabit
802.3bt PoE++ Injector Hub, IPOE-270/IPOE-270-12V. In the
following sections, the term “Industrial PoE++ Injector Hub”
means the IPOE-270 or IPOE-270-12V.
Open the box of the Industrial PoE++ Injector Hub and carefully
unpack it. The box should contain the following items:
Industrial PoE++ Injector Hub x 1 User’s Manual x 1
DIN-rail Kit x 1 RJ45 Dust Caps x 4 Wall-mount Kit x 1
If any of these are missing or damaged, please contact your dealer
immediately.
Power
Consumption
(Ethernet Full
Loading)
52V DC:
1.5watts/5.1BTU
54V DC:
1.6watts/5.4BTU
56V DC:
1.6watts/5.4BTU
Full loading with PoE
48V DC (120W PoE
Budget):
128watts/436BTU
52V DC (180W PoE
Budget):
177watts/603BTU
54V DC (180W PoE
Budget):
187watts/638BTU
56V DC (180W
PoE Budget):
185watts/631BTU
54V DC: 2.1watts/7.1BTU
56V DC: 2.2watts/7.5BTU
Full loading with PoE
12V DC (60W PoE Budget):
60watts/204BTU
24V DC (120W PoE Budget):
124watts/423BTU
48V DC (120W PoE Budget):
120watts/409BTU
52V DC (180W PoE Budget):
188watts/641BTU
54V DC (180W PoE Budget):
188watts/641BTU
56V DC (180W PoE Budget):
184watts/627BTU
Dimensions 41 x 70 x 115 mm (W x D x H)
Weight 284g 387g
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount kit
ESD Protection 6KV
Surge Protection 6KV
Power over Ethernet
PoE Standard
IEEE 802.3bt Power over Ethernet Plus Plus, 4-pair
PSE
Compatible with IEEE 802.3at PoE+ PSE
3.2 Device Upper Panel
The upper panels of the Industrial PoE++ Injector Hubs consist of
one terminal block connector within two power inputs.
1 2 3 4
V1+ V2+
PWR1 PWR2
DC Input:
48-56V
, 4A max.
V1+
PWR1
V2+ V2
PWR2
DC Input:
12-56V
, 6A max.
1 2 3 4
Figure 3: IPOE-270 Top View IPOE-270-12V Top ViewFigure 4:
3.3 Wiring the Power Inputs
The terminal block connector on the top panel of Industrial PoE++
Injector Hub is used for two DC redundant power inputs. Please
follow the steps below to insert the power wire.
Caution
When performing any of the procedures like inserting
the wires or tightening the wire-clamp screws, make
sure the power is OFF to prevent from getting an
electric shock.
1. Insert positive and negative DC power wires into contacts 1 and
2 for POWER 1, or contacts 3 and 4 for POWER 2.
1 2 3 4
V1+ V2+
PWR1 PWR2
DC Input:
48-56V
, 4A max.
V1+
PWR1
V2+ V2
PWR2
DC Input:
12-56V
, 6A max.
1 2 3 4
3. Hardware Introduction
3.1 Device Front Panel
The front panels of the Industrial PoE++ Injector Hubs consist of
Ethernet interfaces and LED indicators.
Front View
P1 P2
60W 120W 180W
PoE
Usage
PoE++
Ethernet
PoE++
Ethernet
P1 P2
60W 120W 180W
PoE
Usage
PoE++
Ethernet
PoE++
Ethernet
Data port 1
PoE port 1
Data port 2
PoE port 2
Figure 1: Figure 2:
IPOE-270 Front View IPOE-270-12V Front View
2.ProductSpecications
Model IPOE-270 IPOE-270-12V
Hardware Specications
Copper Ports
2-pair 10/100/1G/2.5G/5GBASE-T RJ45:
Data input port 1 and PoE output port 1
Data input port 2 and PoE output port 2
Connector Removable 4-pin terminal block
Pins 1 and 2 for Power 1; Pins 3 and 4 for Power 2
LED Indicator
System: Power 1 (Green) Power 2 (Green)
PoE Usage: 60W/120W/180W (Amber)
802.3bt PoE++ Port: PoE-in-use x 1 (Green:bt,
Amber:at)
Network Cable
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
2.5G/5GBASE-T: 4-pair UTP Cat.6, 6A,7
Data Rate 10/100/1000/2500/5000Mbps
Power
Requirements
48~56V DC,
redundant power
with reverse polarity
protection.
12~56V DC,
redundant power with
reverse polarity protection.
Power
Consumption
(Ethernet Full
Loading)
System ON without
loading
48V DC:
1.4watts/4.7BTU
System ON without
loading
12V DC: 1.8watts/6.1BTU
24V DC: 2.4watts/8.1BTU
48V DC: 2.4watts/8.1BTU
52V DC: 2.6watts/8.8BTU
PoE Power
Supply Type End-span + Mid-span
Power Pin
Assignment
End-span: 1/2 (-), 3/6 (+); Mid-span: 4/5 (+), 7/8
(-)
PoE Power
Budget (max.)
120W@48V DC input
180W@52V/54V/56V
DC input
60W@12V DC input
120W@24V/48V DC input
180W@52V/54V/56V DC
input
Number of
devices that can
be powered
2
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
System LEDs
LED Color Function
P1 Green Lights to indicate DC power input 1 has
power.
P2 Green Lights to indicate DC power input 2 has
power.
PoE Usage Amber
60W, 120W, 180W
Lights to indicate the system consumes over
60-/120-/180-watt PoE power budget.
Blinks to indicate the system consumes less
60-/120-/180-watt PoE power budget.
802.3bt PoE++ TP Interface LEDs
LED Color Function
802.3bt
PoE++
PoE-in-Use
Green
Lights to indicate that the port is providing
802.3bt PoE++ power to remote powered
device.
O or blink to indicate that the port is not
providing PoE power to remote powered
device.
Amber
Lights to indicate that the port is providing
802.3at PoE+ power to remote powered
device.
O or blink to indicate that the port is not
providing PoE power to remote powered
device.
2. Tighten the wire-clamp screws for preventing the wires from
loosening.
1234
Power 1 Power 2
+ - + -
Note
The wire gauge for the terminal block should be in the
range between 12 and 24 AWG.
3.4 Grounding the Device
Users MUST complete grounding wired with the device; otherwise,
a sudden lightning could cause fatal damage to the device.
1 2 3 4
V1+ V2+
PWR1 PWR2
DC Input:
48-56V
, 4A max.
Earth Ground
Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER
WARRANTY.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
4. Installation
This section guides you to installing the Industrial PoE++ Injector
Hub on the DIN rail and wall. Please read this chapter completely
before continuing.
Note
In the installation steps below, this manual uses
PLANET IGS-801 8-port Industrial Gigabit Switch as
an example. The steps for PLANET Industrial Slim-type
Switch, Industrial Media/Serial Converter and Indus-
trial PoE devices are similar.
4.1 DIN-rail Mounting Installation
1
2
4.2 Wall-mount Plate Mounting
5. Three-View Diagram
IPOE-270
115.00
41.00
70.00
18.00
103.00
Top View
Side View Front View Mounting Kit
Mounting Kit
DIN-Rail Kit
Side View Rear View
Unit: mm
Bottom View
P1 P2
60W 12 0W 180 W
PoE
Usage
PoE+ +
Ether net
PoE+ +
Ether net
V1+ V2 +
PWR1 P WR2
DC Input:
48-56V
, 4A max.
Figure 5: IPOE-270 Three-View Diagram
4.3 Side Wall-mount Plate Mounting
Caution
You must use the screws supplied with the wall-
mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate your warranty.
IPOE-270-12V
115.00
41.00
70.00
18.00
103.00
Top View
Side View Front View Mounting Kit
Mounting Kit
DIN-Rail Kit
Side View Rear View
Unit: mm
Bottom View
P1 P2
60W 12 0W 180 W
PoE
Usage
PoE+ +
Ether net
PoE+ +
Ether net
V1+
PWR1
V2+ V2
PWR2
DC Input:
12-56V
, 6A max.
Figure 6: IPOE-270-12V Three-View Diagram
Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource on PLANET web site rst to check if it could
solve your issue. If you need more support information, please
contact PLANET support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
FCC Warning
This device has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
WEEE Warning
To avoid the potential eects on the environment and
human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end
users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do
not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.

