Scott LSX 10 Manual de Usario

Scott Base/estación de acoplamiento LSX 10

Lee a continuación 📖 el manual en español para Scott LSX 10 (4 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
MODEL NO.: LSX 10
WIRELESS LED LIGHT WITH SPEAKER
Instruction Manual
GB-1
PRECAUTIONS
Follow the instructions below to ensure the product is used safely and correctly.
PLACEMENT
. Do not use the unit in places which are extremely hot, cold, dusty, or humid.
. Do not restrict the airflow around the unit by placing it in a place with poor ventilation.
. Do not place the unit close to heat sources.
. Use the apparatus only in moderate climates.
. Do not expose the unit to rain or splash with water.
. Do not place objects filled with liquids, such as vases on the unit.
AC VOLTAGE
. Before use, check that the rated voltage of your unit matches your local voltage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an
arrowhead symbol within
a triangle is a warning
sign alerting the user to
the presence of
“dangerous voltage”
inside the unit.
ATTENTION: To reduce the
risk of electric shock, do not
remove the cover. There are no
user serviceable parts inside
the unit. Refer all servicing to
qualified personnel.
The exclamation mark
within a triangle is a
warning sign alerting the
user to the presence of
important instructions
accompanying the
product.
Congratulations on your purchase of this additional wireless light with loud
speaker that we hope will fully meet your requirements. It will allow you to
improve iDXS 10L / iXSW 50 system.
TABLE OF CONTENTS
PRECAUTIONS 1
TABLE OF CONTENTS 1
BOX CONTENTS 2
LOCATION OF CONTROLS 2
POWER SUPPLY AND INSTALLATION 2
BASIC OPERATION 2
MAINTENANCE 3
TROUBLESHOOTING GUIDE 3
TECHNICAL SPECIFICATIONS 3
GB-2
BOX CONTENTS
1. LED Light with speaker
2. Pin for pairing 3. Instruction manual
LOCATION OF CONTROLS
LED light with speaker
1. E27 screw
2. LED light
3. Pair button
4. Standby LED
5. Speaker
POWER SUPPLY AND INSTALLATION
LED light with speaker
Make sure the power source is switched off before installation.
Screw the LED light with speaker to an E27 socket with an AC 100-240V ~
50/60Hz power source.
Note: Do not use your external dimmer control that may cause the unit
malfunction. To dim the light, press the button repeatedly.
BASIC OPERATION
Note: This LED light with speaker must be used with the docking station -
SCOTT model no.: iDXS 10L or iXSW 50. Refer to the instruction manual of
the docking station for detail operation.
Standby/On mode
Device Standby On
LED light with
speaker
Standby LED:
LED light: On
Off Off
On
PAIRING
Note: Make sure that the LED light with speaker is powered properly. Refer to the
manual of your iDXS 10 L or iXSW 50 system for more information about pairing.
Pairing is to ensure your LED light with speaker can receive RF transmission
correctly from the docking station.
1. If you want to pair this new light in an existing group (one station + 2 lights to
get stereo sound), you have to reset the pairing first: when the docking station
is in standby mode, use the piece (supplied) to press and hold the PAIR button
of the docking station for more than 10 seconds until the source LEDS at the
top of the docking station flash. The station then goes back to standby mode.
2. Press the PAIR buttons briefly at the bottom of the docking station first and
then the other devices within one minute. All the standby LEDs will blink rapidly
until the pairing is successful in about one minute and the source LEDS at the
top of the docking station will flash for few seconds.
3. For pairing the next group, repeat above step (2).

Especificaciones del producto

Marca: Scott
Categoría: Base/estación de acoplamiento
Modelo: LSX 10

¿Necesitas ayuda?

Si necesitas ayuda con Scott LSX 10 haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Scott Manuales

Scott

Scott LSX 10 Manual de Usario

13 Agosto 2024
Scott

Scott I-CX 3 Manual de Usario

9 Agosto 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024