Ryobi RP4030 Manual de Usario
Ryobi
Termómetro ambiental
RP4030
Lee a continuación 📖 el manual en español para Ryobi RP4030 (8 páginas) en la categoría Termómetro ambiental. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
OPERATOR’S MANUAL
Tek4 Lithium-ion ®
4V Professional Infrared Thermometer
RP4030
WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to
follow all instructions listed below, may result in electric shock,
fire and/or serious personal injury.
CAUTION:
Use of controls or adjustments or perfor mance of pro-
cedures other than those specified herein may result in
hazardous radiation exposure.
The laser guide radiation used in the thermometer is
Class II with < 1mW and 630-670nm wavelengths.
Avoid direct eye exposure when using the laser and do
not project the laser beam directly into the eyes of oth-
ers. Serious eye injury could result.
Do not remove or deface any prod uct labels. Removing
product labels increases the risk of exposure to laser radia-
tion.
Do not place the instrument in a position that may cause
anyone to stare into the laser beam intentionally or
unintention ally. Serious eye injury could result.
Do not operate the thermometer around children or
allow children to operate the tool. Serious eye injury could
result.
Do not use for medical evaluations or to measure body
temperature. This product is meant for household use only.
Do not use this product as a precision thermometer.
Do not operate the instrument in com bustible areas
such as in the presence of flammable liquids, gasses,
or dust.
Always ensure the laser beam is aimed at a surface
without reflective proper ties. Shiny reflective materials
are not suitable for laser use.
The laser shall be used and maintained in accordance
with the manufacturer’s instructions.
Neveraimthebeamatapersonorobjectotherthanthe
target surface.
This product should not be used without the battery cap
installed.
Handle the instrument with care. Treat it as you would any
other optical device such as a camera or binoculars.
Avoid exposing the instrument to shock, continuous
vibration, or extreme hot or cold temperatures. Dam-
age to the product and/or serious injury to the user could
result.
Use battery only with charger listed.
MODEL BATTERY PACK CHARGER
RP4030 AP4001 AP4700, AP4500
Do not use on a ladder or unstable support. Stable footing
on a solid surface enables better control of the product in
unexpected situations.
Do not use the product if the trigger does not turn it on
and off.
IMPORTANT SAFETY
INSTRUCTIONS
Use the product in accordance with these instructions
and in the manner intended for the product, taking into
account the working conditions and the work to be
performed. Use of the product for operations different from
those intended could result in a hazardous situation.
Recharge battery only with the charger specified by
the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use battery products only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
When servicing a battery product, use only identical
replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or failure
to follow Maintenance instructions may create a risk of shock
or injury.
Know your battery product. Read operator’s manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this power
tool. Following this rule will reduce the risk of electric shock,
fire, or serious injury.
Do not place battery products or their batteries near fire
or heat. This will reduce the risk of explosion and possibly
injury.
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
For best results, your battery tool should be charged in
a location where the temperature is more than 50°F but
less than 94°F. To reduce the risk of serious personal injury,
do not store outside or in vehicles.
Under extreme usage or temperature conditions, battery
leakage may occur. If liquid comes in contact with your
skin, wash immediately with soap and water. If liquid
gets into your eyes, flush them with clean water for at
least 10 minutes, then seek immediate medical attention.
Following this rule will reduce the risk of serious personal
injury.
Save these instructions. Refer to them frequently and use
them to instruct others who may use this product. If you
loan someone this instrument, loan them these instructions
also.
SYMBOLS
SYMBOLS
The following signal words and meanings are intended to
explain the levels of risk associated with the product.
SYMBOL / SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situ-
ation, which, if not avoided, will result in
death or serious injury.
WARNING:
Indicates a potentially hazardous situa-
tion, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situ-
ation, which, if not avoided, may result
in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates
a situation that may result in property
damage.
FEATURES
PRODUCT SPECIFICATIONS
Battery Pack Voltage ................................................... 4 V DC
Laser Certifications .......................
