Ryobi RPT400 Manual de Usario
Ryobi
cortasetos
RPT400
Lee a continuación 📖 el manual en español para Ryobi RPT400 (10 páginas) en la categoría cortasetos. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/10
RPT400
ELECTRIC POLE HEDGE TRIMMER
OPERATOR’S MANUAL (Original Instructions)
Important! It is essential that you read the instructions in this manual before
operating this machine. Subject to technical modications.
1
ENGLISH (Original Instructions)
Your Pole hedge trimmer has been engineered and
manufactured to Ryobi's high standard for dependability,
ease of operation, and operator safety. When properly
cared for, it will give you years of rugged, trouble-free
performance.
Thank you for buying a Ryobi product.
GENERAL SAFETY RULES
WARNING
Read and understand all instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and serious injury.
The term “power tool” in the warnings refer to
your mains-operated corded power tool.
INTENDED USE: This product designed for use by one
operator,for trimming hedges and bushes utilising one or
more liner reciprocating cutter blades,but not intends for
wood cutting.
WORK AREA SAFETY
n Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
n Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite
the dust or fumes.
n Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
n Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
n Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
n Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
n Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
n When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
n If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply, the tripping current of 30mA or less.
PERSONAL SAFETY
n Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
n Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
n Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your nger on the switch or plugging in power tools
that have the switch on invites accidents.
n Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
n Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
n Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
n If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust-related hazards.
POWER TOOL USE AND CARE
n Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
n Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
n Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventative safety measures
reduce the risk of starting the power tool accidentally.
n Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
2
ENGLISH (Original Instructions)
tools are dangerous in the hands of untrained users.
n Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
n Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
GENERAL SAFETY RULES
n Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
SERVICE
n Have your power tool serviced by a qualied repair
person using only genuine replacement parts.
This will ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY INSTRUCTION
nTHIS MACHINE CAN CAUSE SERIOUS INJURIES.
Read the instructions carefully for the correct handing,
preparation, maintenance, starting and stopping of the
machine. Be familiar with all controls and the proper
use of the machine;
n Never allow children to use the machine;
n Beware of overhead power lines;
n Avoid operating while people, especially children are
nearby;
n Dress properly! Do not wear loose clothing or jewellery
which can be caught in moving parts. Use of sturdy
gloves, non-skid footwear, and safety glasses is
recommended;
n Stop the engine or disconnect from mains before:
-Cleaning or when clearing a blockage;
-Checking, maintenance or working on the machine;
-When adjusting the working position of the cutting
device.
n Where the hedge trimmer is provided with adjustments
to the angle of the cutting device and / or the length
of the handle shaft never hold the cutter blades when
making adjustments to the working position of the
cutting device. Always ensure that the cutting device
is correctly located in a designated working position
before starting the engine or plugging the machine in
to the mains;
n While operating the machine be always sure of a safe
and secure operating position especially when using
steps or a ladder;
n Do not attempt to repair the machine unless you are
qualied to do so;
n Do not operate the machine with a damaged or
excessively worn cutting device;
n A warning of noise level and the need for ear protection;
n Always ensure all handles and guards are tted when
using the machine. Never attempt to use an incomplete
machine or one tted with an unauthorised modication;
n Where a hedge trimmer is provided with more than one
handle always use two hands to operate it;
n When transporting or storing the machine always t the
cutting device guard;
n Instructions for correct use and an indication that the
machine should not be used for any other purpose;
n Know how to stop the machine quickly in an emergency;
n Always be aware of your surroundings and stay alert
for possible hazards that you may not hear due to the
noise of the machine.
n Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure
the unit is unplugged and the switch is off when
clearing jammed material. A moment of inattention
while operating the hedge trimmer may result in serious
personal injury.
n Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer always t the cutting device
cover. Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
n Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
WARNING :
The vibration emission during actual use of
power tool can differ from the declared total
value depending on the ways in which the tool is
used; and of the need to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions of
use.
Especificaciones del producto
| Marca: | Ryobi |
| Categoría: | cortasetos |
| Modelo: | RPT400 |
¿Necesitas ayuda?
Si necesitas ayuda con Ryobi RPT400 haz una pregunta a continuación y otros usuarios te responderán
cortasetos Ryobi Manuales
15 Octubre 2024
5 Octubre 2024
29 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
12 Septiembre 2024
3 Agosto 2024
29 Julio 2024
20 Julio 2024
cortasetos Manuales
- cortasetos Bosch
- cortasetos DeWalt
- cortasetos WOLF-Garten
- cortasetos Al-ko
- cortasetos Ferm
- cortasetos Ozito
- cortasetos Gude
- cortasetos Makita
- cortasetos Hitachi
- cortasetos Black And Decker
- cortasetos Vonroc
- cortasetos Skil
- cortasetos Hyundai
- cortasetos Hanseatic
- cortasetos Florabest
- cortasetos Metabo
- cortasetos Worx
- cortasetos Meec Tools
- cortasetos Milwaukee
- cortasetos Hikoki
- cortasetos Sun Joe
- cortasetos Cramer
- cortasetos Sovereign
- cortasetos Einhell
- cortasetos Gardena
- cortasetos Baumr-AG
- cortasetos Ferrex
- cortasetos Husqvarna
- cortasetos Tanaka
- cortasetos Craftsman
- cortasetos Powerplus
- cortasetos Stiga
- cortasetos Cotech
- cortasetos Trotec
- cortasetos Topcraft
- cortasetos Texas
- cortasetos Spear & Jackson
- cortasetos Atika
- cortasetos Honda
- cortasetos Sterwins
- cortasetos Stihl
- cortasetos Dolmar
- cortasetos Shindaiwa
- cortasetos Powerworks
- cortasetos Zipper
- cortasetos Fieldmann
- cortasetos Varo
- cortasetos Pattfield
- cortasetos Fuxtec
- cortasetos Kibani
- cortasetos Grizzly
- cortasetos Cocraft
- cortasetos Maruyama
- cortasetos Batavia
- cortasetos Gardenline
- cortasetos Levita
- cortasetos Efco
- cortasetos Anova
- cortasetos Hurricane
- cortasetos EGO
- cortasetos Palmera
- cortasetos Eurogarden
- cortasetos Garden Feelings
- cortasetos Mr Gardener
- cortasetos Jonsered
- cortasetos LawnMaster
- cortasetos Ergotools Pattfield
- cortasetos G-Technology
- cortasetos Bestgreen
- cortasetos CMI
- cortasetos MacAllister
- cortasetos Maxbear
- cortasetos Yellow Garden Line
Últimos cortasetos Manuales
18 Octubre 2024
17 Octubre 2024
15 Octubre 2024
15 Octubre 2024
14 Octubre 2024
13 Octubre 2024
13 Octubre 2024
13 Octubre 2024
11 Octubre 2024
11 Octubre 2024