Pyle PLDMR27NBK Manual de Usario

Pyle No categorizado PLDMR27NBK

Lee a continuación 📖 el manual en español para Pyle PLDMR27NBK (14 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/14

PLDMR27NBK

Marine Stereo Receiver Power Amplifier

AM/FM/MP3/USB/BT/AUX/DVD/CD Marine Stereo Receiver, Double DIN,

30 Preset Memory Stations, LCD Display with Remote Control

www.PyleUSA.com

To ensure correct operation and avoid damage,

please read this user manual carefully before using this product.

INSTALLATION

Installation Procedures

1. First complete the electrical connections and then check for correctness.

2. Disconnect the battery negative terminal of vehicle before beginning installation.

Installation Opening

This unit can be installed in any dashboard having an opening as shown below.

To Install the Car Radio

Be sure you test all connections rst, and then follow these steps to install this unit.

1. Make sure the ignition is turned o, and then disconnect the cable from the

vehicle battery’s negative (-) terminal.

2. Disconnect the wire harness and the antenna.

3. ” brackets (2pcs) on the both sides of the car receiver with screws Attach the “L

(M5 x5) as shown as the below gure. The others xing screws that x the

other terminal of the “ ” metal bracket, please buy from your dealer according L

to the drilling of holes size.

103 mm

182 mm

www.PyleUSA.com 3

INSTALLATION

Connect all wiring harness and slide the head unit into the mounting collar

until it clicks into place.

Wiring Connections

- +12V DC Negative Ground.

- Only use speakers with 4 ohms impedance.

- The maximum current of the Amp remote trigger is 200mA.

1. Speaker Connectors:

Violet: Right Rear (+)

Violet / Black:Right Rear (-)

Gray: Right Front (+)

Gray/Black: Right Front (-)

White: Left Front (+)

White/Black: Left Front (+)

Green:Left Rear (+)

Green/Black: Left Rear (-)

2. Power Connectors:

Blue: Antenna / Remote

Red: Ignition (+12V)

Yellow: Battery (+12V)

Black: Chassis Ground (-)

V-OUT1

AUX-L F-L

F-R

R-L

R-R

ANT

AUX-R

V-OUT2 SUB

3. Fuse 10A

4. Audio / Video Inputs & Outputs

V-OUT1: Video Output 1 (Yellow)

AUX-L: Audio Input Left CH

AUX-R: Audio Input Right CH

V-OUT2: Video Output 1 (Yellow)

F-L: Front left PRE-AMP output (White)

F-R: Front right PRE-AMP output (Red)

SUB: Subwoofer Output (Green)

R-L: Rear left PRE-AMP output (White)

R-R; Rear right PRE-AMP output (Red)

5. Radio Antenna Socket

Especificaciones del producto

Marca:	Pyle
Categoría:	No categorizado
Modelo:	PLDMR27NBK
Color del producto:	Wit
Peso.:	363000 g
Ancho:	690 mm
Profundidad:	726 mm
Altura:	1250 mm
Dimensiones interiores (An x Pr x Al):	400 x 405 x 885 mm
Tipo de ranura:	Platte sleutel