Class II<1mW, 630-670 Nm
IR Display Resolution .................................................. 0.1ºC/ºF
Ambient Operating Temperature Range.............30
º
to 122
º
F
Response Time .............................................................0.5 sec
Distance to Spot Ratio .......................................................10:1
Emissivity ...........................................................Preset to 0.95
Data Memory ..........................................................10 readings
KNOW YOUR INFRARED THERMOMETER
See Figure 1, page 2.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual. Before
use of this product, familiarize yourself with all operating features
and safety rules.
10:1 SPOT/DISTANCE RATIO
See Figure 3.
DATA MEMORY
Up to 10 temperature readings may be stored in memory.
FAHRENHEIT AND CELSIUS READINGS
Your infrared thermometer can be switched from F readings º º t o C
by pressing the ºC/Fº key. Accurately measures temperatures
ranging from -4ºF to 590ºF (-20 ºC to 310 ºC).
LCD DISPLAY
The LCD display features a backlight that remains on while you
are taking measurements.
LASER POINTER
The laser pointer will show you the center of the target area
that is being read.
LOW BATTERY INDICATOR
The low battery indicator shows when the battery should be
replaced or recharged.
Some of the following symbols may be used on this product.
Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and
safer.
SYMBOL / NAME DESIGNATION/
EXPLANATION
Safety
Alert
Indicates a potential personal
injury hazard.
Read The
Operator’s
Manual
To reduce the risk of injury,
user must read and understand
operator’s manual before using
this product.
VVolt Voltage
Hz Hertz Frequency (cycles per second)
WWatt Power
Direct
Current
Type or a characteristic of cur-
rent
Laser
Exposure
Laser radiation - avoid direct eye
exposure.
Li - Io n
Recycle
Symbols
This product uses lithium-ion (Li-
ion) batteries. Local, state or fed-
eral laws may prohibit disposal of
batteries in ordinary trash. Con-
sult your local waste authority for
information regarding available
recycling and/or disposal op-
tions.
2
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Thermometer
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
ASSEMBLY OPERATION OPERATION
WARNING:
Do not attempt to modify this product or create accessories
not recommended for use with this product. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not allow familiarity with products to make you careless.
Remember that a careless fraction of a second is sufficient
to inflict serious injury.
WARNING:
Always remove battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when
not in use.
APPLICATIONS
Non-contact temperature measurement for electricians,
facility maintenance personnel and remodeling contrac-
tors
Check the temperature of air vents and other HVAC ap-
plications
Check temperatures of exterior/interior surfaces
Automotive applications
INSTALLING/REMOVING BATTERY PACK
See Figure 2, page 2.
To install the battery pack:
Unscrew the battery compartment cap.
Do not remove the gasket inside the cap.NOTE:
Insert the battery pack in the direction shown. Make sure
the raised rib on the battery pack aligns with the groove
in the battery compartment.
Place the cap over the battery pack and push down
until the cap meets the threads at the end of the battery
compartment.
Screw the cap on securely.
To remove the battery pack:
Unscrew the cap. The battery pack will disconnect and
be easy to remove.
Do not attempt to use this product if the battery cap is not
securely closed.
TAKING TEMPERATURE READINGS
See Figure 3, page 2.
For the most accurate readings, follow these hints:
NOTE: Temperature readings can only be measured on a
target surface.
Place the unit less than two (2) feet from the item you wish to
read.
