Rotel RDD-1580 Manual de Usario

Rotel sistema de alta fidelidad RDD-1580

Lee a continuación 📖 el manual en español para Rotel RDD-1580 (56 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/56

Owner’s Manual

Manuel de l’utilisateur

Bedienungsanleitung

Manual de Instrucciones

Gebruikershandleiding

Manuale di istruzioni

Instruktionsbok

Руководство владельца

RDD-1580

Digital to Analog Converter

Convertisseur Numérique/Analogique

D/A-Wandler

Procesador Digital de Audio

Digitaal-analoogomzetter

Convertitore Digitale/Analogico

Digital-till-analog-omvandlare

Цифроаналоговый преобразователь (ЦАП)

2RDD-1580 Digital to Analog Converter

Notice

The COMPUTER I/O connection should be handled by authorized

persons only.

WARNING: There are no user serviceable parts inside. Refer all

servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose

the unit to moisture or water. Do not expose the unit to dripping or

splashing. Do not place objects filled with liquids, such as vases, on

the unit. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure,

immediately disconnect the power cord from the wall. Take the unit

to a qualified service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and

on the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

Do not place the unit on a bed, sofa, rug, or similar surface that could

block the ventilation openings. If the unit is placed in a bookcase or

cabinet, there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or

any other appliance that produces heat.

WARNING: The rear panel power cord connector is the mains power

disconnect device. The device must be located in an open area that

allows access to the cord connector.

The unit must be connected to a power supply only of the type

and voltage specified on the rear panel. (USA: 120V/60Hz,

EC: 230V/50Hz)

Rotel products are designed to comply with

international directives on the Restriction of

Hazardous Substances (RoHS) in electrical and

electronic equipment and the disposal of Waste

Electrical and Electronic Equipment (WEEE). The

crossed wheelie bin symbol indicates compliance and

that the products must be appropriately recycled

or processed in accordance with these directives.

Important Safety Instructions

Connect the component to the power outlet only with the supplied

power supply cable or an exact equivalent. Do not modify the

supplied cable. A polarized plug has two blades, with one wider than

the other. A grounding plug has two blades plus a third grounding

prong. These are provided for your safety. Do not defeat grounding

and/or polarization safety provisions. If the supplied plug does not

fit your outlet, please consult an electrician for replacement of the

obsolete outlet. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the

apparatus. In order to completely disconnect the apparatus from the

supply mains, the main plug of the power cordset should be unplugged

from the mains (AC) outlet. The stand-by LED indicator will not be lit

up to show the power cord is unplugged. The disconnect device shall

remain readily operable.

Do not route the power cord where it will be crushed, pinched, bent,

exposed to heat, or damaged in any way. Pay particular attention to the

power cord at the plug and where the cord exits the back of the unit.

The power cord should be unplugged from the wall outlet during a

lightning storm or if the unit is to be left unused for a long period of time.

This apparatus shall be connected to a main socket outlet with a

protective earth connection.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf

system recommended by Rotel. Use caution when

moving the unit in a stand or rack to avoid injury

from a tip-over.

Immediately stop using the component and have it inspected and/

or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged

• Objects have fallen or liquid has been spilled into the unit

• The unit has been exposed to rain

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

The batteries in the remote control should not be exposed to excessive

temperature such as sunshine, fire or other heat sources.

This symbol means that this unit is double insulated.

An earth connection is not required.

Pin Assignments

Balanced Audio (3 pole XLR):

Pin 1: Ground / Screen

Pin 2: In phase / +ve / Hot

Pin 3: Out of phase / -ve / Cold

Figure 1: Controls and Connections

Commandes et Branchements

Bedienelemente und Anschlüsse

Controles y Conexiones

Bedieningselementen en aansluitingen

Controlli e connessioni

Funktioner och anslutningar

Органы управления и соединения

1 2 3

6 7 8 9 0 -

OFF

Figure 2: RR-DD91 Remote Control

Télécommande RR-DD91

Fernbedienung RR-DD91

Mando a Distancia RR-DD91

Afstandsbediening RR-DD91

Telecomando RR-DD91

RR-DD91 fjärrkontroll

Пульт дистанционного

управления RR-DD91

Especificaciones del producto

Marca:	Rotel
Categoría:	sistema de alta fidelidad
Modelo:	RDD-1580
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Touch
Color del producto:	Zwart
Número de niveles de potencia:	15
Pantalla incorporada:	Ja
Temporizador:	Ja
Peso.:	20930 g
Ancho:	900 mm
Profundidad:	510 mm
Altura:	54 mm
Bloqueo infantil:	Ja
Peso del embalaje:	23240 g
Ancho del embalaje:	960 mm
Empaquetadura en profundidad:	555 mm
Altura del embalaje:	170 mm
Tipo de material (arriba):	Gehard glas
Potencia quemador/zona de cocción 2:	3600 W
Potencia quemador/zona de cocción 3:	3600 W
Potencia quemador/zona de cocción 1:	3600 W
Número de quemadores/zonas de cocción:	11 zone(s)
tipo de placa:	Inductiekookplaat zones
Número de quemadores de gas:	0 zone(s)
Número de zonas de cocción electrónicas:	11 zone(s)
Posición de control:	Front / Top front
Carga conectada (eléctrica):	- W
Ancho del compartimento de instalación:	880 mm
Profundidad del compartimento de instalación:	490 mm
Actual:	2 A
Carga conectada (gas):	0 W
Apagado automático:	Ja
Ancho de la placa:	90 cm
Función de impulso:	Ja
Indicador de calor residual:	Ja
Potencia quemador/zona de cocción 4:	3600 W
Fuente de alimentación quemador/zona de cocción 1:	Electrisch
Fuente de alimentación quemador/zona de cocción 2:	Electrisch
Fuente de alimentación quemador/zona de cocción 3:	Electrisch
Fuente de alimentación del quemador/zona de cocción 4:	Electrisch
Posición del quemador/zona de cocción 1:	Links voor
Posición quemador/zona de cocción 2:	Rechts voor
Posición quemador/zona de cocción 3:	Links achter
Posición del quemador/zona de cocción 4:	Rechts achter
Función de parada y arranque:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tamaño de la zona de cocción 2 (AnxPr):	90 x 180 mm
Campana extractora empotrada:	Nee
Tamaño de la zona de cocción 4 (AnxPr):	90 x 180 mm
Tamaño de la zona de cocción 1 (AnxPr):	90 x 180 mm
Tamaño de la zona de cocción 3 (AnxPr):	90 x 180 mm
Fuente de alimentación del quemador/zona de cocción 5:	Electrisch
Fuente de alimentación del quemador/zona de cocción 6:	Electrisch
Posición del quemador/zona de cocción 5:	Centraal
Potencia quemador/zona de cocción 5:	1800 W
Posición quemador/zona de cocción 6:	Centraal
Potencia quemador/zona de cocción 6:	3600 W
Tamaño de la zona de cocción 5 (AnxPr):	92.7 x 200 mm
Tamaño de la zona de cocción 6 (AnxP):	92.7 x 200 mm