Sauter FK 500 Manual de Usario

Sauter No categorizado FK 500

Lee a continuación 📖 el manual en español para Sauter FK 500 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Instruction Manual

AS, 03.04.2008 FK GB.doc Page 1 of 3

Thank you for buying a SAUTER force gauge. We hope

you are pleased with your high quality force gauge with its

big functional range. If you have any queries, wishes or

helpful suggestions, do not hesitate to call our service

number.

„Sensor Inside“ means the measuring cell is inside the

housing.

Included in delivery

- SAUTER FK

- Charger

- Standard Attachments as shown below

Terms:

Track = continuous measurement

Peak = Capture of the maximum value

Data in mm

Working Conditions

10°C to 30°C / 15% up to 80% humidity

Electrical Power Supply

Either by recharchable battery or current power supply

Current power supply:

- Connection by power adapter

- Recharchable batteries are charged

simultaneously

Recharchable battery pack for mobile applications:

- Type: AA Size 6 Batteries

- Charging time: approx 1 hour

Technical Data

- Accuracy: ± 0,5 % of Capacity

- Data Sampling Rate: 1.000 Hz

Model Capacity Resolution

FK 10 10 N 0,005 N

FK 25 20 N 0,010 N

FK 50 50 N 0,020 N

FK 100 100 N 0,050 N

FK 250 200 N 0,100 N

FK 500 500 N 0,20 N

FK 1k 1 000 N 0,50 N

Sensor

Inside

LCD

Force Sensor

195 mm

83 mm

Instruction Manual

AS, 03.04.2008 FK GB.doc Page 2 of 3

Operation

a. Display

(1) Measuring Result

(2) Measuring Units

(3) Measuring Direction

(4) Indication of PEAK Mode

b. Operating keys

ON / OFF:

ON / OFF key

(For ON, press 1 sec.)

MAX:

Changes between Track and Peak mode (capture of

maximum values)

UNIT:

- Press short: Select unit:

N, kg, lb, ou

ZERO:

- Zeros the measuring result (Tara function)

- Cleans the peak value (in Peak mode)

c. Display Return

When the instrument itself is turned so that the head faces

down, the display returns automatically.

d. Measurement (Track Modus)

Display (1) shows the continuous force in a dened

direction (3)

To zero the display, press:

e. Peak-Hold Function (Peak Mode)

Please press:

Backside Fixing to a test stand

Fixing by 4 x M3 scres.

CE Declaration of Conformity

(1)

(2)

(3)

(4)

Instruction Manual

AS, 03.04.2008 FK GB.doc Page 3 of 3

8. Warning

2.1 Intended use

The instrument you have acquired serves to determine the

measuring value of the material to be measured. It is

intended to be used as a “non-automatic“ instrument, i.e.

the material to be measured is manually and carefully

attached at the instrument. The measuring value can be

read o after a stable measuring value has been obtained.

2.2 Inappropriate use

Do not use the instrument for dynamic measuring. In the

event that small quantities are removed or added to the

material to be

measured, incorrect measuring results can be displayed

due to the “stability compensation“ in the instrument.

(Example: Slow draining

o of liquid from a container suspended from the

instrument). Do not attach a continuous load. This can

damage the measuring

unit as well as the parts, relevant to safety.

Prevent jolts, torsion and oscillation (e.g. by appending

slopingly) of all kinds. Be sure to prevent overloading the

instrument in excess of the stated maximum load (max.),

minus any tare weight that may possibly exist. This could

damage the instrument (risk of breakage).

Important:

• Always make sure that there are no people or materials

below the load that could be injured or damaged!

• The instrument is not suitable for measuring people. Do

not use as baby scales!

• The instrument does not comply with the medical product

law (MPG).

Never operate the instrument in hazardous locations. The

series design is not explosion-proof. Structural alterations

may not be

made to the instrument. This can lead to incorrect

measuring results, faults concerning safety regulations as

well as to destruction

of the instrument. The instrument may only be used in

compliance with the described guidelines. Varying areas of

application/

planned use must be approved by SAUTER in writing.

2.3 Guarantee

The guarantee is not valid following

• non-observation of our guidelines in the operating

instructions

• use outside the described applications

• alteration to or opening of the device

• mechanical damage and damage caused by media,

liquids

• natural wear and tear

• inappropriate erection or electric installation

• overloading of the measuring equipment

2.4 Monitoring the test substances

The metrology features of the instrument and any possible

available adjusting weight must be checked at regular

intervals within the scope of quality assurance. For this

purpose, the answerable user must define a suitable

interval as well as the nature and scope of this check.

Information is available on

the home page ( ) with regard to the www.KERN-sohn.com

monitoring of instrument test substances and the test

weights required for this. Test weights and instruments can

be adjusted quickly and at a reasonable price in KERN’s

accredited DKD calibration laboratory (return to national

normal).

3. Fundamental safety information

Do not use the hanging instrument to transport loads.

Prevent jolts, torsion and oscillation (e.g. by appending

slopingly) of all kinds.

Never use the hanging instrument over the maximum

permitted weight (!!Danger of breaking!!).

Always make sure that there are no living beings or

materials below the load that could be injured or damaged.

The hanging electronic instruments from the SAUTER

instrument are only suitable for hand-held use or use in a

test stand.

They are not suitable for hanging from a mechanical hook,

e.g. a crane hook.

3.1 Observe the information in the operating instructions

Please read the operating instructions carefully before

erecting

and commissioning, even if you already have experience

with SAUTER instruments.

3.2 Sta training

The device may only be operated and looked after by

trained members of sta.

Especificaciones del producto

Marca:	Sauter
Categoría:	No categorizado
Modelo:	FK 500
Color del producto:	Zwart
Peso.:	1400 g
Ancho:	123 mm
Profundidad:	123 mm
Altura:	234 mm
Peso del embalaje:	2200 g
Ancho del embalaje:	175 mm
Empaquetadura en profundidad:	175 mm
Altura del embalaje:	332 mm
Sistemas operativos móviles compatibles:	Android 2.3, Android 3.0, Android 3.1, Android 3.2, Android 4.0, Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1, iOS 6.1, iOS 7.0, iOS 8.0, iOS 8.2, iOS 9.0
Bluetooth:	Ja
Formato de audio soportado:	AAC, AIFF, ALAC, FLAC, MP3, OGG, WAV, WMA
Tecnología de conectividad:	Draadloos
Tipo de fuente de energía:	AC
Cables suministrados:	AC
Energía promedio:	- W
Consumo de energía (en espera):	2.5 W
Número de hablantes:	1
Corriente de entrada:	Ja
Cantidad por paquete:	1 stuk(s)
Uso recomendado:	Mobiele telefoon/smartphone
Impedancia:	- Ohm
Canales de salida de audio:	- kanalen
Número de conductores:	2
Rango de frecuencia:	- Hz
Bitsnelheden MP3:	32 - 320 Kbit/s
Bitsnelheden WMA:	32 - 192 Kbit/s
Diámetro del altavoz de graves:	88 mm
Diámetro hogetonenluidspreker:	25 mm
Wifi.:	Ja
Consumo de energía (típico):	10 W