Satel S-3 Manual de Usario

Satel Sensor de movimiento/marco S-3

Lee a continuación 📖 el manual en español para Satel S-3 (2 páginas) en la categoría Sensor de movimiento/marco. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
S-1 / S-2 / S-3
MAGNETIC CONTACT
s123_en 08/19
The S-1 / S-2 / S-3 magnetic contact can detect opening of a door, window, etc. Additionally, it is
provided with a tamper loop. The S-1 magnetic contact is designed for surface mounting, and the S-2
and S-3 magnetic contacts – for flush mounting.
1. Description
The device consists of a contact (reed switch) and a magnet. Moving the magnet away from the
contact (opening the door or window) opens the reed switch contacts (thus triggering alarm).
Both magnetic contact elements are placed in identical waterproof enclosures. The S-1 and S-2
enclosures are made of plastic, while the S-3 enclosure is made of metal. The contact has 4 wires.
The two twisted wires are a tamper loop. The contacts are shown in the figures below.
2. Installation
The contact should be mounted on a fixed surface (e.g. window or door frame), and the magnet on
a movable surface (e.g. window or door). Do not install the magnetic contact on ferromagnetic
surfaces and near to strong magnetic and electrical fields, because it can result in malfunctioning of
the device. When mounting the magnetic contact, you must take into account the make distance.
The S-1 magnetic contact is designed for surface mounting. Place the contact and magnet in parallel
next to each other (Fig. 4). The magnetic contact elements can be attached with screws, double-sided
tape or glue.
The S-2 and S-3 magnetic contacts are designed for flush mounting in wood or plastic. Place the
contact and magnet facing each other (Fig. 5 – as shown by the example of S-3). To make holes for
2 S-1   S-2 S-3 SATEL
the magnetic contact elements, use a ø9 mm drill. Press the S-2 magnetic contact elements or screw
the S-3 magnetic contact elements into the holes made.
Notes:
Do not use a hammer to drive the contact into the hole (it may damage the reed switch).
When screwing the S-3 contact into the hole, the wires become twisted. To prevent them from
damage, twist the wires against the direction of screwing before installation.
magnet.
contact.
A – make distance.
B – permissible offset between contact and magnet axes: S-2 = 10 mm, S-3 = 12 mm.
C – minimum thickness of the wall in which magnetic contact elements can be mounted: 10 mm.
3. Specifications
Magnetic contact type......................................................................................................................... NC
Maximum switching voltage.............................................................................................................. 20 V
Maximum switching current ........................................................................................................... 20 mA
Contact resistance.......................................................................................................................150 mΩ
Minimum life expectancy (20 V, 20 mA) ......................................................................................360 000
Contact material ...............................................................................................................Ru (ruthenium)
Make distance S-1................................................................18 mm
S-2................................................................28 mm
S-3................................................................15 mm
Break distance S-1................................................................28 mm
S-2................................................................40 mm
S-3................................................................24 mm
Environmental class according to EN50130-5........................................................................................II
Operating temperature range ............................................................................................ -10°C...+55°C
Maximum humidity........................................................................................................................ 93±3%
Weight S-1....................................................................29 g
S-2....................................................................28 g
S-3....................................................................43 g
The declaration of conformity may be consulted at www.satel.eu/ce
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. +48 58 320 94 00
www.satel.eu

Especificaciones del producto

Marca: Satel
Categoría: Sensor de movimiento/marco
Modelo: S-3

¿Necesitas ayuda?

Si necesitas ayuda con Satel S-3 haz una pregunta a continuación y otros usuarios te responderán


Sensor de movimiento/marco Satel Manuales

Satel

Satel AMD-103 Manual de Usario

3 Septiembre 2024
Satel

Satel S-3 Manual de Usario

31 Agosto 2024

Sensor de movimiento/marco Manuales

Últimos Sensor de movimiento/marco Manuales

Ezviz

Ezviz T1 Manual de Usario

14 Octubre 2024
Schwaiger

Schwaiger HSA250 532 Manual de Usario

6 Octubre 2024
Optex

Optex OA-Flex T Manual de Usario

4 Octubre 2024
Kidde

Kidde K10LLDCO Manual de Usario

19 Septiembre 2024
Kidde

Kidde 2030-DCR Manual de Usario

19 Septiembre 2024
ORNO

ORNO OR-SH-17600 Manual de Usario

18 Septiembre 2024
ORNO

ORNO OR-SH-17601 Manual de Usario

18 Septiembre 2024
EMOS

EMOS THS916A Manual de Usario

17 Septiembre 2024
EMOS

EMOS GS827 Manual de Usario

17 Septiembre 2024
EMOS

EMOS GS869 Manual de Usario

17 Septiembre 2024