Rolls RS81B Manual de Usario

Rolls reproductor multimedia RS81B

Lee a continuación 📖 el manual en español para Rolls RS81B (4 páginas) en la categoría reproductor multimedia. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
RS81B Quartz PLL Synthesized AM/FM Tuner.
Quick Start Guide
ROLLS CORPORATION
SALT LAKE CITY, UTAH
10/15
www.rolls.com
SERIAL NUMBER
LINE LEVEL XLR OUTPUTS
RS81B
Quartz PLL Synthesized AM/FM RDS Tuner
AM
LOOP ANT
FM ANT
75 L
R
OUTPUT
RIGHT LEFT
MODEL RS81B
www.rolls.com
WARNING: DO NOT EX POSE THIS EQUIPMENT TO RAI N O R MOISTURE.
RISQUE DE CHOC - NE P AS ENLIVER
FUSE T1A 250V
DC 24V
HEADPHONE
HEADPHONE
OUTPUT
CAUTION: TO REDU CE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CA UTI ON
RIS K OF ELEC TRIC
SHOC K D O NOT OPEN
MADE IN TAIWAN
DIRECT
TUNING
M3 / 3 M4 / 4M1 / 1 M2 / 2
M6 M7 / 6 / 7 M8 M9 M10 / 8 / 9 / 10
M5 / 5
0
TA PTY MO / ST MEM. UP BAND
DISP AF DN UPMEMORY SLEEP
+_
POWER INPUT
110-120V 60Hz 45W
220-240V 50Hz 45W
SIGNAL
STRENGHT
Specs:
FM SECTION
Tuning Range: 87.5-108MHz
3 dB Limiting: 12dB
Image Rejection: 53dB
Usable sensitivity mono IHF: 9dB
Selectivity: (-70KHz : +90KHz)
S/N Ratio at 1 mV Mono: 52dB
Stereo: 50dB
THD at 1 mV 40 kHz deviation: 0.18%
Stereo Separation: 28dB
Auto Scan Sensitivity: 23dB
AM Suppression Mod: 52dB
Antenna Input Impedance: 75 Ohms
AM SECTION
Tuning Range: 530 - 1710 kHz (10 kHz increm.)
522 - 1611 kHz (9 kHz increm.)
IF Frequency: 450KHz
Usable Sensitivity: 28dB
Auto Scan Sensitivity: 41dB
S/N Ratio at 5 mV/M: 46dB
6 dB Bandwidth: 7KHz
Image Rejection: 42dB
A.C.A. +/- 9 kHz: 46dB
AGC Action: 43dB
THD at 5mV/M: 0.40%
Antenna Input Impedance: 300 Ohms
Size: 19” x 1.75” x 7”
(48.3 x 4.5 x 12 cm)
Weight: 7.1 lbs. (3.2 kg)
FRONT PANEL DESCRIPTION
www.rolls.com
RS81B
Quartz PLL Synthesized AM/FM RDS Tuner
HEADPHONE
HEADPHONE
OUTPUT
DIRECT
TUNING
M3 / 3 M4 / 4M1 / 1 M2 / 2
M6 M7 / 6 / 7 M8 M9 M10 / 8 / 9 / 10
M5 / 5
0
TA PTY MO / ST MEM. UP BAND
DISP AF DN UPMEMORY SLEEP
SIGNAL
STRENGHT
- MEM. UP: Increments up Presets. If the tuner is stepped beyond the
highest number preset stored, it will “wrap around” and step back to the
lowest numbered preset.
- BAND: Switch for AM or FM (FM 1 / FM 2 / AM)
- Tuning + / - : Increases or Decreases the tuner frequency each time it is
pressed. Press in for 2 seconds for automatic scan searching. After a sta-
tion is received, it will stop automatically and start to play.
- MO/ST: Selects between Stereo and Mono operation (FM mode only).
- DISP: Displays the current RDS information (if available) from the cur-
rent station.
-DIRECT: Press to directly select a radio frequency. For example, to di-
rectly select station107.7, simply press “DIRECT” + number “1077”.
-Headphone Level: Adjusts the signal level of the Headphone Out.
-Headphone Out: 1/8” Tip-Ring-Sleeve stereo jack for connection to ste-
reo headphones. The use of MONO jacks will permanently damage the
RS81B. Make sure you are using a stereo jack.
-Power Switch: Applies power to the RS81B.
- SIGNAL STRENGTH: This is a general signal strength meter. It is not cali-
brated to a specic level. It will indicate the general strength of a signal
coming into the RS81B. Remote Description:
-BAND: Switch for AM or FM
-Press “ BAND ” to select FM 1,FM 2, or AM frequencies.
-Press “TUN+ / TUN-” to select stations. Press and hold for over 2 seconds
enters into automatic scan searching. After a station is received, it will
stop automatically and start to play the station.
-DIRECT: Press to directly select a radio frequency. For example, to di-
rectly select station107.7, simply press “DIRECT” + number “1077”.
-Remote buttons work the same as front panel buttons, refer to the sec-
tion of the manual with the description of the front panel.
REMOTE
Remote Operation:
The included Infrared Remote provides a way to control the RS81B at a
distance from the unit. It must be located in the “line-of-sight”.
Radio Memory Function
