Readynet WRT150N Manual de Usario

Readynet Enrutador WRT150N

Lee a continuación 📖 el manual en español para Readynet WRT150N (4 páginas) en la categoría Enrutador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Quick Installation Guide
WRT15
Wireless R
Step 2: Basic Wireless Settings
The pre-configured settings on Figure 3 to the right
will be appropriate for most settings. You might want
to change the Network Name (ESID) and Frequency
(Channel) fields. Click ‘Advanced’ and then
‘WiFi Basic Setup’. To edit the Wireless broadcast ID,
change the “Network Name (SSID)” field and click
the ‘Apply’ button at the bottom of the page.
Click ‘Next’ to move to the final step.
Step 3: Wireless Security Setup
This final step allows you to prevent unauthorized
use of your wireless network by configuring an
encryption method and a pass-phrase that only you
know. Click the ‘Advanced’ link and then the
‘WiFi- Security Setup’. If, for example, you want to
use WPA2-PSK as the Security mode, automatic
cipher, and abcxyz123 as the pass-phrase, your
setting would be like the following image. First set
the ‘Security Mode’ to WPA, then in the WPA
section below, change the ‘Pass Phrase’ to abcxyz123.
D. Setting Up Your Wireless Devices
Your wireless devices (desktop, laptop, iPad,
smart-phone, etc.) must be configured to work with
your wireless router. Each of these devices must have
an internal or external wireless adapter and applicable
drivers. User guides for each of these devices should
have instructions for wireless set up. You will need
the SSID and password you assigned to this wireless
router during router set up. For each wireless device,
access the setup menu, choose the appropriate
SSID from the list of wireless networks, enter your
password, and test the wireless connection.
Figure 3
Figure 4
A. Connect the WRT150N Router to Your Computer
1. To set up your router for the
first time, please connect the
router to your desktop or laptop
computer as shown in the
following diagram. Your
broadband Internet access will
generally be from a cable modem,
ADSL modem, or similar device.
2. After the hardware connections have
been completed, check the status of the LED
Indicators using the following table:
Note: If the LED indicator is not displaying a “Normal Status” as described in the table above, please check the
associated hardware and connections.
Safety Notice
• Thedeviceshouldbeplacedonaathorizontalsurface,orsecuredsafelytoawall.
• Operateequipmentawayfromheatsources.
• Providegoodairventilation.
• Keepawayfromwateranddampareas.
• Disconnectpowerfromthedeviceduringseverethunderstorms.
• UseonlytheincludedACpoweradapter.
• Keeprouteratleast20cmawayfrompeopletoreduceexposuretoradiofrequencyemissions.
B. Configure Your Computer to Operate with the WRT150N Router
1. The network settings of your computer
operating system must be set to automatically
obtain an IP address and to automatically
obtain a DNS Server Address.
2. Type in the Address “http://192.168.11.1”
field of your web browser and press the
“Enter” key. A User Name and Password dialog
box will appear. The default User Name is
“admin” and the default password is “admin”.
Enter the user name and password then click
the “Login” button.
Note: The default wireless IP address for the
wireless router is and the default 192.168.11.1
Subnet Mask 255.255.255.0 is
C. Configure Your WRT150N Router
1. WAN Connection Protocol
The default WAN connection Protocol is
‘Dynamic IP Address’. Continue with this step
only if you need to use a WAN connection
protocol other than ‘Dynamic IP Address’.
To change the WAN connection protocol
click the ‘WAN’ link. Now select the
appropriate WAN connection method.
Finally you might need to enter protocol
specific settings given to you by your ISP.
Click ‘Apply’.
Broadband
Internet
Acess
WAN
POWER
LAN
Desktop PC
Figure 1
Figure 2
LED Indicator Description Normal Status
PWR Power Status Indicator Steady Light
Wifi Wireless Status Indicator Steady Light or Slow Flashing
WPS Wi-Fi Protected Status Indicator OfforFlashingWhenPairing
WAN Broadband Network Status Indicator Steady Light or Slow Flashing
LAN 1-4 LAN Indicator Steady Light or Slow Flashing

Especificaciones del producto

Marca: Readynet
Categoría: Enrutador
Modelo: WRT150N

¿Necesitas ayuda?

Si necesitas ayuda con Readynet WRT150N haz una pregunta a continuación y otros usuarios te responderán


Enrutador Readynet Manuales

Readynet

Readynet WRT300N-DD Manual de Usario

5 Septiembre 2024
Readynet

Readynet WRT300N-RN Manual de Usario

5 Septiembre 2024
Readynet

Readynet WRT150N Manual de Usario

5 Septiembre 2024

Enrutador Manuales

Últimos Enrutador Manuales

Airlive

Airlive WLA-500AP Manual de Usario

27 Octubre 2024
AVM

AVM FRITZ!Box 6810 LTE International Manual de Usario

27 Octubre 2024
Netgear

Netgear Nighthawk X6 AC3200 Tri-Band Manual de Usario

27 Octubre 2024
Tenda

Tenda TX12 Manual de Usario

26 Octubre 2024
HP

HP FlexNetwork MSR958 Manual de Usario

24 Octubre 2024
Linksys

Linksys WAG120N Manual de Usario

20 Octubre 2024
TP Link

TP Link Archer AX55 Manual de Usario

19 Octubre 2024
D-Link

D-Link DSL-2640B Manual de Usario

19 Octubre 2024
Eminent

Eminent EM4030 Manual de Usario

18 Octubre 2024
Eminent

Eminent EM4551 Pro Manual de Usario

18 Octubre 2024