Power Craft EOS 170 Manual de Usario
Power Craft
lijadora
EOS 170
Lee a continuación 📖 el manual en español para Power Craft EOS 170 (8 páginas) en la categoría lijadora. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
GB
Art.-Nr.: 44.604.05
Operating Instructions
Orbital sander
EOS 170
Anleitung EOS 170 02.11.2001 10:24 Uhr Seite 1
2
Please read these operating instruc-
tions carefully with particular atten-
tion to the safety notes. Always
store these operating instructions
together with the orbital sander.
Technical data
Voltage 230 Volts
Power consumption 135 Watts
Grinding surface area 180 x 85 mm
Sandpaper size 225 x 85 mm
Vibrations per minute 20,000
Shockproof, interference suppressed
Designed in accordance with appli-
cable VDE standards
Included in delivery
EOS 170, orbital sander
Dust extraction connectors ø 32, ø 36,
Operating instructions,
3 sheets of sandpaper
General safety notes
– Always remove the plug from the
power supply socket before carrying
out any maintenance or repair work
such as cleaning the sander or
changing the sandpaper!
– Always disconnect the machine by
removing the plug from the socket,
not by pulling on the mains cable.
– Always wear safety goggles and
dust mask when working.
– Keep the workplace clean and well
illuminated.
– Ensure that the workpiece is suffi-
ciently secured so that you are able
to work safety and effectively.
– Keep children away from the
machine.
– Always keep your machine clean,
and check for possible defects of
damage after every job.
– Always ensure that the switch is
switched off before you insert the
plug into the power supply socket.
– Ensure that any platforms you are
working on are sturdy and stable.
– If the machine is damaged, use the
exploded diagram and the spare
parts list to order any neccessary
parts from Customer Service.
1 Front grip
2 Machine identification
plate
3 On/Off trigger
4 Locking button
5 Main grip
6 Sandpaper
7 Vibration plate
8 Clamping device
9 Vacuum cleaner
attachment
10 Electrical cord
Attaching the dust extraction
connector
Note!
For health reasons, you must use a dust
extraction device.
Warning!
– The orbital sander is not
designed for wet sanding.
– When using a cable reel, make
sure to unroll the cable comple-
tely (wire diameter min. 1 mm
2).
– Disconnect the sander from the
power supply when work has
been completed.
– If the machine is defective, have
it serviced by a qualified dealer
immediately.
On/Off switch
On: Press trigger A.
Continuous Lock trigger A with locking
operation: button B.
Off: Briefly depress trigger A.
GB
Anleitung EOS 170 02.11.2001 10:24 Uhr Seite 2
3
Note!
Always wear safety goggles and a
dust mask.
Always keep the dust extraction holes
in the vibrating plate free of dirt or
other obstructions.
In order to take full advantage of your
vibrating sander, always use original
accessories, available at most hard-
ware shops.
Attaching sandpaper
– Remove the plug from the mains
supply.
– Insert the end of the sandpaper and
close the clamping mechanism.
– Draw the sandpaper tight over the
vibrating plate and clamp the other
end.
– Ensure that the holes match with the
vibrating plate.
Maintenance
– Always keep your orbital sander
clean.
– Do not use caustic cleaning agents
to clean the plastic housing.
– Check the carbon brushes if any
excessive amount of sparks are
generated when working.
– Always keep the dust extraction
holes in the vibrating plate free of
dirt or other obstructions.
– Water must never come into contact
with the machine.
GB
Anleitung EOS 170 02.11.2001 10:24 Uhr Seite 3
Especificaciones del producto
| Marca: | Power Craft |
| Categoría: | lijadora |
| Modelo: | EOS 170 |
¿Necesitas ayuda?
Si necesitas ayuda con Power Craft EOS 170 haz una pregunta a continuación y otros usuarios te responderán
lijadora Power Craft Manuales
9 Septiembre 2024
9 Septiembre 2024
lijadora Manuales
- lijadora Bosch
- lijadora AEG
- lijadora DeWalt
- lijadora Arendo
- lijadora Silverline
- lijadora Ferm
- lijadora Workzone
- lijadora Ozito
- lijadora Makita
- lijadora Hitachi
- lijadora Black And Decker
- lijadora Vonroc
- lijadora Stanley
- lijadora Skil
- lijadora Hyundai
- lijadora Hilti
- lijadora Ryobi
- lijadora Festool
- lijadora Metabo
- lijadora Parkside
- lijadora Worx
- lijadora Meec Tools
- lijadora Milwaukee
- lijadora Hikoki
- lijadora Hazet
- lijadora Einhell
- lijadora Maktec
- lijadora Bort
- lijadora Powerplus
- lijadora Porter-Cable
- lijadora Topcraft
- lijadora Scheppach
- lijadora Gamma
- lijadora Matrix
- lijadora Bavaria
- lijadora Flex
- lijadora Duro
- lijadora Varo
- lijadora Max
- lijadora Truper
- lijadora Kinzo
- lijadora Cocraft
- lijadora Meister Craft
- lijadora RIDGID
- lijadora Rupes
- lijadora Proxxon
- lijadora Elu
- lijadora Global
- lijadora King Craft
- lijadora Rikon
- lijadora Duro Pro
- lijadora Alpha Tools
- lijadora Toledo
- lijadora FIXIT
- lijadora Einhell Bavaria
- lijadora Ergotools Pattfield
- lijadora McKenzie
- lijadora Proviel
- lijadora Bavaria By Einhell
- lijadora THUN
- lijadora Pevec
- lijadora Handwerk
- lijadora TAURUS Titanium
- lijadora Stalco
Últimos lijadora Manuales
27 Octubre 2024
20 Octubre 2024
19 Octubre 2024
14 Octubre 2024
14 Octubre 2024
10 Octubre 2024
8 Octubre 2024
7 Octubre 2024
6 Octubre 2024
5 Octubre 2024