RIDGID RADF-BLK Manual de Usario
RIDGID
maquina de soldar
RADF-BLK
Lee a continuación 📖 el manual en español para RIDGID RADF-BLK (12 páginas) en la categoría maquina de soldar. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
RADF-BLK
AUTO-
DARKENING
WELDING
HELMET USER
GUIDE OWNERS
MANUAL
RADF-BLK
V1_05.23
ENGLISH
3
WARNING
• Do not use any welding product without appropriate training.
• These products do not provide any protection from respiratory hazards that may result
from welding processes.
• Arc welding can be hazardous. Protect yourself and others from possible serious injury
or death. Keep children away. Read operating / instruction manual before installing,
operating or servicing this product.
• Never use the auto-darkening lens without the inside and outside lens cover properly
installed. Welding spatter will damage the auto-darkening lens and void the warranty.
Welding helmets do not provide unlimited eye, ear and face protection.
Always wear ANSI Z87.1-2003 compliant safety spectacles in addition to any
welding helmet.
Inspect the auto-lens frequently. Immediately replace any scratched, cracked,
or pitted cover lenses or auto-lenses.
Severe burn injuries may result if these welding helmets are used for heavy-
duty overhead welding applications where there is a potential for falling
molten metal.
Do not attempt to use this welding helmet if there are any cracks, or visible damage to the
structure of the helmet and/or auto-darkening filter.
Before First Use
Inspect the welding helmet for the following:
1. The front and inside cover lenses are secure under all the tabs.
2. Damage to the inner and outer cover lenses (e.g.; cracks, scratches, pitted, welding
spatter).
3. Test your shade cartridge prior to welding by directing the front of the cartridge toward
a bright source of light. Then, using your fingers, rapidly cover and uncover the sensors.
The cartridge should darken momentarily as the sensor is exposed. A torch striker can
also be used.
The welding helmet should be adjusted to ensure it is positioned over the eyes and face
to ensure adequate protection.
Adjust Headgear for Proper Fit
1. Headgear tightness – Push down and rotate the knob located on the back of the
headgear left or right.
2. Distance from helmet to face adjustment - Loosen the tension knob on both sides
and slide forward or back to desired position ensuring equal distance on both sides
of the headgear. Note! Make sure both sides are equally positioned for proper
operation.
3. Head size adjustment - Adjust headgear for proper depth on the head for correct
stability and balance.
4. View angle adjustment - Loosen the tension knob on the right side of the helmet, lift
and reposition the lever forward or backward to the desired position.
Especificaciones del producto
| Marca: | RIDGID |
| Categoría: | maquina de soldar |
| Modelo: | RADF-BLK |
¿Necesitas ayuda?
Si necesitas ayuda con RIDGID RADF-BLK haz una pregunta a continuación y otros usuarios te responderán
maquina de soldar RIDGID Manuales
24 Septiembre 2024
24 Septiembre 2024
24 Septiembre 2024
maquina de soldar Manuales
- maquina de soldar Silverline
- maquina de soldar Ozito
- maquina de soldar Gude
- maquina de soldar Stanley
- maquina de soldar Hyundai
- maquina de soldar Ryobi
- maquina de soldar Parkside
- maquina de soldar Einhell
- maquina de soldar Denon
- maquina de soldar Weller
- maquina de soldar Velleman
- maquina de soldar Craftsman
- maquina de soldar Powerplus
- maquina de soldar Telwin
- maquina de soldar Gys
- maquina de soldar Cigweld
- maquina de soldar Toolcraft
- maquina de soldar Mercury
- maquina de soldar Monacor
- maquina de soldar Holzmann
- maquina de soldar Sievert
- maquina de soldar Anova
- maquina de soldar Epcom
- maquina de soldar Lincoln Electric
- maquina de soldar CFH
- maquina de soldar MSW
- maquina de soldar Ersa
- maquina de soldar Portasol
- maquina de soldar Hakko
- maquina de soldar Topex
- maquina de soldar Stamos
Últimos maquina de soldar Manuales
27 Octubre 2024
25 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024