A - LCD Display (afficheur ACL, pantalla de cristal líquido)
B - RECORD button (bouton RECORD [(Enregistrer)], botón de Grabación)
C - PLAY button (bouton Play [Lecture], botón de Reproducción )
D - Min/max button (bouton min/max [Minimum/maximum], botón min/max [mínimo/máximo])
E - ºC/ºF button (bouton ºC/ºF, botón ºC/ºF)
F - HOLD indicator (icône HOLD [Retenue], ícono HOLD [retención])
G - LASER indicator (icône Laser, ícono Laser)
H - LOG indicator (icône LOG [Journal], ícono LOG [registro])
A - Laser beam (
faisceau laser
,
rayo láser
)
B - Target area (zone ciblée, área objetivo)
C - Trigger (gâchette, gatillo)
Fig. 2
Fig. 4
Fig. 3
A - Battery compartment
(compartiment de piles,
compartimiento de las baterías)
B - Battery pack (bloc-pile, paquete
de baterías)
C - Battery cap (couvercle du piles,
cubierta de baterías)
HOLD
73.9
f
80
MIN
MAX
C/
F
m
/
m
a
x
i
n
LOG
A
h
GF
CE
BD
A - Trigger (gâchette, gatillo)
B - Target measuring beam (
faisceau de mesure
,
rayo medidor
)
C - Laser aperture (ouverture laser, ouverture laser)
Fig. 1
A
B
C
Avoid Exposure. Radiation is emitted from this aperture.
Éviter toute exposition. Le rayonnement est émis de cette ouverture.
Evite la exposición. Se emite radiación a través de esta abertura. Complies with / Convient aux pièces / Cumple con partes 21CFR parts 1040.10 & 1040.11
LASER RADIATION : AVOID DIRECT EYE EXPOSURE
RAYONNEMENT LASER : ÉVITER LE CONTACT OCULAIRE DIRECT
RADIACIÓN LÁSER: EVITE LA EXPOSICIÓN DIRECTA DE LOS OJOS
MAXIMUM OUTPUT: <1 mW • WAVELENGTH : 630-670nm • CLASS II LASER PRODUCT
PUISSANCE MAX. : <1 mW • LONGUEUR D’ONDE : 630-670nm • PRODUIT LASER DE CLASSE II
POTENCIA MÁX. <1 mW • LONG. ONDA: 630-670nm • APARATO LÁSER CLASE II
DANGER • DANGER • PELIGRO
RP4030
B
A
C
2 in.
@20 in.
4 in.
@40 in.
100 mm
@ 1000 mm 50 mm
@ 500 mm
�
�
�
�
A
C
BDISTANCE TO SPOT RATIO (D:S)
RéSOluTION OPTIquE (D:S)
RElACIóN DE DISTANCIA Al OBjETIvO (D:S)
D
S
3
OPERATION
MAINTENANCE
MAINTENANCE
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 during maintenance. If operation is
dusty, also wear a dust mask.
WARNING:
To avoid serious personal injury, always remove the battery
pack from the product when cleaning or performing any
maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths
to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic
parts. Chemicals can damage, weaken or destroy plastic
which may result in serious personal injury.
BATTERIES
This product will accept Ryobi 4 V lithium-ion batteries. Length
of service from each charging will depend on the type of work
you are doing.
Lithium-ion batteries have been designed to provide maximum
trouble-free life. However, like all batteries, they will eventually
wear out. Do not disassemble battery pack and attempt to
replace the batteries. Handling of these batteries, especially
when wearing rings and jewelry, could result in a serious
burn.
To obtain the longest possible battery life, we suggest the
following:
Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 80°F
and away from moisture.
Store battery packs in a 30%-50% charged condition.
Every six months of storage, charge the pack as normal.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
WARNING:
Upon removal, cover the battery pack’s terminals with heavy-
duty adhesive tape. Do not attempt to destroy or disassemble
battery pack or remove any of its components. Lithium-ion
batteries must be recycled or disposed of properly. Also,
never touch both terminals with metal objects and/or body
parts as short circuit may result. Keep away from children.
Failure to comply with these warnings could result in fire
and/or serious injury.
WARRANTY
AVERTISSEMENT :
LIRE TOUTES LES INSTRUCTIONS. Le non-respect de
toutes les instructions ci-dessous peut entraîner un choc
électrique, un incendie et/ou des blessures graves.
ATTENTION :
L’usage de contrôles, de réglages ou de procédures ne
figurant pas dans ce manuel peut entraîner l’exposition à
des rayonnements dangereux.
Le rayonnement du guide laser utilisé sur le niveau est
de classe IIIa, avec des longueurs d’onde de < 1mW and
630-670nm.
