Pyle PWD901 Manual de Usario

Pyle Sistema de alarma PWD901

Lee a continuación 📖 el manual en español para Pyle PWD901 (24 páginas) en la categoría Sistema de alarma. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

STANDARD FEATURES

Some of the system’s standard features include:

• 4-button remote transmitter

• LED Status indicator

• Valet/Override switch

• Extended Range Receiver

• 125dB Multi-tone siren

• Dual stage impact detector

• Remote panic

• Remote Valet mode

• Remote chirp delete

• Remote sensor bypass

• Passive or active arming

• Flashing parking lights

• Auto Rearming

OPTIONAL FEATURES

This system has many optional features that

may require additional parts and/or labor.

Please contact your dealer for more details.

• Remote keyless entry (door lock/unlock)

• Illuminated entry

• LCD 2-way Remote

• Hood & trunk protection

• Trunk/hatch release

• Window roll-up

• Additional sensors

• Remote Start (optional plug-in module)

• Stop & Go Feature

• Auto Cold Start

Note: Some features may not be appropriate

for certain vehicles.

REMOTE TRANSMITTER BUTTONS

NOTE: Transmitter cosmetics may differ

between models and between standard 1-way

and LCD 2-way transmitters, but button

functions remain the same as described below.

Each transmitter button has two operating

modes: standard and level shifted. Pressing a

transmitter button for less than one second

activates the standard function associated with

that button (such as arm or disarm). Pressing a

button for more than one second changes the

color of the standard transmitter’s LED to

green and activates the level shift feature.

While the LED is green (level shifted), pressing

any transmitter button accesses another level

of commands providing expanded operation.

Transmitter Icons

Button 1 Button 2

Button 3 Button 4

SYSTEM MANUAL

VEHICLE SECURITY SYSTEM

Optional Remote Start Module and 2-way Transmitter Instructions Included

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will ﬂash once.

• The doors will lock.*

• The LED will turn solid for 10 seconds

then start flashing slowly. After 10

seconds the system is armed.

During Arming, if the hood or trunk is open or

the brake pedal is pressed, the system will wait

10 seconds for the zone to close. If a door is

open the system will wait up to 60 seconds for

the zone to close (depending on door zone

setting during installation). If a zone remains

open after the wait period, the siren will chirp

and the parking lights will ﬂash 4 times to

indicate the zone is still open. That zone will be

ignored, but keep all other areas remain

protected.

While Armed, the system will trigger if:

• The door, hood, or trunk is opened.

• The brake pedal is pressed.

• The shock sensor detects an impact.

• An optional sensor is disturbed.

When triggered by the door or hood/trunk

input the siren will sound or the horn will honk,

and the parking lights will ﬂash for 30 seconds.

If triggered by a sensor, the alarm cycle will last

15 seconds. If the alarm is triggered while the

optional remote start is engaged, the remote

start will immediately shut down.

If a zone triggers the system 3 times during a

single arming cycle, the system will bypass that

zone, keeping the other zones protected, until

the next time the system is armed.

If the shock sensor detects a light impact to the

vehicle or an optional sensor is disturbed, the

system will chirp and the parking lights will ﬂash

5 times to warn away the potential intruder.

*Optional Feature

PASSIVE ARMING OPERATION

The passive arming feature allows the system to

arm automatically without user intervention.

This feature can be toggled on/oﬀ using the

transmitter.

To turn passive arming on/off:

1. Press and hold button 2 for level shift.

2. Press button 4.

• The system will enter passive arming

operation mode.

• The optional 2-way LCD transmitter

display will show “LAST DOOR ARM”.

To arm the system passively:

1. Turn the ignition key oﬀ.

2. Exit the vehicle and close all doors.

• The siren will chirp and parking lights

will flash once after closing the last door.

• The LED ﬂashes rapidly indicating that

the system is preparing to arm. (The

system can be armed at any time by

pressing transmitter button 1.) NOTE:

Opening the hood/trunk or a door

resets the passive arming timer.

• After 30 seconds the siren will chirp to

indicate the system is armed.

• The parking lights will ﬂash once.

• The doors will lock.†*

†If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 2.

