Pure Acoustics MCP-20BT Manual de Usario

Lee a continuación 📖 el manual en español para Pure Acoustics MCP-20BT (4 páginas) en la categoría sistema de karaoke. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
www.pure-acouscs.com
MCP- 20BT
Wireless Portable Karaoke Machine
User & Safety Guide
www.pure-acouscs.com
Control Panel
FEATURES
Bluetooth Stream Audio wirelessly from any bluetooth enabled device
Plays MP3 Files stored on your SD Card or USB Flash drive
*Max Capacity 8GB for SD Card or USB Port
Rechargeable Lithium Ion battery
Play/Pause /Forward/Rewind Buttons on unit & remote for easy access.
Full Function Infrared Remote Control
On/O Power butt on
AUX IN to connect to External Audio Players (ipods®/iphones®/ipads®/smartphones®
etc.)
Audio output/Headphone port
www.pure-acouscs.com
Charg g the Unit in
Place the supplied Rechargeable Lithium-ion battery (BL-5C) into the battery
compartment on the back of the unit. Connect one end of the supplied USB cable to
your computer or Compatible USB AC/DC Adaptor (not included) & the other end ofthe
cable to the speaker to charge the speaker unit. The Red charging light on the control
panel will come on. Do not charge the unit for more than 5 hours as this will aect the
Battery Life.
DO NOT USE THE UNIT WHILE CHARGING THE BATTERY.
You can use the Unit without the battery in the battery compartment, as long as the unit
is connected to a compatible USB power source.
Playing MP3 les through the speaker using the SD Card or USB Stick
The control panel is located on the front of the Speaker Unit.
1. PIug in your USB connectible device and/or SD Card in the slots provided. Please
make sure to you use the correct le format in your media devices MP3 FILES
ONLY.
2. Turn the power switch to the on position; the LED display will come on. Press the
“MODE" button on the Unit or Remote to switch between USB, SD, FM Radio or AUX
modes. The les from your media should start playing, If music does not play, press the
PLAY/PAUSE button to ensure that the device is in PLAY mode. Please ensure that
your speaker is fully charged & that your les are in MP3 format, & that the Mode
button is on the correct source.
3. Turn up the volume to the desired level, either from the unit's volume control on the
control panel pressing & holding (2-3 Seconds) PREV/VOL- for Volume Down or by
NEXT VOL + for Volume up, or from the remote by pressing Vol- for Down or Vol+ for /
up. The Sound Output quality o the speakers will depend on the quality of the MP3
les not the device itself
4. Short Press the PREV/ VOL - to listen to the previous track or NEXT/ VOL + to skip to
the next track press | 4 4 button to listen to the previous track or F > | on the Remote or
Control.
5. To PAUSE a track, press the PLAY/PAUSE button from the Control Panel or the >
signal | from the Remote Control.
6. Please remember to power o the Speaker before removing the USB Disk or SD Card
as this may damage the unit and/or the storage device.
7. FAILURE TO FOLLOW ANY or ALL of THESE INSTRUCTIONS MAY DAMAGE THE
SPEAKER SYSTEM & WILL VOID THE WARRANTY .For external Devices such as
iPods®, iPhones®, iPads®, smartphones, MP3, MP4 players or other audio devices,
use the included 3.5mm to 3.5mm cable and connect it to the AUX put port. Press in
AUX on the unit or press MODE on the remote control to switch to AUX mode.
PLEASE NOTE THAT WHILE IN AUX MODE, THE VOLUME CAN ALSO BE
CONTROLED FROM YOUR EXTERNAL DEVICE OR FROM THE SPEAKER/REMOTE.

Especificaciones del producto

Marca: Pure Acoustics
Categoría: sistema de karaoke
Modelo: MCP-20BT

¿Necesitas ayuda?

Si necesitas ayuda con Pure Acoustics MCP-20BT haz una pregunta a continuación y otros usuarios te responderán




sistema de karaoke Pure Acoustics Manuales

sistema de karaoke Manuales

Últimos sistema de karaoke Manuales