Pyle PDWR30B Manual de Usario

Pyle Vocero PDWR30B

Lee a continuación 📖 el manual en español para Pyle PDWR30B (2 páginas) en la categoría Vocero. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
www.PyleUSA.com
PDWR30B
Excellent for Use On Boats/ Marine/ Decks/ Patios/ Poolside/ Outdoors
Completely Water Proof
3.5'' Aluminum Injection Cone Woofer
40 Oz. Magnet Structure
1'' High Compliance Myiar Tweeter
Capacitor Crossover Network
Bass Reex Vent for Added Bass Response
Heavy Duty ASB Construction
Quick Connect/ Disconnect Speaker Terminals
Unique Spring Loaded Mounting System
Removable Rustproof Mesh Grills
Power: 150Watts RMS/ 300Watts Peak
Frequency Response: 60-20K Hz
Impedance: 4 Ohms
Dimensions: 4.75''(W)x 7.25''(H) x 4.75''(D)
HOW TO INSTALL
MOUNTING THE BRACKET
4. DrIII pllot holes Into the mounting surface.
5. Gently pull the speaker wire though the wire hole in the center of the mounting bracket,
so that the holes all line up.
6. Use your hardware to attach the bracket to the mounting surface.
1. Remove the bracket knobs and the bracket from the speaker.
2. Hold the bracket up to the mounting surface. "PDWR30B
Waterproof Speakers" can be mounted either horizontally
or verticalIy, hold the bracket so that the speaker wire ts
through the large, circular wire hole in the bracket, align the
bracket to be square with the surrounding (Use A level for
accuracy)
3. Mark the locations of the three shaped screw holes, use all of
the holes.
MOUNTING
www.PyleUSA.com
FINAL ADJUSTMENTS
1. After checking that the speaker is in-phase and works correctly, angle the speaker for the
best sound.
2. Hand tighten rhe bracket knobs only, power tools may over-tighten rhe knob, and strip
the threads of the insert.
3. Check that the entire installatlon is safe and secure.
CONNECTING YOUR SPEAKERS
Connecting the speakers to your amplier or receiver.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
3
First turn your amplier OFF to avoid
damage which may result from accidental
shorting of the speaker leads.
Correct phase polarity is critical for proper
stereo imaging and bass performance.
The red (+) terminal on your amplier or
receiver must be connected to the red (+)
terminal on your speaker, the same
applies for the balck (-) terminal.
Connect one loudspeaker at a time to
ensure proper connection of left and
right channels. Make sure all wires are
rmly fastened.
If you notice a high lavel of bass or
central image focus, double check your
connections for proper polarity.

Especificaciones del producto

Marca: Pyle
Categoría: Vocero
Modelo: PDWR30B

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PDWR30B haz una pregunta a continuación y otros usuarios te responderán




Vocero Pyle Manuales

Vocero Manuales

Últimos Vocero Manuales