Roksan Attessa CD Transport Manual de Usario

Roksan Reproductores/grabadores de CD Attessa CD Transport

Lee a continuación 📖 el manual en español para Roksan Attessa CD Transport (26 páginas) en la categoría Reproductores/grabadores de CD. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/26

Owners Manual

Contents

Introduction

Congratulations on your purchase of the Roksan Attessa CD Transport. This CD transport is designed and

manufactured to the highest specication and rigorously tested to reward you with many years of listening

pleasure.

Your Attessa CD Transport is an integral part of your Hi-Fi system. Its correct installation, set-up and

operation will have a signicant inuence on the performance of the entire Hi-Fi installation. Please read

the contents of this manual thoroughly. It will help you to understand your Hi-Fi equipment better and

further enhance your listening pleasure.

Unpacking

Included in the packing of your CD Transport you will nd:

• Mains lead(s) tted with the correct mains power plug for your country.

• One Attessa Remote Control and 2 x AAA batteries

• One high quality digital coaxial cable

• One information pack

After removing these items please retain all packing material and instruction manuals. Correct packing is

necessary for future transportation of your CD Transport.

Warranty

Both the craftsmanship and the performance of this product is covered by the manufacturer’s warranty

against manufacturing defects provided that the product was supplied by an authorised Roksan retailer

under the consumer sale agreement. For the period of cover please refer to the product page on our

website: roksan.com for the product you have purchased.

When purchasing Roksan products, please keep your receipt of purchase safe, as this validates your

warranty.

The words ‘consumer sale’ shall be construed in accordance with section 15 of the supply of goods act

1973. Roksan accepts no responsibility for defects arising from accident, misuse, abuse, wear and tear,

modication or operation outside of that specied within this instruction manual. Neither will responsibility

be accepted for damage or loss occurring during transit to or from the parties claiming under this

guarantee.

This guarantee covers both labour and parts. The liability of Roksan is limited to the cost of repair or

replacement of the defective parts (at the discretion of Roksan) and under no circumstances extends to

consequential losses or damage.

Contents 1

Introduction 1

Unpacking 1

Warranty 1

EU DIRECTIVES 2

AC MAINS SUPPLY 2

Maintenance 2

Location 2

Front Controls 3

Rear Connections 3

Remote 3

Connections 4

Signal 4

Power 4

Operation 4

OLED Display 4

Turning On & Standby 4

Insert Disc 4

Playing a Disc 5

Options Menu 5

Updates 7

Troubleshooting 8

Specications 9

1Attessa CD Transport

roksan.com

EU DIRECTIVES

Roksan declares that the apparatus “Attessa CD Transport” complies with the essential

requirements and other relevant provisions of Directive 1999/5/EC”.

NOTE: This product must be earthed. Please ensure that other equipment connected to it is earthed

according to the manufacturer’s instructions.

AC MAINS SUPPLY

Your Attessa CD Transport is set to operate from a xed supply voltage which is marked on a label next to

the mains input plug. The mains lead supplied with this product has an IEC C13 mains plug which is inserted

into the Mains Input Socket on the unit’s rear panel. The other end is a moulded plug appropriate to that for

your country.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so

that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. If your lead has

been damaged please obtain a complete replacement lead from your dealer.

Should you move to another area where either the mains voltage or the mains plugs are different from

those as supplied with your CD transport, please contact the appointed Roksan distributor for assistance.

Please observe correct mains polarity at all times.

The mains fuses are located on the rear panel below the IEC Mains Input Socket. These must only be

replaced by the fuse type and rating as described on the fuse rating label on the rear panel of the unit.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

Maintenance

After disconnecting the CD Transport from the mains supply, the casing and front panel may be cleaned

with a lightly dampened lint-free cloth. Furniture polish can also be used to clean the CD transport. Avoid

using abrasive substances or solvents.

Location

Your CD Transport should be located in a well ventilated area and kept away from sources of heat, dust,

humidity and direct sunlight.

The CD Transport may be positioned either as a free standing unit or alongside other audio/video

product(s). Never place the CD Transport on other electronic equipment, carpet or any surface likely to

hinder normal ventilation. Never allow liquids or other objects to fall into the unit.

When purchased with an Attessa Amplier or Streamer, we recommend placing the CD Transport below the

Amplier or Streamer

NOTE: This unit contains no user serviceable parts. Do not remove any panels or attempt to service it

yourself. Unauthorised servicing will void the warranty.

Especificaciones del producto

Marca:	Roksan
Categoría:	Reproductores/grabadores de CD
Modelo:	Attessa CD Transport
Color del producto:	Zwart
Peso.:	335 g
Ancho:	83 mm
Profundidad:	60 mm
Altura:	20 mm
Tipo de enchufe:	Type M
Peso del embalaje:	800 g
Ancho del embalaje:	91 mm
Empaquetadura en profundidad:	240 mm
Altura del embalaje:	186 mm
Amable:	AV-zender & ontvanger
Manual de usuario:	Ja
Tecnología de conectividad:	Bedraad
Resolución Máxima:	1440 x 900 Pixels
Incluye adaptador de CA:	Ja
Material:	Aluminium
Resoluciones de gráficos compatibles:	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1440 x 900 (WXGA+)
Certificados de sostenibilidad:	CE
Puertos de entrada VGA (D-Sub):	1
Temperatura de almacenamiento:	-20 - 60 °C
Cumplimiento de la sostenibilidad:	Ja
Corriente de salida:	0.6 A
Puertos de salida RJ-45:	1
Soportes de montaje incluidos:	Ja
Puertos de entrada RJ-45:	1
Patas de goma:	Ja
Puertos de salida VGA (D-Sub):	4
Tensión de funcionamiento:	9 V
Rango-maximo:	150 m
Consumo de energía (típico):	5.4 W
Temperatura de funcionamiento (TT):	0 - 50 °C
Humedad relativa de funcionamiento (VV):	0 - 80 procent
Tipos de cables compatibles:	Cat5e, Cat6