Russell Hobbs Steamglide 19221 Manual de Usario

Russell Hobbs Strijkijzer Steamglide 19221

Lee a continuación 📖 el manual en español para Russell Hobbs Steamglide 19221 (8 páginas) en la categoría Strijkijzer. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
instructions
£10,000 prize draw
PLUS Free Rewards Gallery
Register online now to
collect your reward
See back for
details
2
Read the instructions, keep them safe, pass them on if you pass the iron on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This iron must only be used by or under the supervision of a responsible adult. Use
and store it out of reach of children.
2 Don’t put the iron in liquid, don’t use it in a bathroom, near water, or
outdoors.
3 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
4 Don’t iron clothing while it’s being worn – you’ll burn or scald the wearer (this is not
a joke – I’ve seen it happen).
5 Don’t touch the soleplate, and keep away from the steam coming from it.
6 Don’t use the iron in the vicinity of children.
7 Use the iron, or set it on its heel, on a stable, level, heat-resistant surface, preferably
an ironing board.
8 Don’t leave the iron unattended while plugged in, or while its standing on the
ironing board. It could be knocked over by you, by a child, or by a pet.
9 Unplug the iron before filling, before cleaning, and after use.
10 Dont fill the iron directly from the tap, use the jug.
11 Don’t fill past , or water may escape in use.max
12 Sit the iron upright when you’re not ironing, and when you store it away.
13 Leave the iron upright to cool before cleaning.
14 Unplug the iron when not in use, before moving and before cleaning. Let it cool
down fully before cleaning and storing away.
15 Don’t fit any attachment or accessory unless we supply it.
16 Dont use the iron for any purpose other than those described in these instructions.
17 Take care not to scratch the soleplate – avoid buttons, zips, etc.
18 Dont use the iron if it’s dropped or damaged, or if it malfunctions or leaks.
3
19 The iron has a protective thermal fuse, which will blow if it overheats. If this happens,
the iron will stop working, and must be returned for repair.
20 If the cable is damaged, return the iron, to avoid hazard.
household use only
U BEFORE USING FOR THE FIRST TIME
Dont worry if the iron smokes a bit at first, it’ll stop as the element cures.
Iron an old piece of cotton fabric, to clean the soleplate.
Press the and buttons 3 or 4 times, to check them out.~
C PREPARATION
1 Check for textile care symbols (i j k l).
2 Iron fabrics needing low temperatures jrst, then those that need medium
temperatures k, and finish with those needing high temperatures .l
X FILLING
3 You may use the iron with tap-water, but if you live in a hard water area, you should
use distilled water (not chemically descaled or softened water).
4 If you buy distilled water, check that it’s marketed as suitable for use in irons.
5 Unplug the iron.
6 Turn the temperature control to , turn the steam control to S (#3).
7 Lift the front of the water inlet cover to open it.
8 Hold the iron with the water inlet cover vertical.
9 Pour slowly, to let the air in the reservoir escape, otherwise you’ll
cause an air lock and the water will overflow.
10 Don’t fill past , or water will escape in use.max
11 Wipe up any spillage.
C SWITCH ON
12 Set the temperature control to , set the steam control to S.
13 Sit the iron on its heel.
14 Put the plug into the power socket (switch the socket on, if it’s switchable).
15 Turn the temperature control to bring the setting you want next to the 9 mark (#3).
16 The light will come on.
17 When the iron reaches the temperature you set, the light will go off. It’ll then cycle
on and off as the thermostat operates to maintain the temperature.
b TEMPERATURE SETTING GUIDE
label marking temperature dot setting
cool – nylon, acrylics, polyester j
warm – wool, polyester mixtures k• •
hot – cotton, linen /l••• max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions
on the label.
C REDUCING TEMPERATURE
18 This takes a bit longer, as the iron has to lose the heat it has built up, so be patient.
Its best to organise your ironing so that you don’t need to reduce the temperature.

Especificaciones del producto

Marca: Russell Hobbs
Categoría: Strijkijzer
Modelo: Steamglide 19221

¿Necesitas ayuda?

Si necesitas ayuda con Russell Hobbs Steamglide 19221 haz una pregunta a continuación y otros usuarios te responderán




Strijkijzer Russell Hobbs Manuales

Strijkijzer Manuales

Últimos Strijkijzer Manuales