Porter-Cable PCE6435 Manual de Usario

Porter-Cable Enrutador PCE6435

Lee a continuación 📖 el manual en español para Porter-Cable PCE6435 (48 páginas) en la categoría Enrutador. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/48
LAMINATE TRIMMER
DÉTOUREUSE À STRATIFIÉS
DESBASTADOR LAMINAR
Part No. N285401 NOV13 Copyright © 2013 PORTER-CABLE
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
Instruction manual
Manuel d'instructions
Manual de'instrucciones
Français : Page 15
Español: Página 29
PCE6430
PCE6435
2 - ENG
TABLE OF CONTENTS
SAFETY GUIDELINES- DEFINITIONS .....................................................................2
GENERAL POWER TOOL SAFETY WARNINGS ....................................................2
ADDITIONAL SPECIFIC SAFETY RULES ................................................................4
COMPONENTS ......................................................................................................7
OPERATION ...........................................................................................................6
MAINTENANCE ....................................................................................................12
SERVICE ..............................................................................................................13
ACCESSORIES ....................................................................................................13
WARRANTY ..........................................................................................................13
FRANÇAIS ............................................................................................................15
ESPAÑOL .............................................................................................................29
SAFETY GUIDELINES - DEFINITIONS
DANGER indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: used without the safety alert symbol indicates potentially haz-
ardous situation which, if not avoided, result in may property damage.
WARNING To reduce the risk of injury, read the instruction manual.
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
3 - ENG
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position
before connecting to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
b) Any Do not use the power tool if the switch does not turn it on and off.
power tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.

Especificaciones del producto

Marca: Porter-Cable
Categoría: Enrutador
Modelo: PCE6435

¿Necesitas ayuda?

Si necesitas ayuda con Porter-Cable PCE6435 haz una pregunta a continuación y otros usuarios te responderán


Enrutador Porter-Cable Manuales

Porter-Cable

Porter-Cable PCE6435 Manual de Usario

7 Agosto 2024
Porter-Cable

Porter-Cable 6902 Manual de Usario

19 Julio 2024

Enrutador Manuales

Últimos Enrutador Manuales

Airlive

Airlive WLA-500AP Manual de Usario

27 Octubre 2024
AVM

AVM FRITZ!Box 6810 LTE International Manual de Usario

27 Octubre 2024
Netgear

Netgear Nighthawk X6 AC3200 Tri-Band Manual de Usario

27 Octubre 2024
Tenda

Tenda TX12 Manual de Usario

26 Octubre 2024
HP

HP FlexNetwork MSR958 Manual de Usario

24 Octubre 2024
Linksys

Linksys WAG120N Manual de Usario

20 Octubre 2024
TP Link

TP Link Archer AX55 Manual de Usario

19 Octubre 2024
D-Link

D-Link DSL-2640B Manual de Usario

19 Octubre 2024
Eminent

Eminent EM4030 Manual de Usario

18 Octubre 2024
Eminent

Eminent EM4551 Pro Manual de Usario

18 Octubre 2024