Pyle PLR2DN Manual de Usario

Lee a continuación 📖 el manual en español para Pyle PLR2DN (16 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
www.PyleUSA.com
2
To ensure correct operation and avoid damage,
please read this user manual carefully before using this product.
INSTALLATION
Installation Procedures
First complete the electrical connections and then check for correctness.
Installation Opening
This unit can be installed in any dashboard having an opening as shown below.
To Install the Car Radio
Be sure you test all connections rst, and then follow these steps to install this unit.
1. Make sure the ignition is turned o, and then disconnect the cable from the
vehicle batterys negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. brackets (2pcs) on the both sides of the car receiver with screws Attach the L
(M5.5 x 7) as shown as the below gure. The others xing screws that x the
other terminal of the metal bracket, please buy from your dealer according L
to the drilling of holes size.
4. Consult with you nearest dealer if installation requires the drilling of holes or
other modications of the vehicle.
5. Install this car receiver in the dashboard.
6. Make wiring connections, as illustrated in the Wiring Diagram.
7. Install the plastic outer trim ring.
103 mm
182 mm
www.PyleUSA.com 3
INSTALLATION
Connect all wiring harness and slide the head unit into the mounting collar
until it clicks into place.
Wiring Connections
ANT: Radio Antenna Socket
FL: Front Left Pre-Amp RCA Output (White)
FR: Front Right Pre-Amp RCA Output (Red)
RL: Rear Left Pre-Amp RCA Output (White)
RR: Rear Right Pre-Amp RCA Output (Red)
10A: 10A Fuse
ACC/ignition (Red)
GND/ground (Black)
ANT/aerial (BLUE)
Power/battery (Yellow)
- +12V DC Negative Ground.
- Only use speakers with 4 ohms impedance.
- The maximum current of the Amp remote trigger is 200mA.

Especificaciones del producto

Marca: Pyle
Categoría: No categorizado
Modelo: PLR2DN

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PLR2DN haz una pregunta a continuación y otros usuarios te responderán




No categorizado Pyle Manuales

No categorizado Manuales

Últimos No categorizado Manuales