QTX QR10PABT Manual de Usario

QTX Speaker QR10PABT

Lee a continuación 📖 el manual en español para QTX QR10PABT (5 páginas) en la categoría Speaker. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

QR8 BT, QR10PA PA BT

Portable PA

Item ref: 178.8 , 178.839UK 38UK

User Manual

Version 1.2

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

178.8 , 178.839UK User Manual 38UK

Introduction

Thank you for choosing the QRPABT portable PA unit. Please read this manual prior to use to avoid damage to the item.

This versatile portable PA unit is pa d with features in a compact, manageable enclosure and is suitable for a wide cke

array of applications ranging from public address for presentations to outdoor karaoke.

• 15Vdc power adapter with IEC input

• Internal 12V rechargeable battery

• VHF handheld microphone included

• Guitar / Microphone inputs (6.3mm jack)

• Master 2 band EQ and Echo effect for microphones

• Internal USB/SD/FM/BT media player with record function

• Bluetooth pairing with TWS function

• VCV mic override function

• I.R. remote control for media player

• Integral 35mm pole mount

• AUX line input

Please check the contents to ensure that the product has been received in good condition.

• QRPABT portable PA unit

• VHF microphone

• 15Vdc power adaptor and IEC mains lead

• IR Remote control for media player

• User manual

If you find any accessory is missing or the product has arrived with any problems, please contact your retailer at once.

This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will

invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible

replacement or returned demand.

Warning

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do

not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

Safety

Prior to connectin the mains adapter, ensure that the supply voltage is correct and the mains lead is in good condition. g

Avoid ingress of water or particles into the enclosure.

If the internal fuse blows, refer the unit to qualified service personnel

If the VHF microphone transmitter is to be unused for a long period of time, remove the batteries and store for later use.

Placement

Keep the unit out of direct sunlight and away from heat sources.

Place the unit in an upright position during use and storage.

Keep the unit away from moisture or dusty environments.

Cleaning

Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls.

To avoid damage, do not use solvents to clean this equipment.

178.8 , 178.839UK User Manual 38UK

Control panel

Powering up

Your n QRPABT unit may arrive with you with the internal battery charged. Before connecting to the mains with the ew

supplied power adaptor, switch the it on and check the POWER LED (18). If it is green, there is charge in the battery. un

If it is red, then you will need to charge the battery before using away from a mains supply

Connect the QRPABT unit to the mains using the supplied power adaptor. You may otherwise opt to connect the DC input

jack (20) to an external 12- Vdc supply, such as a car battery, or use the internal battery if charged. 15

When not in use but connected to the mains, if the POWER switch (19) is in the

off

position, the internal battery will be

re-charged from the mains supply. This can be observed by the CHARGE LED (18), which will light orange when

charging. When fully charged, the CHARGE LED will change to green.

Note: it is recommended to store the PA unit at an ambient temperature and not with the battery fully discharged.

Initial setup

Turn all VOLUME & ECHO controls down (anti-clockwise) and turn the POWER itch on (the power LED should light). sw

BASS and TREBLE controls should remain pointing vertically (12-o-clock position). Turn up the main VOLUME control part

way and switch VCV off. Your QRPABT unit should now be ready to operate.

VHF Microphone

Ins t ther e supplied AA batteries into the handheld microphone by carefully unscrewing the base and connecting the “+”

and “ ” terminals o- f the battery to the corresponding contacts inside the microphone body, taking care to observe the

correct polarity.

Turn on the VHF receiver (16) and turn the VHF VOL control (6) up (clockwise) part way.

Switch on the wireless mic the rear panel RF LED should light as a result. If the LED on the transmitter lights dimly, –

change the battery. Gradually increase the VHF VOL control, testing the microphone for output through the speaker.

Take care not to incur “feedback” (howling or screeching sound through the speaker) by keeping the microphone a

sensible distance from the speaker and pointing away from the speaker so that it doesn’t

hear

the speaker output.

Turning the ECHO control (3) clockwise introduces a pre-set echo function for singing and special effects. BASS and

TREBLE ( , 5 can be cut by turning anti-clockwise or boosted by turning clockwise. 13 )

When not in use, switch the handheld transmitter off and remove the batteries if not being used for long periods.

USB port

SD/MMC card slot

ECHO level

Wired MIC / guitar volume

TREBLE EQ

VHF Mic volume

LINE IN 2 x RCA

Wired MIC.1 / guitar input 6.3mm jack

Wired MIC.2 input 6.3mm jack

Smart phone / aux input stereo 3.5mm jack

Media player LCD display & IR receiver

Media player mode & transport controls

BASS EQ

Main volume

VCV talkover on/off

VHF wireless receiver on/off

MIX OUT line output 2 x RCA

Battery charge & power LEDs

Power on/off

DC power input jack

Especificaciones del producto

Marca:	QTX
Categoría:	Speaker
Modelo:	QR10PABT
Color del producto:	Wit
Peso.:	934 g
Ancho:	152.4 mm
Profundidad:	76.2 mm
Altura:	246 mm
Indicadores LED:	Stroom
Estándares wifi:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Generación de internet móvil:	5G
Puerto USB:	Nee
red LAN:	Ja
Tipo de fuente de energía:	AC
Cables suministrados:	LAN (RJ-45)
Incluye adaptador de CA:	Ja
Número de puertos Ethernet LAN (RJ-45):	4
A PESAR DE:	Ja
Conexión para adaptador de red:	Ja
Ranura para tarjeta SIM:	Nee
Compatibilidad con módem USB 3G/4G:	Nee
banda wifi:	Tri-band (2.4 GHz / 5 GHz / 5 GHz)
Estándar Wi-Fi:	Wi-Fi 6 (802.11ax)
Velocidad de transferencia de datos WLAN (máx.):	2400 Mbit/s
Velocidad de transferencia de datos WLAN (primera banda):	2400 Mbit/s
Velocidad de transferencia de datos WLAN (segunda banda):	2400 Mbit/s
Tipo de interfaz Ethernet LAN:	Gigabit Ethernet
LAN Ethernet, velocidades de transferencia de datos:	2500 Mbit/s
Estándar de red:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Algoritmos de seguridad compatibles:	WPA, WPA2-PSK, WPA3-PSK
tipo de antena:	Intern
Cantidad de antenas:	8
3G:	Nee
4G:	Nee
Botón de reinicio:	Ja
Adaptador de CA, voltaje de salida:	12 V
Adaptador de CA, potencia de salida:	3.5 A
Red WAN:	Ja
Guía de Instalación Rápida:	Ja
Sistema de suspensión para la pared.:	Ja
Incluyendo tornillos:	Ja
Acceso de invitados:	Ja
WAN ADSL:	Nee
5G:	Nee
Tipo de conexión WAN:	RJ-45
Tipo-producto:	Router om neer te zetten
Número-de-productos-incluidos:	1 stuk(s)
Código del Sistema Armonizado (SA):	85171800
Tecnología MU-MIMO:	Ja
Número de adaptadores incluidos:	1 stuk(s)
Tasa de transferencia de datos WLAN (tercera banda):	1200 Mbit/s
Cable de ethernet:	Ja
Diseño de antena:	Intern
Asignación de VLAN basada en SSID:	Ja