Rocstor Y10E044-B1 Manual de Usario

Rocstor No categorizado Y10E044-B1

Lee a continuación 📖 el manual en español para Rocstor Y10E044-B1 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

2U Horizontal Finger Duct Rack Cable Management Panel

with Cover for 19" Network Rack - Metal - Black

User Manual

Y10E044-B1

Feature Identication

Page 1

1 - Mounting Ears

• Mounting Ears Securely Duct Cable Management

Panel to the rack

2 - Duct Cover

• Removable Duct Cable Management Panel keeps

cables out of the way during installation or upgrades

3 - Cable Management Fingers

• Duct Cable Management Panel allows cables to be inserted and

held in place and is available along the length on both sides.

4 - Duct Cover Latches

• The Duct Cable Management Panel has a latching mechanism on

each corner that keeps the Duct Cover in its position.

5 - Cable Path

• Duct Cable Management Panel allows the inserted cables to run o to the side.

Package included items

• Cable Management Panel (Y10E044-B1) x 1

• M6 Screws x 4

• M6 Cage Nuts x 4

• Plastic Washers x 4

Measurements

Page 2

Dimension Unit : Millimeter (mm)

6.5

88.1

76.2

155 46 155

482.6

465

70.07

Installation

1. Decide where to install the Duct Cable Management Panel by determining the U

Height Number or mounting location on the rack posts.

2. Install four Cage Nuts onto the Cage Nut Holes at the designated U Height Number. Utilize a Cage Nut

Tool or your preferred method of installation, if available, to securely fasten them in place.

3. Align the Mount Ears with the Cage Nuts which were previously inserted on the rack posts.

4. IPlace the Plastic Washers (four in total) onto the Screws (also four in total). Utilize a Phillips Head

Screwdriver to install the Screws and securely fasten the Duct Cable Management Panel to the Mount

ing Posts of the rack.

Procedure

1. Thread the cables through the Cable Management Fingers and the rear Passthrough Holes, arranging

them as desired for organization.

2. Attach and rmly secure the Duct Cover in place by utilizing the four Duct Cover Latches.

Especificaciones del producto

Marca:	Rocstor
Categoría:	No categorizado
Modelo:	Y10E044-B1
Color del producto:	Wit
Peso.:	90 g
Ancho:	58 mm
Profundidad:	43 mm
Altura:	108 mm
Tecnología de conectividad:	Draadloos
Método de montaje:	Plafond/muur
Tipo de fuente de energía:	Batterij/Accu
Batería/duración de la batería:	2 jaar
Tipo de sensor de imagen:	Passieve infraroodsensor (PIR)
Certificados de sostenibilidad:	Federal Communications Commission (FCC), RoHS
Frecuencia:	902-928 MHz
Temperatura de funcionamiento (TT):	0 - 49 °C
Humedad relativa de funcionamiento (VV):	0 - 93 procent
Tipo de Batería:	CR123A
Distancia de detección:	8 m