Premier Mounts ECM-4000 Manual de Usario
Premier Mounts
soporte de panel plano
ECM-4000
Lee a continuación 📖 el manual en español para Premier Mounts ECM-4000 (8 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/premier-mounts/ecm-4000/html/bg1.png)
Elliptical Ceiling Mount for 37˝ to 63˝ Flat Panels
Model: ECM-4000
9531-000-000-0X Rev.0
www.mounts.com | North America 800.368.9700 | International +1-714-632-7100
1321 S. State College Blvd., Fullerton, CA 92831 USA
Warranty, Garantie, Garantía, Garanzia, Garantie, Waarborg: http://www.mounts.com/warranty
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
ECM-4000
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/premier-mounts/ecm-4000/html/bg2.png)
AST-2446/2
Lower Half
Upper Half
M8 Pan
Philips
Screw
Allen Wrench
Minimum four (4)
complete turns
Pan Philips
Threaded
Coupler
Mount
Lower Half
Upper Half
The ceiling should be capable of supporting a weight of at least ve times
the product weight. If not, the ceiling surface must be reinforced. Proper
installation procedure by qualied personnel as outlined in the installation
instructions must be adhered to.
Mounting hardware is not included with this product. Commercially
available hardware must be used for this installation. The hardware used
will depend on your installation environment (i.e. wood stud, concrete
surface, metal I-beam etc).
Separate the upper and lower halves of the AST-2446/2 by removing both
M8 screws and wave washers. Unpack the trio mount and place it on the
ground.
The set screw on the threaded coupler must be backed out in order for the
AST-2446/2 to be threaded into place.
Thread the lower half of the AST-2446/2 into the threaded coupler on the
trio mount. The lower half of the AST-2446/2 must be threaded fully until
the piece is safely secured to the threads, then tighten the screw back into
place. Use the screwdriver to tighten the set screw once the AST-2446/2
has been attached.
The following steps must be performed by a minimum of three people:
Two people lift the trio mount into place. Align the upper and lower halves
of the AST-2446/2. Slide the lower half/trio mount into the upper half of the
AST-2446/2.
It is recommended that the height, and location, of the ECM-3000 be
determined prior to performing the following steps.
Determine the mounting height. Align the M8 mounting holes on the upper
and lower halves of the AST-2446/2 and insert the M8 screws and wave
washers. Use the 516˝ wrench to tighten the M8 screws.
Verify that all hardware is secure and tight before proceeding to the next
section.
Mounting
Bracket Arms
Decorative
Covers
Elliptical
Tilt Mount
Quad Mount
Structure side Skirt Thread Depth
Indicator
M6 x 25mm
5
32˝ Allen Wrench
M4 x 16mmM4 x 25mm M5 x 16mm M5 x 25mm
M6 x 30mm M8 x 25mm M8 x 30mm M8 x 70mm
Griplate™
Washers
AST-2446/2
x24
M8 x 16mm
M4 x 30mm M5 x 30mm M6 x 16mm
M6 x 45mm M8 x 45mm
Universal Spacers
x1 x1 x4 x8 x8
x24
x4 x1
x24x24 x24 x24
x24 x24 x24 x24 x32
x1
x24 x24 x24
x98
x24 x24
1
Required for installation
Included components
Max Flat-Panel Capacity: 80 lb. each
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/premier-mounts/ecm-4000/html/bg3.png)
Inverted
Projector
Figure 1
Figure 2 Figure 3
Thread Depth
Indicator
Thread Depth
Indicator
Depth MarkDepth Mark
Thread Depth
Indicator
Threaded
Insert
Marking the
Depth
ScrewScrew
M8
M6
M5
M4
Warranty: http://www.mounts.com/warranty
Garantie, Garantía, Garanzia, Garantie, Waarborg
Updates: The most up-to-date installation
guides can be found at mounts.com
www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 | Europe +44 (0) 24 7664 4105
9531-0 0 0 -000 -0X Rev. 0
2
3
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
ECM-4000
Premier Mounts’ Griplate™ Washers are designed to accom-
modate the various M4, M5, M6 and M8 hole sizes required
by flat panels.
Do not place excessive pressure on the back of the flat
panel, as this may damage your flat panel.
The Griplate™ Washer must be installed between the head
of the mounting screw and the mounting bracket as shown.
Does your flat panel have:
Recessed mount points?
Uneven mount points?
A cur ved back?
Any obstruction near the mount point?
If Yes, you must install nylon spacers. Remove the mount-
ing brackets, Griplate™ washers, and mounting screws from
the back of the flat panel.
Insert the Thread Depth Indicator into the thread inserts
found on the bottom or top of the projector. Use a pencil to
mark the depth of the thread insert on the Thread Depth In-
dicator, as shown. Insert the Thread Depth Indicator into the
remaining thread inserts to compare and verif y their depth.
Locate the correct diameter screw for the thread insert.
If the screw you selected is longer than the mark on the
Thread Depth Indicator, as shown in Figure 2 and Figure 3,
do not use this screw. The screw length must not bypass
the mark.
Select another screw length until you find a screw that
comes closest to the mark without going past the mark.