• The siren will chirp twice.¥

• The parking lights will flash twice.¥

• The doors will unlock.*

• The dome light will turn on.*

¥If the alarm was triggered while away, the system will respond

with 3 chirps and 4 parking light flashes.

*Optional Feature.

TAMPER ALERT

If the alarm was triggered while away from the

vehicle, the siren will chirp 3 times and the parking

lights will flash 4 times on disarming for tamper

indication. The triggered zone will be shown on the

optional 2-way LCD transmitter display.

AUTO REARM

If the system was armed for at least 10 seconds,

the Auto Rearm feature re-arms the system 30

seconds after disarming. The doors will also re-

lock if selected during installation. NOTE:

Opening the door resets the rearm timer, and

opening the trunk, hood, or turning on ignition

cancels the auto rearm feature. The Auto Rearm

feature must be enabled during installation.

AUTO IMMOBILIZER

The Auto Immobilizer feature automatically

engages the starter defeat relay 30 seconds

after turning oﬀ the ignition. This feature

provides an extra level of security even when

when the alarm is not set. When immobilized,

the vehicle will not start with the key until

either transmitter button 2 is pressed, or the

override button is pressed with the ignition on.

NOTE:The auto immobilizer feature does not

operate while in the valet mode.

To turn the immobilizer on/oﬀ:

1. Press and hold button 2 for level shift.

2. Press button 3.

• The optional 2-way LCD transmitter

display will show “IMMOBILIZE”.

SILENT OPERATION MODE

Press transmitter button 4 to turn the arm and

disarm chirps on/oﬀ. NOTE: If the system is

disarmed, pressing button 4 to change the siren

status also arms the system. To disarm the

system, press button 2.

NOTE: The optional 2-way transmitter will still

beep to conﬁrm systems arm/disarm.

IGNITION CONTROLLED LOCKS

The ignition controlled locks feature allows the

doors to automatically lock when the brake

pedal is pressed (after turning on the ignition

and closing all doors), and automatically unlock

when the ignition key is turned oﬀ. The ignition

controlled locking feature may also be

programmed for ignition lock without ignition

unlock, and oﬀ (no ignition control).

NOTE: If the optional remote start module is

not installed and ignition locking is desired, the

feature must be programmed for use without

brake. See Alarm Programmable Features.

REMOTE PANIC

In the event of an emergency (PANIC)

situation,the system’s siren can be triggered for

30 seconds to attract attention.

To activate the Panic Feature:

Press transmitter buttons I&2 for 3 seconds.

• The siren will sound.

• The parking lights will ﬂash.

Press button I to exit panic mode and rearm

the system. Press button 2 to exit panic mode

and disarm the system. The Panic Feature will

NOT operate when the ignition is on.

EMERGENCY OVERRIDE

If the transmitter becomes lost or fails to

operate, the system can be disarmed by using

the emergency override feature.

To override the system:

1. Enter the vehicle.

• Because the system is armed, the siren

will sound.

2. Turn on the ignition key.

3. Press the Valet switch for 3 seconds.

• The siren will stop sounding.

• The starter defeat is deactivated.

Especificaciones del producto

Marca:	Pyle
Categoría:	Sistema de alarma
Modelo:	PWD901

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PWD901 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Sistema de alarma Pyle Manuales

Pyle PWD901 Manual de Usario

29 Julio 2024

Sistema de alarma Manuales

Últimos Sistema de alarma Manuales

Elro AG40MA11 Manual de Usario

3 Octubre 2024

IKEA BLÅSJÖN 105.740.93 Manual de Usario

2 Octubre 2024

IKEA PATRULL 100.989.49 Manual de Usario

30 Septiembre 2024

IKEA DOPPA 403.033.64 Manual de Usario

30 Septiembre 2024

IKEA ROTHULT 504.179.25 Manual de Usario

30 Septiembre 2024

IKEA DOPPA 803.102.25 Manual de Usario

30 Septiembre 2024

IKEA BLÅSJÖN 005.499.90 Manual de Usario

30 Septiembre 2024

IKEA ROTHULT 004.296.19 Manual de Usario

30 Septiembre 2024

IKEA DOPPA 103.102.24 Manual de Usario

30 Septiembre 2024

IKEA MÖRKRÄDD 503.503.74 Manual de Usario

30 Septiembre 2024