Éviter le contact oculaire direct avec le laser et ne pas
projeter le rayon laser dans les yeux de quiconque. Cela
pourrait causer des lésions oculaires graves.
Ne pas retirer ou altérer les autocollants apposés sur
le produit. Cela accroîtrait le risque d’exposition aux
rayonnements laser.
Ne pas placer de l’instrument à un endroit où quiconque
pourrait regarder directement dans le faisceau laser,
volontairement ou accidentellement. Cela pourrait causer
des lésions oculaires graves.
Ne pas utiliser le appareil de thermomètre à proximité
d’enfants ou laisser des enfants l’utiliser. Cela pourrait
causer des lé sions oculaires graves.
Nepasutiliserpourdesexamensmédicauxoupourprendre
la température corporelle. Ce produit est conçu pourun usage
domestique seulement.
Ne pas utiliser ce produit comme thermomètre de
précision.
Ne pas utiliser de l’instrument dans des atmosphères
explosives, par exemple en présence de liquides, gaz ou
poussières inflammables.
Toujours s’assurer que le faisceau laser est dirigé
vers une pièce solide, ne présentant pas de surfaces
réfléchissantes. Les matériaux brillants réfléchissants ne
sont pas compatibles avec l’utilisation du laser.
Le laser coit être utilisé et entretenu conformément aux
instructions du fabricant.
Nejamaisdirigerlefaisceaulaserversunepersonneou
un objet autre que la surface ciblée peut être lue.
Ce produit ne doit pas être utilisé sans le capuchon de
la pile.
Manipuler de l’instrument avec précaution. Le traiter
comme tout autre appareil optique, tel qu’un appareil photo
ou des jumelles.
Éviter d’exposer de l’instrument à des chocs, des
vibrations continues ou des températures extrêmement
basses ou élevées. Ceci pourrait causer des dommages à
l’outil et/ou des lésions oculaires graves.
Ne recharger qu’avec l’appareil indiqué.
MODÈLE PILE CHARGEUR
RP4030 AP4001 AP4700, AP4500
Ne pas utiliser produit sur une échelle ou un support
instable. Une bonne tenue et un bon équilibre permettent de
mieux contrôler produit en cas de situation imprévue.
Ne pas utiliser le produit si le commutateur ne permet pas
de le mettre en marche ou de l’arrêter.
Utiliser le produit conformément à ces instrutions pour
les applications pour lesquelles ils sont conçus, en tenant
compte des conditions et du type de travail à exécuter.
L’usage d’un outil motorisé pour des applications pour
lesquelles il n’est pas conçu peut être dangereux.
Ne recharger qu’avec l’appareil spécifié par le fabricant.
Un chargeur approprié pour un type de batterie peut créer
un risque d’incendie s’il est utilisé avec un autre type de
batterie.
Utiliser exclusivement le bloc-pile spécifiquement indiqué
pour le produit. L’usage de tout autre bloc peut créer un risque
de blessures et d’incendie.
MANUEL D’UTILISATION
Tek4 4V Thermomètre à infrarouges de ®
qualité professionnelle
RP4030
INSTRUCTIONS IMPORTANTES
CONCERNANT LA SÉCURITÉ
Accuracy of readings of 50º-86ºF (10º -30ºC) is plus ( + )
or minus ( - ) 3°F (1.5°C) of the actual temperature. All other
readings are +/- 1.5% of the reading.
Readings at distances greater than two (2) feet may be
less accurate due to external light sources, surrounding air
temperature and reading of larger surface areas not intended
to be measured.
Cleaner surfaces will give more accurate readings.
To take a temperature reading:
Press and/or hold the trigger to scan the surface temperature
of a target object.
The backlight and laser icon will come on.
The laser pointer indicates the center of the circular area being
scanned for reference only.
The surface temperature and maximum temperature readings
are displayed.
When the trigger is released, the laser will turn off. The HOLD
icon will stay on.
The backlight will turn itself off after a period of no use. Press-
ing any button will turn the backlight on again when the LCD
is still in use.
