Projecta SPM120K Manual de Usario

Projecta Paneles solares SPM120K

Lee a continuación 📖 el manual en español para Projecta SPM120K (8 páginas) en la categoría Paneles solares. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

WARNING

SOLAR PANEL

• For installations with lead acid batteries, avoid sparks or flames near the batteries and

always use proper eye protection

• Given sufficient light, solar panels always generate energy even when they are disconnected

• Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a

fire hazard

• Do not scratch or bend solar panels

• Do not disassemble the solar panel

• When mounting solar panels at a height adhere to all relevant safety regulations

• Do not walk on modules

• Do not attempt to increase module output by concentrating light on its surface with mirrors

• Be sure to use components (cables, fuses, etc) greater than 25% of solar panel’s maximum

current ratings

• When storing the Solar panel kit do not pack heavy items on top the Solar panel bag

• Do not disassemble the controller. Take to a qualified person if the unit requires repairing

FEATURE OVERVIEW

SOLAR PANEL

Compact and Powerful – Monocrystalline solar panels are manufactured from a solar cell that

is cast from silicon. These cells are more efficient at producing power than amorphous panels,

so the size of the panel is smaller yet produces greater output power

Lightweight, Foldable Design – Folds up into a self contained bag for easy storage

Scratch Resistant – Panels feature a scratch resistant mat coating for durability

5m Lead & Battery Clips – Fused battery lead makes for trouble free battery connection.

Front pocket for easy storage

Heavy Duty Canvas – Tough canvas material suitable for camping and off-road environments

Metal Support Legs – Legs keep the panels at the optimum angle for maximum performance

Collapsible Tent Pole – The pole feeds through the sewn in loops to keep the panel rigid

when set-up

Reinforced Eyelets – Reinforced eyelets allow you to secure the panels using tent pegs, or hang

the panels vertically

12 VOLT

SOLAR PANEL KITS

MONOCRYSTALLINE

P/No. SPM80K, SPM120K

SPECIFICATIONS

SOLAR CONTROLLER

Advanced MCU – Features control pulse width modulated (PWM) technology, high efficiency

operation.

Multi-Chemistry – Target for Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.

4 Stage Charging – Built in regulator to prevent your battery from being overcharged.

Overcharging occurs when the charge voltage is unregulated. This can result in premature

battery failure.

The regulator also prevents your battery from being under charged, in the solar energy field,

battery undercharge always occurs, especially on some Conventional lead – acid or Calcium

batteries; The unit provides an automatic Equalization feature for deeply drained Conventional

lead acid batteries or Calcium batteries, as well as provides a cycling automatic Equalizing

feature every 28 days.

It keeps the battery fully charged by using a process called “floating”. This means the controller

will stop charging when the battery is full and will automatically start charging the battery as

required. This process will also reduce water loss and help prevent the battery from ‘drying out’.

Discharge Protection – Protects your battery from discharge at night. Under low light or no

light conditions the solar panel voltage could be less than the battery voltage. The unit contains

a special circuit which prevents current flowing back from the battery and into the solar panel.

LED Indicators – Coloured LED’s to easily indicate the operational status and battery conditions.

Unit Protection – Multi charging protects against reverse polarity, short circuit, over temperature,

over voltage, etc.

P/No. SPM80K SPM120K

TYPE MONOCRYSTALLINE

RATED POWER 80W 120W

OPEN CIRCUIT VOLTAGE 21V

SHORT CIRCUIT CURRENT 5.0A 7.52A

PEAK POWER VOLTAGE 17.5V

PEAK POWER CURRENT 4.56A 6.86A

TEST CONDITIONS 1000W/m2, 25˚C

FUSE 10A

BATTERY CONNECTIONS Battery Clamps

WEIGHT 4.7kg 6.8kg

APPROVALS EMC

BATTERY SIZES 250–900CCA 250–1200CCA

300–1000MCA 350–1500MCA

20–140Ah 40–200Ah

CHARGE TIME 7–35 Hours

Patent Pending

BATTERY TYPE SELECTION

Please check your battery manufacturer’s specifications to select correct battery type.

The unit provides 4 battery types for selections: Gel, AGM, WET (conventional lead acid),

and Calcium.

There is a DIP switch at the back of the solar charge controller, this Dip switch is used for

presetting your battery type. Please refer to Figure 1.1 to make DIP switch setting for the proper

battery chemical; the factory default setting is at AGM battery type.

Figure 1.1: Battery Type Setting via DIP switch

Note: Once the Dip switch setting or external wire connection is finished, do not freely change

the DIP switch or external wire connected; otherwise it may damage your battery.

Especificaciones del producto

Marca:	Projecta
Categoría:	Paneles solares
Modelo:	SPM120K
Peso.:	1120 g
Ancho:	68 mm
Profundidad:	220 mm
Altura:	38.8 mm
Código de seguridad internacional (IP):	IP20
Certificados de sostenibilidad:	RoHS
Potencia de salida:	150 W
Abarcando:	42 V
voltaje-de-entrada-de-CA:	90 - 305 V