Roku Wi-Fi Setup Manual de Usario
Roku
sistema de audio
Wi-Fi Setup
Lee a continuación 📖 el manual en español para Roku Wi-Fi Setup (14 páginas) en la categoría sistema de audio. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/14
SoundBridge Wi-Fi Setup Instructions
Revision 1.2 | August 31, 2004
Background
This manual is intended for customers who want to set up the SoundBridge for use with a Wi-Fi
network. For complete instructions on using SoundBridge, please read the SoundBridge User Guide,
included with your SoundBridge product or available for download at
www.rokulabs.com
/support in
PDF format.
Why Wi-Fi?
With SoundBridge’s wireless functionality, you can now stream music from computers on your wireless
network to one or more Wi-Fi enabled SoundBridge devices via your wireless access point (WAP). You
can even connect up to five SoundBridges to one iTunes music library and listen to different tunes in
every room of your house.
Wi-Fi setup instructions
1. Verify that your wireless network is up and running on your computer. If you are setting up this
wireless network for the first time, please make sure that you have followed your wireless vendor’s
instruction manual for proper configuration of your wireless access point.
2. Remove both the left and right end caps of SoundBridge by pressing on the two release tabs labeled
“push”. If your SoundBridge is currently powered on, press Standby on your remote and then
disconnect SoundBridge from power by unplugging the AC power cord.
3. Remove the wireless card from its packaging and insert the card into the CF slot on the left side of
SoundBridge. Make sure that the “Roku” label and two small status lights are facing away from you as
you gently push the card into place. (Note: The LED lights will not be illuminated until you power on
SoundBridge). Be careful, forcing the card into position may damage your device.
4. If you had been previously using a wired Ethernet connection, disconnect the cord from the
SoundBridge. Make sure you only have the Wi-Fi card or the wired Ethernet connection attached
to the device– never both at the same time.
5. Start up iTunes or SlimServer on your computer, which is connected to your wireless network.
6. Turn on your Soundbridge by plugging the power cord into the right side of the device, then into the
wall AC outlet. Verify that the screen displays the Roku logo.
7. Upon startup, SoundBridge will attempt to connect to any wireless access point within range that
does not require a password. If your home wireless network requires no password and there are no
other wireless networks in the vicinity (such as those spilling over from a neighbor's house), then your
SoundBridge should automatically connect with no additional configuration, and you will see a list of
music servers on your network to connect to.
However, it’s possible you will need to configure your wireless network as described below:
- If your SoundBridge detects more than one available wireless network, then you will need
to configure SoundBridge’s Wi-Fi settings. Choose "System Configuration" from the main
menu, and then select "Select Wi-Fi SSID & Password." You will then see a list of available
wireless networks. If you see your desired network, select it. If you don't see the desired
network, make sure that your wireless router is within range and that it is functioning
properly.
- Some wireless networks don't "advertise" themselves (a.k.a., “closed networks”). If your
wireless access point is functioning properly but you do not see the network listed, you
should enter your wireless network name by selecting "Specify a wireless network..." (Refer
to your wireless access point’s documentation or utility software if you don’t know the
name of your wireless network.)
- Next, your SoundBridge will ask you whether the wireless connection requires a password.
If you do not have a wireless password, select “No” and skip to the next section. If you do
have a wireless password, select “Yes”. Read the instructions on the screen to determine
what type of wireless password you have on your network. If you are unsure, you may wish
to refer to your wireless router documentation. (See hints below for help finding your
wireless access point’s password.)
- Select “OK” to reboot the unit. Upon restarting, SoundBridge should automatically connect
to the network you have specified.
If the connection is successful, all the available iTunes and/or SlimServer music libraries will be listed on
your screen. Use the up and down arrows on your remote to navigate to your desired library and press
Select to begin browsing your music library..
Troubleshooting
If you have problems connecting to the SoundBridge to your music library via Wi-Fi, please check the
following:
1. Are the LED lights lit up inside the CompactFlash Wi-Fi adapter? If not, your card is not
receiving power. Make sure the SoundBridge is powered on (the LED screen is lit). Remove and
re-insert the CF card with the label facing away from you. It should require gentle pressure to
be inserted into the CF slot.
2. Is SoundBridge within range of your wireless network signal? (Performance varies depending
on wireless network hardware, physical barriers such as walls, and signal interference.)
3. Is your computer on and your wireless access point plugged in?
4. Is iTunes or SlimServer running on your computer?
5. Did you enter your password correctly (if you have one), including case sensitive characters?
Obtaining your wireless access point’s password
Follow these instructions to determine your wireless access point password, and be sure to have a pen
ready to make a note of the case-sensitive password as well as the password type, either hexadecimal
(hex) or ASCII.
Example 1: Apple AirPort (Mac Users)
The Apple Airport is a very popular access point. To see its configuration, open your AirPort Admin
Utility on your Mac (it is in the Utilities folder). Select your AirPort and choose “Configure”.
Especificaciones del producto
| Marca: | Roku |
| Categoría: | sistema de audio |
| Modelo: | Wi-Fi Setup |
¿Necesitas ayuda?
Si necesitas ayuda con Roku Wi-Fi Setup haz una pregunta a continuación y otros usuarios te responderán
sistema de audio Roku Manuales
19 Agosto 2024
sistema de audio Manuales
- sistema de audio Sony
- sistema de audio Philips
- sistema de audio Grundig
- sistema de audio JVC
- sistema de audio Kenwood
- sistema de audio Medion
- sistema de audio Onkyo
- sistema de audio Pioneer
- sistema de audio Toshiba
- sistema de audio Yamaha
- sistema de audio Aiwa
- sistema de audio Akai
- sistema de audio Apple
- sistema de audio Advance Acoustic
- sistema de audio Arcam
- sistema de audio Argon
- sistema de audio OneConcept
- sistema de audio Nedis
- sistema de audio Sonoro
- sistema de audio Sitecom
- sistema de audio Sonos
- sistema de audio Bose
- sistema de audio Muse
- sistema de audio Auna
- sistema de audio Samson
- sistema de audio Tokai
- sistema de audio Ricatech
- sistema de audio Teac
- sistema de audio Peaq
- sistema de audio Zoom
- sistema de audio Dnt
- sistema de audio Revox
- sistema de audio Fusion
- sistema de audio Revo
- sistema de audio Numan
- sistema de audio Elta
- sistema de audio Lynx
- sistema de audio JGC
- sistema de audio Scansonic
- sistema de audio Bang Olufsen
Últimos sistema de audio Manuales
27 Octubre 2024
22 Octubre 2024
20 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
5 Octubre 2024
26 Septiembre 2024