Ryobi One+ RC18627 Manual de Usario

Ryobi cargador de bateria One+ RC18627

Lee a continuación 📖 el manual en español para Ryobi One+ RC18627 (12 páginas) en la categoría cargador de bateria. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
ORIGINAL INSTRUCTIONS
ONE+ 6 Port
Charger
RC18627
Important!
This appliance is not intended to be used or cleaned by
persons with reduced physical, sensory or mental capabilities,
or lack of experience or knowledge, unless they have been
given instructions concerning the safe use of the appliance by
a person legally responsible for their safety. They should be
supervised whilst using the appliance. Children shall not use,
clean or play with this appliance, which when not in use should
be secured out of their reach.
3
Safety, performance, and dependability have been given
top priority in the design of your charger.
INTENDED USE
This charger is only intended to charge RYOBI ONE+
battery packs listed in this manual.
The product is only for use indoors in dry conditions.
The product is not intended to charge any other type of
battery or be used as a power supply or any other purpose.
,W VKRXOG QHYHU EH XVHG LQ H[SORVLYH RU LQÀDPPDEOH
environments.
CHARGER SAFETY WARNINGS
Please read and observe these instructions before using the
product. Failure to follow these instructions and warnings
increases the risk of electric shock, fire and explosion.
WARNING
Do not recharge primary cells (non-rechargeable).
WARNING
Mains voltage must correspond with the voltage
VSHFL¿FDWLRQVRQWKHSURGXFW
ŶBefore using the product, check that the product
enclosure, cable and adaptor plug are not damaged.
If damage is found, do not use and follow instruction in
the maintenance section of this manual.
ŶThe product must not be damp, and should never be
used in a damp environment.
ŶThe product is for indoor use only.
ŶDo not use the product if it has suffered any heavy
shock or jolting, or is damaged in any other way.
ŶDo not conduct charging in a position which may
become exposed to sunlight or other heat source.
Recommended temperature range at charging vicinity
is 10° to 25° C.
ŶDue to the heat generated during charging, the product
should not be operated on a combustible surface.
ŶDo not conduct charging operations in the vicinity
of flammable materials. Example: Cloth, packaging
materials, paint, spray paint or aerosols, lubricant,
thinners, petrol containers, gas containers or gas
appliances.
ŶDo not cover any ventilating slots and provide adequate
ventilation during operation.
ŶNever modify, disassemble or attempt to repair the
product yourself.
ŶDo not allow the charger or batteries to become
contaminated with any material which could be
conductive. Example: Metal particles from grinding,
cutting or machining processes.
ŶRemove the plug of the product from the power socket
when it is not in use or when cleaning it.
ŶOnly use extension cable that is approved and in good
condition.
ŶProtect battery contacts to avoid a short circuit caused
by metallic objects which could cause a fire or explosion!
ŶDo not charge batteries which show signs they have
leaked electrolyte. Dispose of them properly.
ŶNever charge a damaged battery pack. If damaged,
replace immediately.
ŶIf the battery is not going to be used for a while, remove
the charger plug from the power socket and take the
battery off the product.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING
7R UHGXFH WKH ULVN RI ¿UH SHUVRQDO LQMXU\ DQG SURGXFW
damage due to a short circuit, never immerse your
WRRO EDWWHU\ SDFN RU FKDUJHU LQ ÀXLG RU DOORZ D ÀXLG WR
ÀRZ LQVLGH WKHP &RUURVLYH RU FRQGXFWLYH ÀXLGV VXFK
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.
KNOW YOUR PRODUCT
See page 6.
1. LED indicator
2. Battery port
3. Key hole hanger
4. Battery port number
OPERATION
CHARGING THE BATTERY PACK
Battery packs are shipped in a low charge condition to
prevent possible problems. Therefore, you should charge
WKHPEHIRUH¿UVWXVH,IWKHFKDUJHUGRHVQRWFKDUJH\RXU
battery pack under normal circumstances, return both the
battery pack and charger to your nearest repair center for
electrical check.
NOTE: When multiple battery packs are connected to the
charger, the battery packs are charged one at a time in the
order of battery port numbers.
Make sure the power supply is normal household voltage,

Especificaciones del producto

Marca: Ryobi
Categoría: cargador de bateria
Modelo: One+ RC18627

¿Necesitas ayuda?

Si necesitas ayuda con Ryobi One+ RC18627 haz una pregunta a continuación y otros usuarios te responderán


cargador de bateria Ryobi Manuales

Ryobi

Ryobi One+ RC18627 Manual de Usario

21 Octubre 2024
Ryobi

Ryobi RY36C17A Manual de Usario

29 Julio 2024

cargador de bateria Manuales

Últimos cargador de bateria Manuales

Nitecore

Nitecore UHX1 PRO Manual de Usario

27 Octubre 2024
Nitecore

Nitecore EMR05 TAC Manual de Usario

26 Octubre 2024
Bosch

Bosch GAA12V-21N Manual de Usario

24 Octubre 2024
Panasonic

Panasonic CF-VCB331 Manual de Usario

24 Octubre 2024
Alecto

Alecto BL-179 Manual de Usario

19 Octubre 2024
Graupner

Graupner Ultramat 12 Manual de Usario

16 Octubre 2024
Graupner

Graupner ULTRA DUO PLUS 30 Manual de Usario

16 Octubre 2024
MSW

MSW S-CHARGER-20A.2 Manual de Usario

15 Octubre 2024
MSW

MSW S-CHARGER-10A.2 Manual de Usario

15 Octubre 2024
Intenso

Intenso Powerbank 10400 Manual de Usario

14 Octubre 2024