Especificaciones del producto

Marca: Planet
Categoría: Tarjeta/adaptador de red
Modelo: IPOE-270-12V

¿Necesitas ayuda?

Si necesitas ayuda con Planet IPOE-270-12V haz una pregunta a continuación y otros usuarios te responderán


Tarjeta/adaptador de red Planet Manuales

Planet

Planet IPOE-270-12V Manual de Usario

23 Agosto 2024
Planet

Planet WNL-U556M Manual de Usario

22 Agosto 2024
Planet

Planet POE-171A-60 Manual de Usario

22 Agosto 2024
Planet

Planet WNL-U554A Manual de Usario

19 Agosto 2024
Planet

Planet HPOE-2400G Manual de Usario

17 Agosto 2024
Planet

Planet WNL-U555HA Manual de Usario

16 Agosto 2024
Planet

Planet POE-152 Manual de Usario

12 Agosto 2024
Planet

Planet IPOE-E174 Manual de Usario

1 Agosto 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks

Cambium Networks CG52A Manual de Usario

26 Octubre 2024
StarTech.com

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024
Devolo

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024
Edimax

Edimax HP-5001K Manual de Usario

16 Octubre 2024
LevelOne

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024
Edimax

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024
ZyXEL

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024
Linksys

Linksys AE1000 Manual de Usario

6 Octubre 2024
Trendnet

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024
Nec

Nec NP06LM Manual de Usario

4 Octubre 2024