Proaim P-LLBT-150 Manual de Usario

Proaim Trípode P-LLBT-150

Lee a continuación 📖 el manual en español para Proaim P-LLBT-150 (6 páginas) en la categoría Trípode. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
HD 150mm Bowl Baby Camera Tripod Stand w
Lever Fricon and Aluminum Spreader (P LLBT- - -150)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box
HD 150mm Bowl Baby Camera Tripod Stand
with Lever Fricon
Spanner Size: 13mm
Aluminium Spreader
A s s e m b ly Ma n u a l
2
Aluminum Spreader Setup
Extend the Spreader on the oor and loosen
all three knobs.
NOTE: The Spreader aaches to the spiked legs
of the spreader to provide precise customizaon
of the tripod's length and stability.
Aer loosening the knobs, extend the
Spreader per your requirement.
You can lock the posion using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16 to 66cm/26
radius, oering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
3
Loosen all three adjustment knobs to set the
desired height of the Stand.
NOTE: One stage telescopic design with fricon -
knob extends up to 6 inches to capture
low angle shots, and conversely, it can be easily -
extended up to 34 inches for greater elevaon.
Aer seng the height, ghten the knobs to
secure the Stand, as shown in the image.
NOTE: Locking pins on each leg secures the
adjusted height, prevenng them from
retracng under load.
Unlock the red knob to adjust the Tripod s legs
according to your requirement.
Aer adjusng the Tripod legs, re-lock the
knob, as shown in the image.
Mount the Tripod on the aluminum Spreader
by equally aligning them.
Aer mounng the Tripod, properly secure it
using the rubber gripper.
150mm Bowl Baby Camera Tripod Stand Setup

Especificaciones del producto

Marca: Proaim
Categoría: Trípode
Modelo: P-LLBT-150

¿Necesitas ayuda?

Si necesitas ayuda con Proaim P-LLBT-150 haz una pregunta a continuación y otros usuarios te responderán




Trípode Proaim Manuales

Trípode Manuales

Últimos Trípode Manuales