SE Electronics guitaRF Manual de Usario

Lee a continuación 📖 el manual en español para SE Electronics guitaRF (5 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
guitaRF ASSEMBLY + USE
guitaRF aS SEMBLY Ma Nua L
sE Electronics guitaRF™ Assembly + Use
Thank you for purchasing an sE Electronics guitaRF! We hope it helps
make your records and live shows sound great, and makes recording
guitars & bass (and anything else!) that much easier for you.
STEP ONE
w the vertical standoff into the
om of the lter, making sure the
side of the standoff is aligned with
back of the lter. Use the included
nch to adjust the tightening nut on
standoff (a) to make sure they’re
ned properly.
STEP TWO
Making sure the at side of the
standoff is facing the screw on the
back of the base stand, insert the
standoff (with the lter attached) into
the base, and tighten it securely in
place with one of the two included
smaller screws (b).
(b)
(a)
Alternatively, the guitaRF can be mounted
to any standard mic stand thread, 5/8” or
3/8” (with the included 3/8” adapter).
guitaRF aS SEMBLY Ma Nua L
sE Electronics guitaRF™ Assembly + Use
STEP THREE
Use the second of the smaller screws
(c) to tighten the vertical adjustment
rod (d) to the hardware. This screw/
rod can be used to raise or lower the
condenser or ribbon hung from the
guitaRF hardware, with (e) used to
move it towards or away from the lter.
(c)
(d)
(e)
(f)
(g)
STEP FOUR
Attach the hardware to the top of
the guitaRF with the included larger
screw (f), rubber washer on top of the
bracket, and paper washer underneath.
This screw can be used to rotate the
hardware mount relative to the lter.
STEP FIVE
Insert your dynamic or small-capsule
mic into the pass-through hole of the (g)
guitaRF. It should t snugly.
Screw your condenser or ribbon’s mic
clip (or shockmount) onto the hanging
vertical adjustment rod (d), and then use
(c) (e) (f) , and to ne-tune the position of
the hanging mic relative to the dynamic/
small-capsule mic.

Especificaciones del producto

Marca: SE Electronics
Categoría: No categorizado
Modelo: guitaRF
Color del producto: Zwart
Peso.: - g
Ancho: - mm
Profundidad: - mm
Altura: - mm
Diagonal de la pantalla: 1.8 "
Pantalla táctil: Nee
Tiempo de reproducción de audio continuo: - uur
Formato de audio soportado: MP3, WMA
Grabación de vídeo: Ja
Radio FM: Ja
Formato de imagen soportado: JPG
Capacidad total de almacenamiento: 4 GB
Recargable: Ja
Tecnología de batería: Lithium-Ion (Li-Ion)

¿Necesitas ayuda?

Si necesitas ayuda con SE Electronics guitaRF haz una pregunta a continuación y otros usuarios te responderán




No categorizado SE Electronics Manuales

No categorizado Manuales

Últimos No categorizado Manuales