To take a maximum/minimum reading:
Hold the trigger to scan the surface temperature of a target
object.
Move the laser beam from one target point to another desired
target point while holding the trigger.
Release the trigger. The maximum temperature is displayed.
To display the minimum reading, press the min/max button.
If desired, record the minimum/maximum reading.
USING THE FUNCTION BUTTONS
See Figure 4, page 2.
To store a reading into memory, press the Record button
( ). The LOG icon will light up to show the reading has been
logged into memory. Up to 10 readings can be recorded.
If the memory is full, the oldest reading will be deleted NOTE:
to add the new reading.
To recall a reading stored in memory, press the
Play button
( ). Pressing the button repeatedly will scroll through all
10 readings.
To clear the memory, press and hold Record and Play together
for 4 seconds.
The min/max button switches the display from the minimum
reading to the maximum reading.
To switch back and forth from Celsius to Fahrenheit, press the
ºC/Fº button. Recorded temperatures can be read as both
Celsius and Fahrenheit.
LIMITED TWO YEAR WARRANTY AND 30 DAY EXCHANGE
POLICY
30-DAY EXCHANGE POLICY: During the first 30 days after date of
purchasing this product, you may either request service under this
warranty or you may exchange it by returning it with proof of purchase
and all original equipment packaged with the original product to the
dealer from which it was purchased. The replacement product will
be covered by the limited warranty for the balance of the two year
period from the date of the original purchase.
LIMITED TWO YEAR WARRANTY. This product is warranted against
all defects in workmanship or materials for a period of two years
from the date of purchase. The warranty on any accessories for this
product, excluding batteries, is limited to 90 days from the date the
accessory is purchased. To obtain warranty service, call Customer
Service at 1-800-525-2579 for warranty return instructions. The prod-
uct must be properly packaged and returned with all equipment that
was included with the original product,. When you request warranty
service, you must also present proof of purchase documentation,
which includes the date of purchase (for example, a receipt or a bill
of sale). Defective products returned within the warranty period will
be repaired or replaced, at our option, free of charge, within ninety
(90) days or less. The cost of shipping the product to us is your re-
sponsibility. This warranty only covers defects arising under normal
usage and does not cover any malfunction, failure or defects resulting
from misuse, abuse, neglect, alteration, modification or unauthorized
repairs. It applies only to the original purchaser at retail, and may not
be transferred. One World Technologies, Inc. makes no warranties,
representations or promises as to the quality or performance of this
product other than those specifically stated in this warranty. Any
implied warranties granted under state law, including warranties of
merchantability or fitness for a particular purpose, are limited to two
years from the date of purchase. One World Technologies, Inc. is not
responsible for direct, indirect, or incidental damages Some states
do not allow limitations on how long an implied warranty lasts, or the
exclusion or limitation of incidental or consequential damages, so the
above limitations and exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights
which vary from state to state.
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
Phone 1-800-525-2579
États-Unis, Téléphone 1-800-525-2579
USA, Teléfono 1-800-525-2579
www.ryobitools.com
Français
Especificaciones del producto
| Marca: | Ryobi |
| Categoría: | Termómetro ambiental |
| Modelo: | RP4030 |
¿Necesitas ayuda?
Si necesitas ayuda con Ryobi RP4030 haz una pregunta a continuación y otros usuarios te responderán
Termómetro ambiental Ryobi Manuales
11 Agosto 2024
Termómetro ambiental Manuales
- Termómetro ambiental Pyle
- Termómetro ambiental Extech
- Termómetro ambiental Hama
- Termómetro ambiental Velleman
- Termómetro ambiental La Crosse Technology
- Termómetro ambiental AcuRite
- Termómetro ambiental TFA
- Termómetro ambiental Reer
- Termómetro ambiental Oregon Scientific
- Termómetro ambiental P3 International
Últimos Termómetro ambiental Manuales
22 Septiembre 2024
16 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
25 Agosto 2024
20 Agosto 2024
20 Agosto 2024