Test each size of the screws provided.
The correct screws should thread easily into the mount point
and not pull out when tension is applied.
The optional M3 flat washers may be used to decrease the
screw depth of either the M2.5 x 12mm screws or the M3 x
16mm screws. Decrease the screw depth by placing an M3
flat washer inside the leveling barrel and then inser ting the
mounting screw.
Especificaciones del producto
Marca: | Premier Mounts |
Categoría: | soporte de panel plano |
Modelo: | ECM-4000 |
¿Necesitas ayuda?
Si necesitas ayuda con Premier Mounts ECM-4000 haz una pregunta a continuación y otros usuarios te responderán
soporte de panel plano Premier Mounts Manuales
![Premier Mounts](/images/pdf_free.png)
1 Septiembre 2024
![Premier Mounts](/images/pdf_free.png)
1 Septiembre 2024
![Premier Mounts](/images/pdf_free.png)
1 Septiembre 2024
![Premier Mounts](/images/pdf_free.png)
1 Septiembre 2024
![Premier Mounts](/images/pdf_free.png)
31 Agosto 2024
![Premier Mounts](/images/pdf_free.png)
31 Agosto 2024
![Premier Mounts](/images/pdf_free.png)
30 Agosto 2024
![Premier Mounts](/images/pdf_free.png)
30 Agosto 2024
![Premier Mounts](/images/pdf_free.png)
30 Agosto 2024
![Premier Mounts](/images/pdf_free.png)
30 Agosto 2024
soporte de panel plano Manuales
- soporte de panel plano Samsung
- soporte de panel plano HP
- soporte de panel plano Abus
- soporte de panel plano Acco
- soporte de panel plano Icy Box
- soporte de panel plano Hitachi
- soporte de panel plano SilverStone
- soporte de panel plano 3M
- soporte de panel plano GPX
- soporte de panel plano Manhattan
- soporte de panel plano Vision
- soporte de panel plano Kensington
- soporte de panel plano Nec
- soporte de panel plano Techly
- soporte de panel plano BlueBuilt
- soporte de panel plano Da-Lite
- soporte de panel plano Luxor
- soporte de panel plano Steren
- soporte de panel plano Iiyama
- soporte de panel plano Barkan
- soporte de panel plano Digitus
- soporte de panel plano Insignia
- soporte de panel plano Sanus
- soporte de panel plano Peerless-AV
- soporte de panel plano Vogels
- soporte de panel plano Fellowes
- soporte de panel plano Planar
- soporte de panel plano Sven
- soporte de panel plano Konig
- soporte de panel plano Valueline
- soporte de panel plano One For All
- soporte de panel plano Ematic
- soporte de panel plano Newstar
- soporte de panel plano Ewent
- soporte de panel plano BakkerElkhuizen
- soporte de panel plano Ultimate
- soporte de panel plano Wentronic
- soporte de panel plano Peerless
- soporte de panel plano Proaim
- soporte de panel plano Monoprice
- soporte de panel plano Chief
- soporte de panel plano Ergotron
- soporte de panel plano Gabor
- soporte de panel plano Konig & Meyer
- soporte de panel plano Premier
- soporte de panel plano Atdec
- soporte de panel plano StarTech.com
- soporte de panel plano SIIG
- soporte de panel plano Bell'O
- soporte de panel plano B-tech
- soporte de panel plano Speaka
- soporte de panel plano Crimson
- soporte de panel plano Kogan
- soporte de panel plano Panduit
- soporte de panel plano Schwaiger
- soporte de panel plano Cabstone
- soporte de panel plano Elite Screens
- soporte de panel plano V7
- soporte de panel plano Kondator
- soporte de panel plano Bretford
- soporte de panel plano SmartMetals
- soporte de panel plano Unicol
- soporte de panel plano Equip
- soporte de panel plano Zaor
- soporte de panel plano Dataflex
- soporte de panel plano Multibrackets
- soporte de panel plano Anthro
- soporte de panel plano AMX
- soporte de panel plano Rocstor
- soporte de panel plano CTA Digital
- soporte de panel plano Amer
- soporte de panel plano Avteq
- soporte de panel plano Walker Edison
- soporte de panel plano My Wall
- soporte de panel plano Mount-It!
- soporte de panel plano LTN Technologies
- soporte de panel plano Heckler
- soporte de panel plano Helder
Últimos soporte de panel plano Manuales
![Cabstone](/images/pdf_free.png)
27 Octubre 2024
![Nec](/images/pdf_free.png)
15 Octubre 2024
![Insignia](/images/pdf_free.png)
15 Octubre 2024
![Abus](/images/pdf_free.png)
4 Octubre 2024
![Nec](/images/pdf_free.png)
2 Octubre 2024
![One For All](/images/pdf_free.png)
1 Octubre 2024
![One For All](/images/pdf_free.png)
1 Octubre 2024
![One For All](/images/pdf_free.png)
1 Octubre 2024
![Kogan](/images/pdf_free.png)
1 Octubre 2024
![Kogan](/images/pdf_free.png)
1 Octubre 2024