Pyle Pro PWMA1216BM Manual de Usario

Lee a continuación 📖 el manual en español para Pyle Pro PWMA1216BM (8 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Portable PA Speaker Amplifier
& Microphone System
Bluetooth Wireless Streaming, Built-in Rechargeable Battery, Accessory Kit
(Includes Handheld Mic, Headset Mic, Lavalier Mic, Belt Pack Transmitter)
PWMA1216BM
www.PyleUSA.comwww.PyleUSA.com
2 3
CAUTION
1. This unit has a speaker inside which can cause magnetic eld. Keep this
unit at least 60cm away from computer or TV.
2. This unit has built-in rechargeable battery. Please recharge the battery
every 2 months if you are not going to use the unit for a long period of
time to prevent battery damage.
3. If the battery is damaged please replace with same specications battery
and dispose the damaged battery environment friendly.
4. Free from high temperature. Don't expose the device to hot equipment.
5. Don't place the device in the environment of humidity and dirts.
6. Place the device in the ventilated environment.
7. Don't pull the power cord while you pull out the plug. Hold the plug
tightly to pull it out.
8. Pull out the AC power if you will not use the device for a long time.
9. Your operation must be subjected to the specied voltage marked
near the AC in jack and complied with this guide.
PARTS DESCRIPTION
AC POWER OPERATION
Plug one end of provided AC cord into the AC input jack on the right side of
the amplier. Then plug the other end of AC cord into AC power outlet. Turn
on the unit using the power/volume switch.
NOTE:
To avoid damaging your unit, make sure AC power is same as that marked
near AC input jack)
DC POWER OPERATION
This unit can be powered also using external 12V DC power.
Connect external 12V DC power to DC input jack on top panel of the
amplier. Observe the correct polarity as following.
23
TRE BLE
BASS
ECH O
CHG
REC OUT MIC IN W/MIC VOL POWER
ON
OFF
MP3 VOL
DC 12V
15
14
13
12
11
10
9
8
7 6
5
4
3
2
1
16
17
18
19
20
21
22
10. T
1
1. Power ON/OFF switch
2. MP3 volume control
3. Power ON LED indicator
4. RF ON LED indicator
5. External DC input jack
6. Wireless receiver antenna
7. Charge LED indicator
8. Echo level control
9. Bass level control
reble level control
1. Record out jack
12. MIC Input jack
13. Wired/wireless MIC
volume control
14. MP3 display
15. MP3 mode
16. MP3 previous/volume-
17. MP3 next/volume+
18. MP3 play/pause
19. USB port
20. SD/MMC card slot
21. Speaker
22. AC input jack
23. Battery compartment

Especificaciones del producto

Marca: Pyle Pro
Categoría: sistema de alta fidelidad
Modelo: PWMA1216BM

¿Necesitas ayuda?

Si necesitas ayuda con Pyle Pro PWMA1216BM haz una pregunta a continuación y otros usuarios te responderán




sistema de alta fidelidad Pyle Pro Manuales

sistema de alta fidelidad Manuales

Últimos sistema de alta fidelidad Manuales