Seco-Larm SD-969-S18Q Manual de Usario

Lee a continuación 📖 el manual en español para Seco-Larm SD-969-S18Q (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
®
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale to the original customer.
SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused
by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM
determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s
exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential ’s option.
personal or property damage of any kind to the purchaser or anyone else.
Armored Door Cords
Installation Manual
SD- -T15Q/S shown 969
Also Available from ®:
Door Strikes
Push- -Exit Bars to
SD-995C Shown
SD- -36 Shown 961A
Maglocks
Deadbolts
E-941SA- Shown 600
SD- -GBQ Shown 997B
Armored Door Cord with Plastic End Caps, Silver
SD- -A18Q 969
Plastic end caps
Designed to carry wiring to conduct power to
electric locks or access systems mounted in doors
Mounting screws included
Surface-mount
16” (41cm) Stainless steel armored cord
Inside door-cord diameter: 5/16" (8mm)
Outside door-cord diameter: 7/16" (1 mm)1
Armored Door Cord with Die-Cast Aluminum End Caps, Silver
SD- -S18Q 969
Die-cast aluminum end caps
Designed to carry wiring to conduct power to
electric locks or access systems mounted in doors
Mounting screws included
Surface-mount
17 3cm) Stainless steel armored cord ” (4
Inside door-cord diameter: 5/16" (8 mm)
Outside door-cord diameter: 1/2" (1 mm)3
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662- 0800
Email: sales@seco-larm.com
All trademarks are the property of SECO-LARM U.S,A., Inc. or their respective owners. The SECO-LARM policy is one of continual development and improvement. For that reason,
SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is also not responsible for misprints.
Copyright © 2016 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.
®
PITGW1
MI_SD- -x1xQ_160727.docx969
Armored Door Cord with Terminal Blocks and Removable Die-Cast Aluminum End Caps
SD- -T15Q/B Bronze 969
SD- -T15Q/S Silver 969
Designed to conduct power to electric locks or
access systems
Once mounted, to access, simply remove cover.
Door cord stays in place. No need to remove
from the door. Prevents stripping of the screws
and mounting points
Surface-mounted
Terminal blocks with pre-wired cables (8
connections) for quick, easy, and secure
installation
Maximum current 3A@30VAC/VD C
15” (39cm) Stainless steel armored cord
Inside door-cord diameter: 5/16" (8mm)
Outside door-cord diameter: 7/16" (11mm)
Security screws (included) prevent tampering
Available in bronze silver finish or
SD- -T15Q/S shown 969
Note: Each terminal is wired on a one to one basis, meaning that
whatever is wired to a particular terminal number on one block will
be connected the same terminal number on the other block. to
Sample Wiring Diagram
Armored Door Cord with Removable Die-Cast Aluminum End Caps
SD- -M15Q/B shown 969
SD- -M15Q/B Bronze 969
SD- -M15Q/S Silver 969
Designed to carry wiring to conduct power to
electric locks or access systems
Once mounted, to access, simply remove cover.
Door cord stays in place. No need to remove
from the door. Prevents stripping of the screws
and mounting points
Surface-mounted
15” (39cm) Stainless steel armored cord
Inside door-cord diameter: 5/16" (8mm)
Outside door-cord diameter: 7/16" (11mm)
Security screws (included) prevent tampering
Available in bronze silver finish or

Especificaciones del producto

Marca: Seco-Larm
Categoría: No categorizado
Modelo: SD-969-S18Q
Color del producto: Zwart
Peso del embalaje: 29970 g
Ancho del embalaje: 1620 mm
Empaquetadura en profundidad: 163.1 mm
Altura del embalaje: 990.1 mm
Sensor de luz ambiental: Ja
Interruptor encendido / apagado: Ja
Control remoto: XRT136
Diagonal de la pantalla: 64.5 "
Resolución: 3840 x 2160 Pixels
Relación de aspecto original: 16:9
Número de núcleos de procesador: 8
Estándares wifi: Wi-Fi 5 (802.11ac)
Incluye sistema operativo: SmartCast OS
red LAN: Ja
Formatos de compresión de vídeo: H.265, HEVC, VP9
Ángulo de visión, horizontal: 178 °
Ángulo de visión, vertical: 178 °
Forma de pantalla: Flat
Brillo: - cd/m²
Número de puertos USB 2.0: 1
Número de puertos HDMI: 4
Vídeo de componentes (YPbPr/YCbCr): 1
Puerto DVI: Nee
Número de puertos Ethernet LAN (RJ-45): 1
Televisión inteligente: Ja
Altavoces incorporados: Ja
Energía promedio: 30 W
Consumo de energía (en espera): 0.5 W
Número soportado de baterías/baterías: 2
Número de hablantes: 2
Salidas de auriculares: 1
Certificación: UL, cUL, FCC B, BETS-7/ICES-003 B, IC
Pantalla, número de colores.: 1.073 biljoen kleuren
Soporte HDR: Ja
tipo HD: 4K Ultra HD
3D: Nee
Tecnología de visualización: LED
Tiempo de respuesta: - ms
Montaje VESA: Ja
Interfaz de montaje en panel: 400 x 200 mm
Relación de contraste (dinámica): 20000000:1
Profundidad (sin base): 60.7 mm
Altura (sin base): 829.8 mm
Ancho (sin base): 1447.8 mm
Peso (sin base): 23580 g
Visualización en pantalla (OSD) -talen: ENG, ESP, FRE
Diámetro de la pantalla en centímetros.: 163.83 cm
Entrada de PC (D-Sub): Nee
Audio digital, salida óptica.: 1
Interfaz común Plus (CI+): Nee
televisión por internet: Ja
Ancho del dispositivo (con soporte): 1447.8 mm
Dispositivo de profundidad (con soporte): 277.4 mm
Altura del dispositivo (con soporte): 895.1 mm
Peso (con soporte): 23980 g
Escalador 4K Ultra HD: Ja
Visualización en pantalla (OSD): Ja
Número de idiomas de visualización en pantalla: 3
Canal de retorno de audio (ARC): Ja
Interfaz común (CI): Nee
Frecuencia de actualización nativa: 120 Hz
guía de votación: Ja
Mando a distancia incluido: Ja
Wifi.: Ja
voltaje-de-entrada-de-CA: 120 V
Consumo de energía (típico): 102.8 W
Baterias-incluidas: Ja
Tipo de Batería: AAA
Tecnología de atenuación para retroiluminación.: Local Dimming

¿Necesitas ayuda?

Si necesitas ayuda con Seco-Larm SD-969-S18Q haz una pregunta a continuación y otros usuarios te responderán




No categorizado Seco-Larm Manuales

No categorizado Manuales

Últimos No categorizado Manuales