Revo RS-1200AF Manual de Usario

Revo No categorizado RS-1200AF

Lee a continuación 📖 el manual en español para Revo RS-1200AF (7 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
Camera
Track Slider
With Adjustable Feet
RS-600AF
RS- 8 50 A F
RS- 12 00A F
Congratulations on your purchase of the Revo
Camera Track Slider.
Revo’s camera track slider is a sturdy, portable, and
lightweight mini dolly that adds production value to any
video shoot. It provides the ability to get quick, smooth
short-run dolly shots and a variety of tracking shots without
having to carry a full dolly system and track.
The heavy-duty aluminum construction with
precision-engineered rails provide smooth and quiet
panning for the entire length of the rails and ensure
effortless motion for a rig of up to 21 pounds. Individually
adjustable feet and an integrated bull’s-eye bubble level
make leveling the rail easy and ensure that it won’t wobble
if placed on a slightly uneven surface. Threaded mounts
(3/8” and 1/4”-20) on the mounting plate assure
compatibility with most cameras or tripod heads.
The camera track slider is easily assembled without tools.
One or two sets of threaded 1/4”-20 and 3/8” holes on the
rail provide the option of mounting the slider on top of a
single tripod (RS-600AF), or between two tripods
(RS-850AF and RS-1200AF).
Components
Camera sliding rail
Camera mount platform
1/4”-20 mounting
screw
3/8” mounting
screw
2× Adjustable feet
Bubble
level Tension
control knob
Rubber
pads
Leg with
adjustable
feet
Locking
nut
Thumb
screw
Height
adjustment
knob
1/4”-20
threaded
holes (for
adjustable
feet)
Instructions
1
2
Remove the camera mount from the sliding rail by
sliding the camera mount off of the rail. This may
require removing either of the adjustable feet.
Unscrew the mounting screw that will not be used
from the camera mount and set it aside.
Use the 3/8” or 1/4”-20 mounting screw to attach a
camera or tripod head to the mounting plate.
3
5
Note: the mounting screw may need to be tightened with
an Allen key (not included.)
6
7
Attaching a camera or tripod head to the camera
mount
Attaching the legs and adjusting the feet
Align the two posts on the leg with the guide holes on
the rail. Make sure the rubber pads on the frame are
facing in toward the center of the rail.
Tighten the thumb screw until tight and the leg is
secure.
Once one leg has been attached, slide the camera
mounting plate with the tripod head/camera onto the
rail.
Attach the second leg.
Refer to the bubble level on the camera mounting
plate to determine if it is level. Also check to see if the
assembled track slider wobbles.
Loosen the locking nuts on all of the feet.
Rubber Pads
1/4”-20 screw3/8” screw
1
2
4
3

Especificaciones del producto

Marca: Revo
Categoría: No categorizado
Modelo: RS-1200AF

¿Necesitas ayuda?

Si necesitas ayuda con Revo RS-1200AF haz una pregunta a continuación y otros usuarios te responderán




No categorizado Revo Manuales

Revo

Revo EPH-6 Manual de Usario

11 Septiembre 2024
Revo

Revo RS-1200AF Manual de Usario

11 Septiembre 2024
Revo

Revo RBL-S Manual de Usario

11 Septiembre 2024
Revo

Revo RBL-C Manual de Usario

11 Septiembre 2024
Revo

Revo ST-1000 Manual de Usario

11 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales