Razor RipStik Brights Manual de Usario

Razor scooter autoequilibrado RipStik Brights

Lee a continuación 📖 el manual en español para Razor RipStik Brights (4 páginas) en la categoría scooter autoequilibrado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

OWNER’S MANUAL

Read and understand this entire manual before allowing

child to use this product! For assistance contact Razor.

DO NOT RETURN TO STORE.

NOTE: Manual illustrations are for demonstration purposes only.

Illustrations may not reﬂ ect exact appearance of actual product.

Speciﬁ cations subject to change without notice.

Please have your 22 character product I.D. code ready before contacting Razor for

warranty assistance and/or replacement parts.

Product I.D. Code: _____________ - ____________ - ____________

Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information

at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service

contact information is listed at the back of this manual.

GENERAL WARNING:

AN IMPORTANT MESSAGE TO PARENTS

This manual contains important safety information. For your child’s safety, it is your responsibility to review this information with your child and make sure that

your child understands all warnings, cautions, instructions and safety topics. We recommend that you periodically review and reinforce the information in this

manual with younger riders and that you are required to inspect and maintain your child’s caster board to insure their safety.

Caster board riding can be a hazardous activity. Caster boards can, and are

intended to move and it is therefore possible to get into dangerous situations

and/or lose control and/or fall off. If such things occur you can be seriously

injured or die.

LIKE ANY OTHER MOVING PRODUCT, USING A CASTER BOARD CAN BE A

DANGEROUS ACTIVITY AND MAY RESULT IN INJURY OR DEATH EVEN WHEN

USED WITH PROPER SAFETY PRECAUTIONS. USE AT YOUR OWN RISK AND

USE COMMON SENSE.

• Always wear proper protective equipment. Elbow and kneepads, long sleeve

shirt, gloves, long pants, shoes, and elbow and kneepads are recommended.

Wear athletic shoes (lace-up shoes with rubber soles). Don’t ride barefoot or

in sandals. Keep shoelaces out of the way of casters and wheels.

• Use the caster board only on smooth, dry, level ground without loose debris,

such as rocks or gravel.

• Never use the caster board at dusk or night or in wet or icy conditions.

• Avoid water, speed bumps, sand, gravel and anything else that could cause

your wheels to stop. When in doubt, avoid the bumps.

• Do not exceed 220 lb (100 kg) total weight on the RipStik®, RipStik DLX and

RipStik G caster boards. Do not exceed 175 lb (79 kg) total weight on the

RipStik Ripster caster board.

• Do not allow children under age eight (8) to use the caster board. Children

under age ten (10) should ride with adult supervision at all times.

• Never ride in trafﬁ c and watch your surroundings for pedestrians, bikes,

skateboard and scooter riders. Use the caster board in areas free from ﬁ xed

or moving hazards, such as poles, hydrants, parked automobiles and trafﬁ c.

• Risk of injury increases as degree of trick difﬁ culty increases. Rider assumes

all risk associated with trick riding activities. Be careful and know your

limitations.

• This product was manufactured for performance and durability but it is

not impervious to damage. Trick riding can over time stress or damage any

product, including the RipStik, and the rider assumes all risks associated

with high-stress activity.

FAILURE TO USE COMMON SENSE AND HEED THESE WARNINGS FURTHER

INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH

APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION.

WARNING: ALWAYS INSPECT THE RIPSTIK PRIOR TO RIDING.

Properly inspecting and maintaining your caster board can reduce the risk of

injury. Always inspect your caster board before riding and regularly maintain it.

WARNING: REGARDING USE OF NON-RAZOR PRODUCTS WITH

YOUR RIPSTIK CASTER BOARD. Your caster board has been built to our design

speciﬁ cations. All the original equipment supplied at the time of sale were

selected on the basis of their compatibility with the frame, casters and all

other parts. Certain after-market products may or may not be compatible with

your RipStik caster board. Consult your retailer or contact us prior to modifying

or replacing any component with a non-factory speciﬁ ed product.

WARNING: CHECK LOCAL LAWS REGARDING CASTER BOARD USE.

Check local laws and regulations to see where and how you may use your

RipStik caster board legally. In many states and local areas caster board riders

may be required BY LAW to wear a helmet. Check local laws and regulations

regarding laws governing helmet use and caster board operation in your area.

WARNING: Aggressive and other stunt-type riding reduce your ability

to maneuver and control your caster board. Take the necessary precautions,

such as wearing appropriate protective gear and practice in a safe area for

stunt riding and free from obstructions.

WARNING: You will see people on TV and videos or maybe even

people you know doing tricks or stunts on a caster board. These are people

who have been practicing a long time and who accept the risks of trick riding

activity. Do not assume that you can attempt to do the same tricks without

great risk.

CHECK BEFORE RIDING

WHEELS AND BEARINGS

CLEANING YOUR RIPSTIK

CASTER BOARD PARTS AND COMPONENTS

NOTE: Your model may differ in appearance from the one depicted above.

Always inspect your caster board’s wheel bearings and other hardware to make sure they are tight before each use.

Under normal circumstances and conditions, RipStik wheels and wheel bearings are maintenance free. Nonetheless, it is the responsibility of the owner or

guardian to periodically inspect the wheels for wear and tear, the axle for proper tightness, and the bearings for side-to-side play and loose parts.

When a wheel or wheel bearing develops play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine RipStik

wheels. Worn wheels/bearings are considered normal wear-and-tear and are not covered by the RipStik Limited Warranty. Wheels other than genuine RipStik

wheels may not be compatible with your RipStik caster board. The use of anything other than genuine Razor replacement parts will void your warranty.

Wipe with a damp cloth to remove dirt and dust.

Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage

or dissolve the plastic components.

Urethane Wheels

360 Degree Inclined Casters

Traction Plates

Kick Tail

Torsion Bar

Concave Deck Platforms

Kick Nose

Product ID Locations:

1. Underneath platform

2. Box - side of UPC (not shown)