Pyle PDA20BT Manual de Usario

Pyle receptor PDA20BT

Lee a continuación 📖 el manual en español para Pyle PDA20BT (6 páginas) en la categoría receptor. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Desktop Wireless BT Audio Amplifier
PDA20BT
Compact Mini Blue Series Stereo Power Amplier
(2 x 100 Watt MAX)
www.PyleUSA.com
2
Read through this user manual before using the product to ensure
its correct use. Keep this manual for future reference.
Quick Setup:
Front Panel
Rear Panel
1. Main Power ON Switch: Switch ON/OFF the amplier by using this switch.
2. Adjust to boost or cut HIGH frequencies.TREBLE KNOB:
3. Adjust to boost or cut LOW frequenciesBASS KNOB:
4. Master Volume: Adjusts main audio system volume level.
5. RED--LINE input modelInput LED:
Green--Wireless BT input model.
6. Lets you connect the desired LINE input source.RCA L/R LINE Input:
7. Banana Type Speaker L/R Terminals: Lets you easily connect speaker wires
directly to the Amplifer.
8. Connect the adaptor DC.POWER In Jack:
9. Wireless BT Antenna: Wireless BT Streaming receiver
6 7 8
9
1 5 2 3 4
www.PyleUSA.com
3
Setup and pairing (Wireless BT ampliers) are really easy. The following
instructions will help you connect Audio Ampliers to your music system or
pair with your tablet, computer, or smartphone.
1. Connecting the Speaker Wire
Audio stereo power ampliers that will power one pair of passive speakers
between 4 and 8 ohms (or subwoofer if you got the 2.1 CH amp or subwoofer
amp). To connect the amplier to your speakers you will need 2-conductor
stranded speaker wire. The ampliers use high-quality binding posts that will
accept heavy gauge bare wire banana plugs, spade lugs, or pin terminators.
If you use your own speaker wire we recommend using at least 16 gauge wire
and using the same length of wire from the amplier to each speaker It's also a
good idea to turn o your amplier before connecting power, audio sources or
speakers.
Preparing the Speaker Wire
1. Separate the last 3" of each speaker wire conductor.
2. Strip 1/2" of insulation from the end of each wire.
3. Twist the exposed copper strands with your ngers 3 or 4 times so the strands
stay together.
NOTE:
As you make your connections, be sure to connect the positive (+) terminals on
your amplier to the positive (+) terminals on your speakers. Even if your wire does
not have (+) or (-) markings, most 2-conductor speaker wire has printing on one
side to help you dierentiate between the wire pairs.
If you are Using Bare Wire
1. Use your thumb and nger to unscrew the binding post connectors on the back
of each speaker.
2. Insert each speaker wire into the holes on the side of the binding post connectors,
observing proper polarity.
3. Retighten the binding posts with your ngers.
4. The stripped portion of the wire should be secured rmly in each connector.
5. Make sure that none of the speaker wire strands have come in contact with an
adjoining terminal.

Especificaciones del producto

Marca: Pyle
Categoría: receptor
Modelo: PDA20BT

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PDA20BT haz una pregunta a continuación y otros usuarios te responderán




receptor Pyle Manuales

receptor Manuales

Últimos receptor Manuales