Pyle PLRGSW64BK Manual de Usario

Pyle Vocero PLRGSW64BK

Lee a continuación 📖 el manual en español para Pyle PLRGSW64BK (14 páginas) en la categoría Vocero. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/14
Features:
6.5'' Slim Waterproof Subwoofer
Completely Waterproof
For Marine or Car Use
Multi-Color RGB Lights and Remote Control
PP Cone with Rubber Edge
High-Powered Car Subwoofer
Lab Tested Pro Audio Woofer Performance
Massive Butyl Rubber Surround
High Strength Engineering Plastic Basket
Quick Connect Speaker Terminal Plate
Compatible with Sealed Enclosure Speaker Box Audio Setup
Impressive Bass Response, Low-Resonance Frequency Output
Designed for Custom Audio Car, Truck, Mobile Vehicle Applications
Installation Guide
Screw down each of the four Phillips
head screws. The locking tabs will
swivel into place and secure the unit
to the rear surface of the drywall.
Put in the strips of adhesive to
secure the grille.
Replace the metal grille.
6.5'' Slim Waterproof Subwoofer
150 Watts at Dual 4-Ohms Car Audio Powered Subwoofer with Multi-Color RGB Lights
and Remote Control, PP Cone with Rubber Edge
PLRGSW64WT - PLRGSW64BK
www.PyleUSA.com
Connection Diagram
Cut the drywall.
Note: Always allow at least one-half
inch between a wall stud and the
speaker cutout or the locking tabs
will not be able to swivel into place.
Connect the speaker wires to the
speaker.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Remote Control
www.PyleUSA.com
1. Turn On/Standby: Press this key to turn unit or switch to stand by mode. At power on, unit will automatically ON
turn ON and restore to previous status.
2/9. Switch to dynamic mode from static color or switch between dynamic modes.Dynamic Mode Adjust:
3/10. Adjust dynamic playing speed. Press to increase speed and press Dynamic Speed Adjust: SPEED+ SPEED- to
decrease. Unit will switch to dynamic mode if pressing this key at static color mode.
4/5. Static Color Adjust: Switch to static color mode from dynamic mode, or switch between static colors.
6. Shortcut key to static colors. When pressing the specic color key, LED will play the same Direct Color Select:
static color. The direct colors are included in 'COLOR+ COLOR-' and ' ' operation.
7/8. Adjust static color brightness. Press to increase brightness and press Brightness Adjust: BRIGHT+ BRIGHT- to
decrease. Unit will switch to static color mode if this key is pressed at dynamic mode.
11. Press this key to switch to Demo mode. At demo mode, it plays 17 dynamic modes in loop, each Demo Mode:
mode repeat 3 times.
What's in the Box:
6.5'' Slim Waterproof Subwoofer; RGB wire; remote control
Technical Specs:
Construction Materials: Engineered ABS
Power Handling: 150W Max, 75W RMS
Impedance: Dual 4 Ohms
Voice Coil: 1.0'' -in
Voice Coil Type: High-Temp Aluminum
Magnet Size: 20 Oz
Magnet Type: Barium Ferrite Magnet
Frequency Response: 50Hz - 400Hz
Sensitivity: 90 dB
Remote Control Battery Operated, Requires (1) x CR2025’ Batteries
Battery Type: 3V Lithium Battery
Battery Life: Up to 2+ Hours
Product Dimensions: 6.8'' x 5.8'' x 2.2'' –inches

Especificaciones del producto

Marca: Pyle
Categoría: Vocero
Modelo: PLRGSW64BK

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PLRGSW64BK haz una pregunta a continuación y otros usuarios te responderán




Vocero Pyle Manuales

Vocero Manuales

Últimos Vocero Manuales