-The 30 Radio presets are in 3 sections: FM 1 x 10 / FM 2 x 10 / AM x 10
-First select the channel which wants to be stored
-Press “ MEMORY “
-Press “1 ~ 10” To select the channel number for preset memory.
-Press “ MEMORY “ again to conrm the memory. LCD shows “CH1 ~ 10”.
-Repeat above steps to store more channels. Up to 10 channels can be
stored per section.
Sleep function:
-Press “ SLEEP “
-Maximum set up time is 90 minutes. Increase by 10 minutes for every
press, this is indicated by the LCD display. Sleep set up is cancelled on
nal press (LCD shows “00”).
-When you reach the pre-set time limit, the tuner will automatically stop
playing and go into stand by mode.
-If want to reactivate (power on) the RS81B after it goes into sleep mode,
turn o the main power switch and then turn the power switch on.
-In case you need to cancel the sleeping function during play, keep
pressing “ SLEEP “ until LCD shows “00”. The sleep function is then can-
celled.
SERIAL NUMBER
LINE LEVEL XLR OUTPUTS
AM
LOOP ANT
FM ANT
75 L
R
OUTPUT
RIGHT LEFT
MODEL RS81B
www.rolls.com
WARNING: DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
RISQUE DE CHOC - NE PAS ENLIVER
FUSE T1A 250V
DC 24V
CAU TIO N: TO RED UCE T HE RISK OF ELEC TRIC
SHOCK DO NOT REMOV E COVER (OR BACK). NO
USER SERVICEAB LE PARTS INSIDE. REFER
SERVIC ING T O QUALIF IED SER VICE PER SONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NO T OPEN
MADE IN TAIWAN
+_
POWER INPUT
110-120V 60Hz 45W
220-240V 50Hz 45W
- AC: Three connector IEC power cord. Please connect to a properly
grounded AC outlet.
- Power Select Switch: Selects between 115V (110-120V)/230V (220-
240V) input power. Follow silk screening on unit. This switch MUST be
in the proper setting before the RS81B is turned on. PERMANENT DAM-
AGE CAN BE DONE TO THE RS81B IF THE POWER APPLIED TO THE RS81B
DOES NOT MATCH SWITCH INDICATION.
- FM ANT. 75 Ohm: Connects to the included 75 Ohm FM antenna.
- AM LOOP ANT. 300 Ohm: Connects to the included 300 Ohm AM Loop
antenna.
- RCA OUTPUTS - Line level.
- XLR OUTPUTS - Line level balanced.
- DC 24V: Input for powering the RS81B when main power is not avail-
able. Connect as the silk screen indicates. This must be 24V DC only. Wir-
ing with incorrect polarity or any other voltage than 24V DC will result
in permanent damage to the RS81B and will not be covered under any
warranty.
REAR PANEL DESCRIPTION
Multi path reections:
FM waves, like light waves, travel in a straight direction unless reected
o objects in their path. Because of this, two sets of waves reach your
antenna from the FM station; those that have traveled directly to the
antenna, and those that have been reected o buildings or mountains.
When the antenna receives both kinds of signals, the two interfere with
each other and result in distorted sound and poor separation. This phe-
nomenon is called “multi path reection”. To reduce this problem, select
an antenna with good directivity and place it in the best location with
strong reception.
OPERATION

Especificaciones del producto

Marca: Rolls
Categoría: reproductor multimedia
Modelo: RS81B

¿Necesitas ayuda?

Si necesitas ayuda con Rolls RS81B haz una pregunta a continuación y otros usuarios te responderán


reproductor multimedia Rolls Manuales

Rolls

Rolls RS81B Manual de Usario

9 Septiembre 2024

reproductor multimedia Manuales

Últimos reproductor multimedia Manuales

Fantec

Fantec 16132 Manual de Usario

26 Octubre 2024
Eminent

Eminent EM7167 Manual de Usario

18 Octubre 2024
Google

Google Chromecast Audio Manual de Usario

17 Octubre 2024
Sanyo

Sanyo HMP200 Manual de Usario

14 Octubre 2024
LG

LG LVC-C553 Manual de Usario

8 Octubre 2024
Jensen

Jensen CAR140MW Manual de Usario

8 Octubre 2024
LG

LG RH399M Manual de Usario

8 Octubre 2024
LG

LG VLC8610W3K Manual de Usario

8 Octubre 2024
LG

LG V8814P Manual de Usario

8 Octubre 2024
Dune

Dune HD Base 3D Manual de Usario

7 Octubre 2024