Pyle PTAUWIFI46 Manual de Usario

Pyle receptor PTAUWIFI46

Lee a continuación 📖 el manual en español para Pyle PTAUWIFI46 (7 páginas) en la categoría receptor. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
Compact WiFi Amplifier Receiver
Wireless Music Streaming Amp System
with Mic Paging/Mixing, 240 Watt
PTAUWIFI46
www.PyleUSA.comwww.PyleUSA.com
2 3
Introduction
Pyle's Compact WiFi Amplier Receiver is the perfect solution for all of
your audio needs, and is a easy way to get your music playing through a
connected speaker system. Using the latest sound amplication
technology and an impressive 240 Watt power output, this receiver is
designed to allow you to stream your music wirelessly both by WIFI
Wireless Network Audio and Bluetooth Wireless Audio; and is also
designed to deliver pure stereo sounds via the unit’s front panel AUX
(3.5mm) Input Jackto all of your favorite devices (like Smartphones,
Tablets, Laptops, Computers, etc. ). Additional system features include
1/4" Microphone Input and 1/4 Headphone Input. Push Type Speaker
Terminal connectors, RCA Stereo Inputs, RCA Rec. Output.
Take control of your sound with the PTAUWIFI46 Compact WiFi
Amplier Receiver.
Enjoy versatile streaming ability wired and wireless with the
PYLE Compact WiFi Amplier Receiver
Wireless Setup & Connection:
There are (2) dierent types of wireless connection audio streaming
methods, WiFi and Direct Connect. Please read the following method
information and understand the dierence between the connection
types prior to connecting your device.
Method 1: Connecting via WiFi
This method is used for streaming internet radio services, through the
Wall Plate Receiver, via your compatible device.
Method 2: Direct Connection (Streaming Music Saved on Your Device)
This method is used for streaming compatible audio files, through the
Wall Plate Receiver, that are saved directly on your device's memory.
W IF I
B T W P SV LO - V L +O1 2 3 4 5 6
1 2 3 4
5678
9101112
13
1415
16
WIFI BT ANT/
LAN
1718
192122 20
FRONT PANEL
BACK PANEL
Control & Function Layout
Features and Controls:
1. Power ON/OFF LED Indicator
The Indicator Lights When the Amplier is Turned On.
2. Blue LED Output Level Indicators
3. Bluetooth Signal Indicator
4. WlFl Control
*1/2/3/4/5/6 STORE Buttons
6 Pre-Store Folders, you can pre-store 6 Music Folders as your favorite
ones, and can loop playback, or choose one of them by press the
button.
www.PyleUSA.comwww.PyleUSA.com
4 5
Control & Function Layout
* VOL- / VOL+ : Buttons for Volume + or Volume -
* / : Button Switches to Previous Song or Next Song
* : Button Switches to Play or Pause
*WIFI: WIFI Signal Indicator
*WPS: WIFI Protected Setup
5. WIFI/ BT/ AUX2/ AUX1 Input Selector
Lets you Select the Desired Input Music Source between WIFI / BT /
AUX2 / AUX1
6. BASS and TREBLE Controls
Allows You to Boost or Attenuate Bass and Treble for the Desired
Sound.
7. BALANCE
Lets you Adjust the Sound Balance Between the Left and Right of
Amplier Outputs.
8. MASTER Volume Control
Lets You Control the Overall Volume Level. It Doesnt Aect the
Volume of MIC.
9. MIC Volume Control
Lets You Adjust the Volume of Connected MIC to the Proper Setting.
10. 1/4” PHONE Input Jack
Accepts Headphones with 1/ 4” Plug.
11. MP3 3.5mm AUX Input Jack
Let You Easily Connect the Computerized MP3 Device (Player)
Sources, Such as Mobile Phone, Laptop, iPad, Walkman, etc.
12. POWER ON/ OFF Switch
13. FUSE: Replaceable Power Fuse
The Amplier Uses a Fuse for Protection Against Surges and Short
Circuit. If the Amplier Suddenly Turns O and Will Not Turn On,
Check the Fuse and If Necessary Replace it with a 1. 5- Amp,
250-Volt, Fast-Acting, 5x20mm Fuse (Not Supplied).
Control & Function Layout
14. WIFI/BT Antenna
15. PAGER/MIXIG
Set to PAGER, the signal from AUX1 and AUX2 will be attenuated by
- 12dB and the signal from MIC will override to page (Auto Talkover)
It is good for Paging System, Set to Mixing, the signal from AUX1/
AUX2 and MIC will be existed at the same time, It acts like playing at
KARAOKE Event.
16. AC IN Power Plug
Connect to AC 110V/ 60Hz, or AC 230V/ 50Hz Outlet.
17. 115V/ 230V Voltage Selector
The amplier has Selectable Input Voltage from 110V/ 60Hz
(the standard in USA and CANADA) to 230V/ 50Hz (for EUROPEAN &
some countries of SOUTH AMERICA Operation). Please make sure
the switch is in the proper position before operating, otherwise, the
severe damage will be incurred and not covered by warranty.
18. Push Type Speaker Terminal
Lets you easily connect speaker wires directly to the amplier.
The speaker impedance can be ranged from 4 to 8 ohms for the
general stereo output. The total speaker impedance must be at least
4- ohm per channel at stereo mode.
19. LAN Input Port
LAN Interface Input by Router
20. REC. RCA Output
Lets you connect the amplier to a recording unit or one more
amplier.
21. AUX1/ AUX2 Inputs
Lets you connect most high level audio sources such as CD/DVD
Player, Tape Deck, Tuner, Camcorder, or VCR, etc.
22. 1/ 4" MIC Input Jack
Lets you connect a microphone with 1/ 4” Plug.

Especificaciones del producto

Marca: Pyle
Categoría: receptor
Modelo: PTAUWIFI46

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PTAUWIFI46 haz una pregunta a continuación y otros usuarios te responderán




receptor Pyle Manuales

receptor Manuales

Últimos receptor Manuales