Pyle PSIB27X2 Manual de Usario

Lee a continuación 📖 el manual en español para Pyle PSIB27X2 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Handle: This side should be the top side
www.PyleUSA.com
PSIB27X2
2 Pcs. Sound Recording Booth Box
Studio Soundproong Foam Shield Isolation Filter Cube
Note: Microphone and tripod are not included in the list
of contents.
The portable sound booth is used to provide sound
protection and to reduce sound reection. The booth can
be open and assembled in a short time. It could be placed
on the table. It is suitable for various kind of microphone
including vocal microphone, instrument microphone and
other recording microphone, etc.
Note: Please read this user’s manual carefully before using the sound booth. Any
mishandling of the product due to misunderstand of negligence of this manual may
lead to malfunction.
Installation Guide
1. Take all the contents from the package and make them properly placed
2. Pull the handle of the booth frame and make it properly structured, the side with
the handle should be in the top when you set up your booth.
3. Zip the back side of the frame.
This zip gap can be also used for the mic cable, add the
mic cable rstly if you want to let you mic cable go from
the back,the XLR female end should go inside normally
around 2ft.
www.PyleUSA.com
4. Put down the exible board and make it support the back side of the frame.
In order to make sure each foam to stay on the inner side well please follow the
below steps
5. Take out one of foam and insert it, aligning it with the top surface.
6. take out a second foam and insert it, aligning it with the right side surface.
7. Take out the third foam and insert it, aligning it with the left side surface
8. Take our the fourth foam and lay it against the back side surface.
This products can expose you to a chemical or group of checmicals, which
may include ”Di (2-ethylhexyl) phthalate (DEHP)” which is known in the
state of California to cause cancer, birth defects, or other reproductive
harm. For more info, go to https://www.p65warnings.ca.gov/.
www.PyleUSA.com
If you nd the top foam can’t stay well, you can use the double side glue sticker to
stick the top foam with the top side.
9. Then you can place your microphone with tripod base or round mic base inside,
connect your mic cable with microphone,install your pop lter on the stand then
start to record.
Features:
Versatile Mic Recording & Sound Isolation Ability
• Portable and Compact Cube Design
• Ready to Record: Quick & Easy Setup
• Soundproong Studio Foam 'Wedgie' Acoustic Tiles
• Box-Style Engineered for Maximum Absorption/Isolation
• High-Density Noise-Absorbing Acoustic Foam
• Perfect for Studio Recording, Podcasts, Vocals, Singing, etc.
• Run Cables Through Rear Panel Zipper
• *Tripod Mount & Microphone not included
What's in the Box:
• (2) Sound Recording Booth Box • (8) Studio Foam
Technical Specs:
• Construction Material: Polyester
• Opened Dimensions (L x W x H): 12.2'' x 13.0'' x 13.3'' -inches
• Folded Dimensions (L x W x H): 25.2'' x 13.2'' x 2.4'' -inches

Especificaciones del producto

Marca: Pyle
Categoría: No categorizado
Modelo: PSIB27X2

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PSIB27X2 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Pyle Manuales

No categorizado Manuales

Últimos No categorizado Manuales