Roxio o Burn CD - Roxio Creator Classic Manual de Usario

Roxio Software o Burn CD - Roxio Creator Classic

Lee a continuación 📖 el manual en español para Roxio o Burn CD - Roxio Creator Classic (4 páginas) en la categoría Software. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
How to Burn a CD Using Roxio Creator Classic ©2005 Olin Library Arc: Technology Center
Revised August 17, 2005 Larkin Dennis & Sarah Bombich
Page 1 of 4 Washington University
How to Burn a CD Using Roxio Creator Classic
Start Roxio Creator Classic
1. Click the Start button.
2. Move the mouse cursor to Programs.
3. Click on Creator Classic.
4. The Creator Classic window (Figure 1, below) should pop up.
Create a CD Project
5. Under the tab marked Project (Figure 1), click on the button marked Data.
Figure 1. Project Selector window.
6. Insert a blank rewritable (CD-RW) or recordable CD (CD-R) into the CD-RW drive.
How to Burn a CD Using Roxio Creator Classic ©2005 Olin Library Arc: Technology Center
Revised August 17, 2005 Larkin Dennis & Sarah Bombich
Page 2 of 4 Washington University
7. Use the drop down menu under the tab marked Select Source see (A) in Figure 2 - to
Navigate the source folder of the files you wish to burn.
Figure 2. Data CD Project setup window. A: Drop-down box, B: File selection area, C: Add button (left) and
remove button (right), D: Project files area, E: CD Name, F: Record button, G: Project size estimator.
8. In the file selection area (B), click once on the file that you wish to burn to CD. When you click
on the file, it should become highlighted blue.
9. Press the Add button (C) to place the highlighted file into the project files area (D).
10. Repeat steps (d) through (f) until all the desired files have been added to your project.
11. If you wish to give your CD a name other than the default, click once on the CD name (E) and
once it is highlighted, type in the one that you prefer.
12. Press the record button (F) to start recording your files. After you pressing the record button,
the Record CD Setup window (shown in Figure 3 below) should pop up.
How to Burn a CD Using Roxio Creator Classic ©2005 Olin Library Arc: Technology Center
Revised August 17, 2005 Larkin Dennis & Sarah Bombich
Page 3 of 4 Washington University
Burn the CD
13. You do not need to change the default CD-R drive, Write Speed, or check/uncheck any
options.
14. For maximum compatibility, and the ability to burn additional files to the disc in the future, we
recommend that you leave the Record Method options are they are below, which is the default.
15. After all desired options are selected, press the OK button when you are ready to start
recording. After pressing the OK button, the Record CD Progress window, (shown in Figure 4
on the next page) should pop up. If you have enough space in your blank recording CD, Easy
CD Creator should start its recording process.
Figure 3. Record CD Setup window.
16. The Record CD Progress window (Figure 4) shows the remaining time of each track as well as
the remaining time of the project. When the OK button is grayed out, the disc is still recording.
When the OK button becomes active and the Cancel button is grayed out, the disc is finished
recording.
17. Press OK when the Record CD Progress window shows that the remaining time is 0:00
minutes. The “CD created successfully” message will also be displayed on the Record CD
Progress window when the recording process has completed.

Especificaciones del producto

Marca: Roxio
Categoría: Software
Modelo: o Burn CD - Roxio Creator Classic

¿Necesitas ayuda?

Si necesitas ayuda con Roxio o Burn CD - Roxio Creator Classic haz una pregunta a continuación y otros usuarios te responderán