SE Electronics sE8 Manual de Usario

SE Electronics micrófono sE8

Lee a continuación 📖 el manual en español para SE Electronics sE8 (24 páginas) en la categoría micrófono. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/24
sE8
U s e r M a n u a l
2
User Manual - EN
Thank Y ou
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few
minutes to read the instructions below carefully. We hope you will enjoy working with it as much
as we enjoyed designing and building it for you.
Most Sincerely,
Your sE Team
Brief Description
The sE8 is a high-quality small diaphragm condenser microphone intended for a wide range of
studio and live sound applications, from acoustic guitars to pianos to drums and beyond. Thanks
to its custom design, hand-crafted true condenser capsule, and transformerless output, it delivers
pristine sound quality and an even, well-balanced frequency response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high
sound pressure level (SPL) handling capability and extremely low-noise components. The
switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an
excess of bass frequencies caused by the proximity effect. This enables the sE8 to close-mic
many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by
the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.
What’s in the box
Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
sE8 (Single)
• sE8 microphone
• mic clip (with thread adapter)
• wind screen
sE8 (Matched Pair)
• 2x sE8 microphone
• 2x mic clip (with thread adapters)
• 2x wind screens
• stereo bar
• metal case
Controls
The sE8 features a switch for the attenuation pads and a switch for the low-cutfilters.
Attenuation Switch
The Attenuation Switch is located on the upper back side of the
microphone. When switched on, the incoming signal is reduced by
either 10 or 20 dB for capturing of loud instruments and/or close-
miking without distortion. Using the switch also helps prevent
overloading the input stage of recording interfaces, mixing desks and
microphone preamps.
3
Low-Cut Switch
The Low-Cut Switch is located on the front-right side of the
microphone, and inserts a low-cut filter at 80Hz (top position) or
160Hz (bottom position). The switch’s center position removes the
filter for a flat frequency response. Wind noise, plosives, footfall noise
or rumble might affect the recorded signal, so enabling the low-cut
filters reduces such unwanted noise and prevents distortion.
Additionally, the low-cut filters also minimize the proximity effect
when recording sound sources at a very short distance.
Powering
To ensure proper operation, the microphone requires a phantom power source providing 48 Volts
according toIEC 61938.
Risk of damage
Do not connect the microphone to any power supply other than a
phantom power source (input with phantom power or external IEC
standard phantom power supply) with a floating connector, using a
balanced cable with studio grade connectors to IEC 268-12 only. This is
the only way to ensure safe and reliable operation.
Safety and maintenance
Risk of damage
Please make sure that the piece of equipment to which your microphone
will be connected fulfils the safety regulations enforced in your country
and is fitted with a ground lead.
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specification
Capsule
Hand-crafted small diaphragm true condenser capsule
Polar patterns
Cardioid
Frequency range
20 – 20,000 Hz
Sensitivity
25 mV/Pa (-32 dBV)
Max. SPL (0.5% THD)
139 / 149 / 159 dBSPL(0/10/20 dB Attenuation pad)
Equivalent noise level
13 dB(A)
Dynamic range
126 / 136 / 146 dB (0/10/20 dB Attenuation pad)
Signal- -noise ratio to
81 dB
Low cut filter
80 / 160 Hz, 6 dB/Oct, switchable

Especificaciones del producto

Marca: SE Electronics
Categoría: micrófono
Modelo: sE8

¿Necesitas ayuda?

Si necesitas ayuda con SE Electronics sE8 haz una pregunta a continuación y otros usuarios te responderán


micrófono SE Electronics Manuales

SE Electronics

SE Electronics V7 BFG Manual de Usario

18 Septiembre 2024
SE Electronics

SE Electronics V7 V3 Manual de Usario

18 Septiembre 2024
SE Electronics

SE Electronics V2 Switch Manual de Usario

14 Septiembre 2024
SE Electronics

SE Electronics T1 Manual de Usario

13 Septiembre 2024
SE Electronics

SE Electronics DM2 TNT Manual de Usario

13 Septiembre 2024
SE Electronics

SE Electronics sE4100 Manual de Usario

13 Septiembre 2024
SE Electronics

SE Electronics V7 MC2 Manual de Usario

12 Septiembre 2024
SE Electronics

SE Electronics V7 MC1 Manual de Usario

12 Septiembre 2024
SE Electronics

SE Electronics VR2 Manual de Usario

12 Septiembre 2024
SE Electronics

SE Electronics Harp Blaster HB52 Manual de Usario

12 Septiembre 2024

micrófono Manuales

Últimos micrófono Manuales

Shure

Shure SBC210LM Manual de Usario

25 Octubre 2024
Akg

Akg GN50 M Manual de Usario

25 Octubre 2024
Countryman

Countryman B6 Manual de Usario

19 Octubre 2024
Pyle

Pyle PMKSHUSB04 Manual de Usario

19 Octubre 2024
Trust

Trust 21670 Manual de Usario

18 Octubre 2024
Neumann

Neumann U 87 Ai Manual de Usario

18 Octubre 2024
BOYA

BOYA BY-PM700 Manual de Usario

18 Octubre 2024
Audio-Technica

Audio-Technica BP892xCW Manual de Usario

17 Octubre 2024
Audio-Technica

Audio-Technica BP4073 Manual de Usario

15 Octubre 2024
Power Dynamics

Power Dynamics PD524 Manual de Usario

15 Octubre 2024