Power Dynamics PDW500MP3 Manual de Usario

Lee a continuación 📖 el manual en español para Power Dynamics PDW500MP3 (20 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
PDW Series Mixer-Amplier
Ref. nr.: 952.086, 952.088
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.0
2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is s tched on for the rst time, wi
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause elect cal shock d malfunction. ri an
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains d and d not damage it. A lea o
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- he plug and/or the mains lea are damaged, they If t d
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid re and sho hazard, not expose the unit to ck do
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will no be used for t a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit o of the reach of children. Do not leave ut
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the cont ls. ro
- This t is with speaker inside which can cause uni
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the pr ct for a long period of odu
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- e unit has fallen, always ha it checked by a If th ve
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use or inal spares for repairs, otherwise serious ig
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- ke sure that the mains lead nnot be damaged when Ma ca
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this u nit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the C certicate and E
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recyc ng centre. Ask your local authorities or your li
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any irs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid repa
your warra y. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings nt
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
rec mendations and warnings. This is also applicable to all damages in whatever form. om
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specied, the light eect can be irrepa bly damaged. The product must also ra
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
elec grtrical ound to avoid the risk of electrocution or re.
REPLACING THE FUSE
If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with tting screwdriver. a
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
FRONT PANEL
1. DISPLAY: The display shows multiple forms of information, for example current MODE, elapsed time, etc.
2. BUTTON CLUSTER:
Mode - Press to change modes between playing SD, USB, MP3, FM and . BT
Previous - Press this button to go to the previous track/station Press and hold to lower the volume level. .
Next - Press this button to go t next track/station. Press and hold to increase the volume level. to he
Repeat - Press the repea butto once to continually repeat ALL tracks, press repeat once more to repeat just the current t n
track.
Play/pause / Store FM- Press this button to start/resume or pause play. Press and hold to automatically scan for FM
stations and store them in FM mode.
3. USB PORT: You can play media les from a USB device by connecting the device to this slot.
4. SD CARD SLOT: Insert an SD card in this slot.
5. MIC1 OUTPUT LEVEL CONTROL: Adjust the volume of the MIC channel. 1
6. MIC2/LINE 3 OUTPUT LEVEL CONTROL: Adjust the volume of the MIC2/LINE3 channel.
7. 1 LINE OUTPUT LEVEL CONTROL: Adjust the volume of the LINE channel. 1
8. LINE2 OUTPUT LEVEL CONTROL: Adjust the volume of the LINE2 channel.
9. MP3 OUTPUT LEVEL CONTROL: Adjust the volume of the MP3 channel.
10. ZONE VOLUME CONTROL: Adjus th volume for zone 1 - 6 separately. t e
11. ECHO CONTROL: Turn to adjust the microphone echo eect.
12. ECHO TIME CONTROL: Turn to adjust the repeat value of the echo eect. Repeats will be increased wh rotating en
clockwise repeats will be reduced when rotating counter-clockwise.,
13. BASS CONTROL: Adjust the low frequencies of the corresponding channel.
14. TREBLE CONTROL: Adjust the high frequencies of the corresponding channel.
15. MASTER VOLUME CONTROL: Turn to adjust the master volume level.
16. STANDBY: Press to put the device in/out of standby.

Especificaciones del producto

Marca: Power Dynamics
Categoría: No categorizado
Modelo: PDW500MP3

¿Necesitas ayuda?

Si necesitas ayuda con Power Dynamics PDW500MP3 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Power Dynamics Manuales

No categorizado Manuales

Últimos No categorizado Manuales