Satex SA 250 digital indicator Manual de Usario

Satex Balanza SA 250 digital indicator

Lee a continuación 📖 el manual en español para Satex SA 250 digital indicator (20 páginas) en la categoría Balanza. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

Patroonsweg 23-27

3892 DA Zeewolde - Holland

Tel. +31 36 522 20 30

Fax. +31 36 522 20 60

Email info@weegtechniek.nl

Website www.wee

techniek.nl

- Manual

SATEX SA 250

Digital indicator

Weegtechniek

holland b.v.

Manual Indicator SA 250

pag. 0

PCG/C SA 250 Indicator Manual 23-03-07

INDEX

General.......………………………………………………………… 1

Application, Weight and Measures Certification………………… 1

Safety…..……………………………………………………………. 1

Maintenance.……………………………………………………….. 1

Start up…….. ……………………………………………………… 2

Technical specifications….………………………………………… 2

Display: keys and display symbols...…..……..…………………. 3

Switching on………………………………………………………… 4

Set zero……………………………………………………………… 4

Tare…...……………………………………………………………… 4

Check weighing……...……………………………………………… 5

Counting parts..……………………………………………………… 5

Hi-Lo check weighing………………………………………………. 5

Hold function….…..………………………………………………… 6

Printing / sending data...…………………………………………… 7

USER MODE

Automatic zero (zero track)………………………………………… 8

Automatic switch off (auto off).......………………………………. 8

Back light display……………...……………………………………. 9

Initial zero setting……………………………………………………. 9

Display speed……………………………………………………….. 9

Printer / RS 232 data output…..…………………………………… 10

Disable double printing…………………………………………….. 10

Extra line feeds …………………………………………………….. 10

Baud rate……………………………………………………………. 11

Hi-Lo setting : on/off , “beeps”……………………………………. 11

CALIBRATION MODE

Divisions…………..………………………………………………… 12

Lock up weight value………………………………………………. 13

Choice calibration procedure……………………………………… 13

One Point calibration...……………………………………………. 14

Multi Points calibration…………………………………………….. 15, 16

RS output, Data communication…………………………………. 17

Loadcell connection.………………………………………………. 17

Malfunctions and error codes……………………………………… 18

WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel + 31 36 522 20 30

Patroonsweg 23-27 Email info@ weegtechniek.nl Fax + 31 36 522 20 60

3892 DA ZEEWOLDE The Netherlands

pag. 1

Manual Indicator SA 250

PCG/C SA 250 Indicator Manual 23-03-07

General

Thank you for purchasing this SATEX precision digital indicator !

This instrument is equipped with reliable technology and has user friendly operational software.

You will use it many times and it will prove itself to be an easy, speedy and accurate tool.

If any questions raise that are not described in this manual, please address yourselves to your SATEX supplier,

have a look at our website : www.satex.nl or send your questions per email to : info@satex.nl

Application, Weight and Measures certified

The SA 250 digital indicator is designed for accurate and legal weighing, for counting of articles and

for check weighing and filling with settable weight setpoints with LED indicators in the front panel.

The indicator is designed for use in dry, inside conditions, class IP 54. Any 2 mV/V loadcell may be connected

to the indicator.

Take care of a stable position of the connected weighing equipment. Place the equipment in accurate level position

and prevent for vibrations, shocks and radio radiations.

The CE (OIML R76 1992 class III) Certificate of this scale is valid in all European countries.

It is permitted to use a scale, if stamped individually, for weighing for trade purposes.

Safety

Please read this manual thoroughly before start using the scale.

The supplier does not accept any responsibility if the guidelines of this manual are not observed.

Before any work is done on the indicator, power connections from the mains adaptor and the internal battery should

be interrupted. Warranty is void if the scale is opened anyhow.

Breaking of the seal of a stamped scale is a criminal act and causes the complete disapproval of the scale.

The instrument fulfils the requirements laid down in the EG regulations 89/336/EWG and 73/23/EWG for

electromagnetic compatibility and the Council Directive 90/384/EEC for not automatic weighing machines. Exceeding

of the maximum values, laid down in these regulations, must be avoided.

Electrostatic discharges may cause fatal damage to the scale and should be avoided

at all times. I.e. a proper earth connection of the scale and the place of erection is required in such cases.

The mains adaptor has no special protection against humidity and water and should not come into contact with it.

In case this has happened, or the adaptor shows any external damage, the adaptor should not be used any longer.

The built in lead battery should, if it has to be replaced, be disposed off as small chemical waste, not to be added to

normal waste.

Maintenance

Except from regular cleaning with a slightly humid cloth and a not aggressive detergent, further maintenance

is not required. No liquids has to be applied upon the instrument.

However it makes sense to check a scale’s weighing accuracy with regular intervals, using accurate calibration

weights.

Stamped scales are sealed, but a not stamped scale may be adjusted by the user itself using accurate Class M1

weights.

WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30

Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60

3892 DA ZEEWOLDE The Netherlands

Especificaciones del producto

Marca:	Satex
Categoría:	Balanza
Modelo:	SA 250 digital indicator
Ancho:	305 mm
Profundidad:	234 mm
red LAN:	Ja
Resolución Máxima:	4096 x 2304 Pixels
Cables suministrados:	SATA
Número de puertos USB 2.0:	4
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
Versión HDMI:	1.4b
Número de DisplayPorts:	1
Soporta Windows:	Windows 10 x64
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Zócalo del procesador:	LGA 1200 (Socket H5)
Fabricante del procesador:	Intel
Memoria interna máxima:	128 GB
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo C:	1
Canales de salida de audio:	7.1 kanalen
ETC:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel H470
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo A:	1
Versión DisplayPort:	1.4
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC887
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x16 (Gen. 3.x):	2
Ranuras PCI Express x1 (Gen 3.x):	4
Interfaces de unidad de almacenamiento compatibles:	SATA III
Puerto(s) PS/2:	1
Componente para:	PC
Controlador LAN:	Realtek RTL8111H
Tipos de incursión:	0, 1,5, 10
Número de conectores SATA III:	6
No ECC:	Ja
Activación de la LAN:	Ja
Procesadores compatibles:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Tipos de memoria soportados:	DDR4-SDRAM
Máx. número de procesadores SMP:	1
Wifi.:	Nee
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	2133,2400,2666,2800,2933 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	128 Mbit
Soporte para procesamiento paralelo:	2-Way CrossFireX
Conexiones COM:	1
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	3
Conector de alimentación ATX (24 pines):	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	2
Conector TPM:	Ja
Salida-S/PDIF:	Ja
Borrar puente CMOS:	Ja
Número de ranuras M.2 (M):	2
Carril de conexión LED RGB:	Ja
Cabezales Thunderbolt:	1